1. 廖海瑞”半導體製程使用氣體的職業危害” 工業安全科技19952. 周崇光,2000年8月,“產業安全衛生應用技術發展計畫論文集” 經濟部工業局,1990年8月, P67-77.
3. 劉君毅,1999年12月,“矽甲烷(Silane)特性及風險預防措施” 工安科技季刊,第29期,工業安全技術服務團 P2-7
4. 李世偉 “旋風式集塵器內粒子飛行軌跡之研究” 交通大學 機械工程研究所 碩士論文 19965. “廢氣濕式處理”, 1995,工業污染防治手冊,經濟部工業局 P1~8.
6. “半導體製造業污染防治技術” ,1995,ISBN957-00-5392-5,經濟部工業局 P69-70
7. Yung, S. C., Calvert S., and Barbarika, H. F., “Venturi Scrubber Performance Model” Env. Sci. Tech. 1978 Vol.12, pp.456-458
8. 簡聰智 “去除次微米微粒之文 氏洗滌器理論分析”交通大學 環境工程研究所 碩士論文 20009. R.W.K.Allen “Prediction of Venturi scrubber grade efficiency curves using the contacting power law” , Powder Technology 1996 , 137-144
10. 鄭淵源 “濾材吸附有害氣體過程之數值計算” 交通大學 機械工程研究所 碩士論文 200011. Warren L. MaCabe and Julian Smith “Unit Operation of Chemical Enginering” 4th Edition McGraw-Hill Book Co.1985
12. A Buonicore & L.Theodore. “Air Pollution Control Equipment” , Springer-Verlag ,1994
13. S. Cavert et al. “Wet Scrubber System Study : VolⅠ, Scrubber Handbook“, PB 213-016, 1972
14. Rajamami Rajagopalan, Chi Tien, “Trajectory Analysis of Deep-Bed Filtration with the Sphere-in-cell Porous Media Model”,AIChE Journal, Vol.22,pp.523-533,1976
15. 陳石法 ”矩形空間中移動物體之動態流場與熱傳導特性研究” 交通大學 機械工程研究所 博士論文 200116. Rosin, P. and Rammler, E. “The laws coverning the fineness of powdered coal” The Institute of Fuel , Oct. 1933, pp.29-36
17. Hishida, K. Maeda,M. and Ikai,S. “ Study on Heat Transfer in a Binary Mist Flow ”Trans. of the Japan society of Mech.Eng., Vol. 47, no. 433, 1981 pp.1279-1286
18. L. Theodore & A.J.Buonicore “Air Pollution Control Equipment Vol.1 Particulates” 1988 CRC Press,Inc. pp105-107