臺灣博碩士論文加值系統

過去企業的優勢取得於自身競爭力的加強，因此皆是以個人的立場來考慮如何減少成本、增加利潤。但是今非昔比，單單只是提昇競爭力稍嫌不足，尚需要企業間的合作。因此在現今市場交易中常常看到的現象之一，就是製造商會提供給零售商一延遲付款期限，不需要立即付錢，於期限到時再付即可。且在期限內賣出的商品享有不需支付利息的好處，而對於製造商也會有吸引零售商購買其商品的好處。

本論文的目的是尋求零售商及製造商雙方在和諧的合作關係下，以一次訂購、多次運送且需求為固定及商品會損耗，再加上運送成本由零售商負責時，推導出一受延遲付款期限影響的供應鏈存貨模式。之後再延伸考慮通貨膨脹因素，亦即供應鏈存貨模式受到通貨膨脹的影響。

最後，將推導出的成本數學模式藉由程式語言的撰寫並搭配範例之相關參數，即可搜尋到聯合總成本的最佳解。再透過敏感度分析以了解各參數對存貨模式的影響。

Enterprises used to focus on individual performance to increase their competitiveness. They go about minimizing cost or maximizing profit from their own perspective. In modern market, the strategy is not enough to enhance their competitiveness. The cooperation among companies is vital in improving the effective of the supply chain. One of the phenomena in the cooperative business transactions is that retailers are allowed a grace period to pay back for the goods bought without paying any interest. During the grace period, the retailer doesn’t need to pay interest on goods held. For manufacturer, it has the benefit of attracting the retailer to purchase its goods in large batches.

The thesis develops a supply chain model for deteriorating items with permissible delay in payments in collaboration with the retailer and the manufacturer. A model is then developed to consider inflation and how it influences the model.

The objective of this study is to minimize the joint cost from the perspective of both the retailer and the manufacturer. Sensitivity analysis is carried out to see how these parameters influence the supply chain model .

中文摘要………………………………………………………………….i
英文摘要…………………………………………………………………ii
誌謝……………………………………………………………………...iii
目錄……………………………………………………………………...iv
表目錄…………………………………………………………………...vi
圖目錄………………………………………………………………….viii

第一章緒論……………………………………………………………..1
1.1研究背景與動機………………………………………………..1
1.2研究目的與範圍………………………………………………..2
1.3研究方法與步驟………………………………………………..3
1.4論文章節概要…………………………………………………..3

第二章文獻探討………………………………………………………..6
2.1 損耗性存貨模式之相關文獻………………………………….7
2.2 多批量運送之相關文獻……………………………………….8
2.3 供應鏈存貨模式之相關文獻………………………………….9
2.4 延遲付款期限之相關文獻…………………………………...10
2.5 通貨膨脹及時間價值之相關文獻…………………………...10

第三章損耗性商品在延遲付款期限下之供應鏈存貨模式…………12
3.1 模式之基本假設與符號說明………………………………...12
3.2 存貨模式之推導……………………………………………...15
3.2.1 零售商存貨模式的推導………………………………15
3.2.2 製造商存貨模式的推導………………………………18
3.2.3 求解過程………………………………………………21
3.3 數值範例之說明……………………………………………...22
3.4 敏感度分析…………………………………………………...28
3.4.1 零售商及製造商聯合總成本之敏感度分析…………28
3.4.2 零售商及製造商聯合總成本之敏感度分析彙整……39
3.4.3 考慮三種不同立場下聯合總成本之敏感度分析比較
………………………………………………………..41
3.5 本章結論……………………………………………………...47


第四章考慮通貨膨脹並受延遲付款期限影響之損耗性供應鏈存貨模式………………………………………………………………48
4.1 模式之基本假設與符號說明………………………………...48
4.2 存貨模式之推導……………………………………………...49
4.2.1 零售商存貨模式的推導………………………………49
4.2.2 製造商存貨模式的推導………………………………52
4.2.3 求解過程………………………………………………54
4.3 數值範例之說明……………………………………………...55
4.4 敏感度分析…………………………………………………...68
4.4.1 零售商及製造商聯合總成本之敏感度分析…………68
4.4.2 考慮三種不同立場下聯合總成本之敏感度分析比較
………………………………………………………..78
4.5 本章結論……………………………………………………...81

第五章總結與未來研究方向…………………………………………82
5.1 總結…………………………………………………………...82
5.2 未來研究方向………………………………………………...83

