跳到主要內容

臺灣博碩士論文加值系統

(216.73.216.191) 您好!臺灣時間:2026/11/19 05:07
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:莊見富
研究生(外文):Chien-Fu Chuang
論文名稱:偏光板廠空污設備能源節省實現
論文名稱(外文):Polarizer plant air pollution equipment to achieve energy savings
指導教授:胡家勝
指導教授(外文):Jia-Sheng Hu
口試委員:任才俊、姚武松
口試日期:2015-06-23
學位類別:碩士
校院名稱:國立臺南大學
系所名稱:綠色能源學科技學系碩士在職專班
學門:工程學門
學類:綜合工程學類
論文種類:學術論文
論文出版年:2015
畢業學年度:103
語文別:中文
論文頁數:44
中文關鍵詞:蓄熱材、熱回收、蓄熱焚化爐、觸媒焚化爐
外文關鍵詞:regenerative material、heat recovery.、Regenerative thermal oxidizer、Catalytic stoves
相關次數:
  • 被引用被引用:0
  • 點閱點閱:161
  • 評分評分:
  • 下載下載:16
  • 收藏至我的研究室書目清單書目收藏:0
本論文旨在探討偏光板廠之製程產生揮發性有機氣體的空污設備節能,蓄熱焚化爐利用蓄熱材保留燃燒的熱質,觸媒焚化爐則以熱交換器做為熱能保留的設計。將以觸媒焚化爐的天然氣使用作為比較基準,蓄熱焚化爐的天然氣消耗作為對照,本研究發現蓄熱焚化爐可以實現較佳的能源節省,降低能源費用的支出。本文除提到蓄熱焚化爐的蓄熱材設計,有熱回收的效益外,更可從尾氣的廢熱再利用、尾氣的廢氣濃縮再淨化、廢氣入口預熱等方式,去進行能源節省檢討,能源有限的今天,空污設備除了應有空污去除能力外,應有低消耗能源的特性,以期達到產業發展、保護環境,節省能源的三方互利的有利局面。
This paper aims to achieve polarizing the plant process produce air pollution volatile organic gas saving devices, regenerative heat storage material to retain the use of stoves burning thermal mass. Catalytic stove places as heat exchanger design reserved. Catalytic stove will be used as a benchmark natural gas, natural gas consumption of Regenerative thermal oxidizer as a control to compare the results of Regenerative thermal oxidizer achieve better energy savings. In addition to the heat storage material mentioned herein Design of Regenerative thermal oxidizer, heat recovery efficiency, but also can re-use the waste heat from the exhaust, exhaust gas is concentrated and then purified exhaust gas inlet preheat, etc., to carry out energy-saving review, limited energy today, in addition to air pollution equipment should be free dirt removal capability, the feature should be low consumption of energy in order to achieve industrial development, environmental protection, energy saving tripartite beneficial favorable situation.
摘要 i
Abstract ii
目錄 iii
表目錄 v
圖目錄 vi
符號與縮寫 vii
第一章 緒論 1
1-1研究背景與動機 1
1-2文獻回顧 3
1-3 研究目的 9
1-4 本文架構 10
第二章 控制架構 11
2-1控制方式介紹 11
2-2觸媒焚化爐 16
2-3蓄熱焚化爐 18
第三章 實驗方法 20
3-1實驗設備 20
3-2觸媒焚化爐運轉數據 22
3-3蓄熱焚化爐運轉數據 26
第四章 結果與討論 33
4-1觸媒焚化爐與蓄熱焚化爐的比較(一) 33
4-2觸媒焚化爐與蓄熱焚化爐的比較(二) 34
4-3觸媒焚化爐與蓄熱焚化爐的比較(三) 35
第五章 結論與未來展望 37
5-1 結論 37
5-2 未來展望 38
參考文獻 39
附錄一 40
附錄二 44

[1]欣南天然氣股份有限公司,http:// www.sinangas.com.tw
[2]財團法人資訊工業策進會,http:// www.iii.org.tw
[3]力特光電,http:// www.optimax.com.tw
[4]明基材料,http://www.benqmaterials.com
[5]行政院環境保護署,「半導體製造業空氣污染管制及排放標準」,民國 88 年發佈,民國91 年修正,2001。
[6]章裕民,「排放量規模及最佳可行控制技術介紹」,空污專責人員在職訓練教材,p4,2006。
[7]周明顯,「揮發性有機物及臭味控制技術」,環保資訊月刊,第 54 期,p5,2002。
[8]Anguil Environmental Systems,http://www. anguil.com
[9]Amelio, M. and Morrone, P., “Numerical Evaluation of the Energetic Performances ofStructured and Random Packed Beds in Regenerative Thermal Oxidizers”, AppliedThermal Engineering, Vol. 27, pp. 762-770 (2007).

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top