跳到主要內容

臺灣博碩士論文加值系統

(216.73.216.141) 您好!臺灣時間:2026/08/23 12:52
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:李哲興
研究生(外文):Lee, Je-Shin
論文名稱:利用遞迴TotalLeast-Squares演算法之AR模型適應性建立
論文名稱(外文):Adaptive AR Modeling Using Recursive Total Least-Squares Algorithm
指導教授:吳文榕
指導教授(外文):Wen-Rong Wu
學位類別:碩士
校院名稱:國立交通大學
系所名稱:電信工程研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:1998
畢業學年度:86
語文別:中文
論文頁數:1
中文關鍵詞:自回歸偏差解
外文關鍵詞:AR modelTLSbiasd solution
相關次數:
  • 被引用被引用:0
  • 點閱點閱:403
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
AR 模型在訊號處理上有廣泛的應用.當輸入訊號包含有高斯白雜訊時, 若
是直接利用RLS 或是 LMS 演算法, 將會得到有偏差的解. 在這篇論文,
我們利用 RTLS 演算法來解決這樣的問題, 並且提出兩種遞迴方法來估計
在 RTLS 演算法中的比重矩陣 D. 若是所求的 AR 模型為窄頻訊號, 則比
重矩陣 D 將近似於單位矩陣. 此時, 對於它的估計則可省略. 模擬的結
果顯示我們所提出的方法明顯地優於傳統的 RLS 演算法.
Autogressive(AR) modeling is widely used in signal processing.
When theinput data is corrupted by the white Gaussian noise, the
direct applicationof the RLS algorithm or LMS algorithm has been
shown to yield the biasedsolution. In this thesis, we use the
RTLS algorthm to solve the problem, andtwo recursive methods are
developed to estimate the weighting matrix D required in the
RTLS algorithm. If the AR process is narrow-banded, the
weighting matrix can be closed to the identical matrix. In this
case, theestimation of D is not required. The simulation results
have shown thatthe performance of the proposed method is
significantly superior to theconventional RLS algorithm.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top