參考文獻………………………………………………………………..84
作者簡介………………………………………………………………..88

[1] 石志強(2000)，在延遲付款期限下的損耗性存貨模式，私立中原大學工業工程研究所碩士論文。[2] 林秀宜(1998)，應用Stackelberg均衡在多次配送環境下建立價格折扣存貨模式，國立中央大學工業管理所碩士論文。[3] 林賜德(1998)，以現值觀點探討生產及存貨模式，國立台灣科技大學管理技術研究所工業管理學程博士論文。[4] 吳玫瑩(1999)，損耗性商品在多批量運送下買賣雙方之存貨模式，私立中原大學工業工程研究所碩士論文。[5] 陳偉台(2001)，整合多供應商之三階損耗性商品存貨模式，私立中原大學工業工程研究所碩士論文。[6] 楊伯中(2000)，整合性供應鏈中損耗品存貨策略，私立中原大學工業工程研究所博士論文。[7] Aggarwal, S. P. and Jaggi, C. K., 1989, “Ordering policy for decaying inventory”, International Journal of Systems Science, Vol. 20, No. 1, pp. 151-155[8] Bessler, S. A. and Veinott, A. J., 1966, “Optimal policy for a multi- echelon inventory model”, Naval Research Logistics Quarterly, Vol. 13, pp. 355-389[9] Buzacott, J. A., 1975, “Economic order quantities with inflation”, Operational Research Quarterly, Vol. 26, pp. 553-558[10] Chandra, M. J. and Bahner M. L., 1985, “The effects of inflation and time value of money on some inventory systems”, International Journal of Production Research, Vol. 23, No. 4, pp. 723-730[11] Chu, P., Chung, K. J. and Lan, S. P., 1998, “Economic order quantity of deteriorating items under permissible delay in payments”, Computers and Operations Research, Vol. 25, No. 10, pp. 817-824[12] Chung, K. J., 1996, “Optimal ordering time interval taking account of time value”, Production Planning and Control, Vol. 7, No. 3, pp. 264-267[13] Chung, K. J. and Ting, P. S., 1994, “On replenishment schedule for deteriorating items with time-proportional demand”, Production Planning and Control, Vol. 5, No. 4, pp. 392-396.[14] Clark, A. J. and Scarf, H., 1960, “Optimal policy for a multi-echelon inventory problem”, Management Science, Vol. 6, pp. 475-490[15] Cohen, M. A., 1977, “Joint pricing and ordering policy for exponentially decaying inventory with know demand”, Naval Research Logistics Quarterly, Vol. 24, pp. 257-268[16] Cohen, M. A. and Lee, H. L., 1989, “Resource deployment analysis of global manufacturing and distribution networks”, Journal of manufacturing and operations management, Vol. 2, pp. 81-104[17] Convert, R. P. and Philip, G. C., 1973, “An EOQ model for items with Weibull distribution deterioration”, AIIE Transactions, Vol. 5, No. 4, pp. 323-326[18] Dave, U. and Patel, L. K., 1981, “(T, Si) policy inventory model for deteriorating items with time proportional demand”, Journal of the Operational Research Society, Vol. 32, pp. 633-670[19] Davis, R. A. and Gaither, N., 1985, “Optimal ordering policies under conditions of extended payment privileges”, Management Science, Vol. 31, No. 4, pp. 499-509[20] Ghare, P. M. and Schrader, G. F., 1963, “A model for an exponentially decaying inventory”, Journal of Industrial Engineering, Vol. 14, pp. 238-243.[21] Goyal, S. K., 1976, “An integrated inventory model for a single supplier-single customer problem”, International Journal of Production Research, Vol. 15, pp. 107-111[22] Goyal, S. K., 1985, “Economic order quantity under conditions of permissible delay in payments”, Journal of the Operational Research Society, Vol. 36, No. 4, pp. 335-338[23] Hadley, G., 1964, “A comparison of order quantities computed using the average annual cost and discounted cost”, Management Science, Vol. 10, pp. 472-476[24] Hadley, G., and Whitin, T. M., 1961, “An Optimal Final Inventory Model”, Management Science, Vol. 7, pp. 179-183[25] Haq, A. N., Vrat, P. and Kanda, A., 1991, “An integrated production -inventory-distribution model for manufacture of urea：a case”, International Journal of Production Economics, Vol. 39, pp. 39-49[26] Hark Hwang and Seong Whan Shinn, 1997, “Retailer’s pricing and lot sizing policy for exponentially deteriorating products under the condition of permissible delay in payments”, Computers and Operations Research, Vol. 24, No. 6, pp. 539-547[27] Hax, A. C. and Candea, D., 1984, Production and Inventory Management, Prentic-Hall, New Jersey, pp. 133-134[28] Heng, K. J., Labban, J. and Linn, R. J., 1991, “An order-level lot size inventory model for deteriorating items with finite replenishment rate”, Computers and Industrial Engineering, Vol. 20, No. 2, pp. 187-197[29] Jaggi, C. K. and Aggarwal, S. P., 1995, “Ordering policies of deteriorating items under permissible delay in payments”, Journal of the Operational Research Society, Vol. 46, pp. 658-662[30] Jammal, A. M. M., Sarker, B. R. and Wang, S., 1997, “An ordering policies for deteriorating items with allowable shortages and permissible delay in payment”, Journal of the Operational Research Society, Vol. 48, pp. 826-833[31] Kang, S. and Kim, I., 1983, “A study on the price and production level of the deteriorating inventory system”, International Journal of Production Research, Vol. 21, pp. 899-908[32] Kim, S. L. and Ha, D., 1997, “An integrated JIT inventory model for a buyer and a supplier”, Drexel University, Working Paper NO.94[33] Kingsman, B. G., 1983, “The effect of payment rules on ordering and stocking in purchasing”, Journal of the Operational Research Society, Vol. 34, No. 11, pp. 1085-1098[34] Larson, P. D., 1989, “An inventory model which assumes the problem away：a note Pan and Liao”, Production and Inventory Management Journal, Vol. 30, pp. 73-74[35] Lee, H. L. and C. Billingto, 1993, “Material Management in Decentralized Supply Chains”, Operations Research, Vol. 41, No. 5, pp. 835-947[36] Liao, H. C., Tsai, C. H. and Su, C. T., 2000, “An inventory model with deteriorating items under inflation when a delay in payment is permissible”, International Journal of Production Economics, Vol. 63, pp. 207-214[37] Mak, K. L., 1982, “A production lot size inventory model for deteriorating items”, Computers and Industrial Engineering, Vol. 6, No. 4, pp. 309-317[38] Mandal, B. N. and Phaujdar, S., 1989, “Some EOQ models under permissible delay in payments”, International Journal of Management Science, Vol. 5, No. 2, pp. 99-108 [39] Misra, R. B., 1975, “Optimum production lot size model for a system with deteriorating”, International Journal of Production Research, Vol. 15, pp. 495-505[40] Misra, R. B., 1979, “A note on optimal inventory management under inflation”, Naval Research Logistics Quarterly, Vol. 26, pp. 161-165[41] Nahmias, S., 1978, “Perishable inventory theory：a review”, Operations Research, Vol. 30, No. 4, pp. 680-708[42] Pan, A. C. and Liao, C., 1989, “An inventory model under just-in -time purchasing agreements”, Production and Inventory Management Journal, Vol. 30, pp. 49-52[43] P. C. Yang, 1998, “An inventory ordering policy for deteriorating items with multiple deliveries”, Industrial Engineering Department, Chung Yuan Christian University Chungli, Taiwan 32023, Republic of china.[44] Peter Chu, Kun-Jen Chung and Shaw-Ping Lan, 1998, “Economic order quantity of deteriorating items under permissible delay in payments”, Computers and Operations Research, Vol. 25, No. 10, pp. 817-824[45] Prasad, S., 1994, “Classification of inventory models and systems”, International Journal of Production Economics, Vol. 34, pp. 209-222[46] Raafat, F., 1991, “Survey of literature on continuously deteriorating, inventory models”, Journal of the Operational Research Society, Vol. 42, No. 1, pp. 27-37[47] Raafat, F., Wolfe, P. M. and Eldin, H. K., 1991, “An inventory model for deteriorating item”, Computers and Industrial Engineering, Vol. 20, No. 1, pp. 89-94.[48] Sarker, B. R. and Pan, H., 1994, “Effects of inflation and time value of money on order quantity and allowable shortage”, International Journal of Production Economics, Vol. 34, pp. 65-72[49] Sarker, B. R., Jammal, A. M. M. and Wang, S., 2000, “Supply chain models for perishable products under inflation and permissible delay in payment”, Computers and Operations Research, Vol. 27, pp. 59-75[50] Shah, V. R., Patel, N. C. and Shah, D. K., 1988, “Economic ordering quantity when delay in payments of order and shortages are permitted”, Gujarat Statistical Review, Vol. 15, No. 2, pp. 52-56[51]Silver, E. A., 1981, “Operations research in inventory management：a review and critique”, Operations Research, Vol. 29, No. 4, pp. 628-645[52] Tersine, R. J., 1994, Principles of Inventory and Materials Management, PTR prentice Hall, Englewood Cliffs, New Jersey, pp. 95[53] Trippi, R. R. and Lewin, D. E., 1974, “A present value formulation of the classical EOQ problem”, Decision Science 6, pp. 383-398[54] Wee, H. M., 1992, “Perishable commodities inventory policy with partial backordering”, Chung Yuan Journal, Vol. 12, pp. 191-198[55] Wee, H. M., 1995, “Optimal production policy for perishable items with partial backordering”, Engineering Optimization, Vol. 23, pp. 315-322[56] Zaid, T., Balkhi and Benkherouf, L., 1996, “On the optimal replenishment schedule for an inventory system with deteriorating items and time-varying demand and production rates”, Computers and Industrial Engineering, Vol. 30, No. 4, pp. 823-829