臺灣博碩士論文加值系統

供應商管理存貨是目前企業提昇供應鏈效率，降低長鞭效應的主要對策之一。製造業供應商所承受的問題，在於Hub庫存量資訊不易及時掌握，以及資訊整合的困難。本研究個案，導入整合Hub的供應商管理存貨系統，以解決上述問題，。
本論文的研究方法為實際在大型電子製造企業實作一個整合成品Hub的供應商管理存貨系統，此系統有兩大流程：(1) STO/SO模式–在site-self接獲訂單與生產製造；(2) PO/SO模式–site-self接獲訂單，other site生產製造。並採用RosettaNet電子商務標準，來達成系統主要的功能。
研究的結果顯示其效益計有作業方面的改善，包括時間、人力成本的節省，以及整體執行的提昇，企業對客戶的要求更迅速正確地反應、並提昇執行績效。

Vendor Management Inventory(VMI) is the key countermeasure to enhance the supply chain efficiency and reduce the Bullwhip effect. The problems encountered by the manufacturing suppliers are hard to capture the inventory information in Hub, and difficult to integrate related information. The case in this research implement the integrating Hub VMI system to solve the above problems.
This research method is to implement the integrating Hub VMI system in one electronic manufacturing enterprise. There are two system models: (1) STO/SO model – purchase order accepted by and manufactured in site-self; (2) PO/SO model - purchase order accepted by site-self, and manufactured in other self. Also implement RosettaNet standard to achieve the system main functions.
The results of this study includes the operation enhancements, the cost saving in time and man-power, and the total execution promotion, the prompt and correct response to the requirements of customers and enhance the performance efficiency.

中文摘要..........................................I
英文摘要..........................................I
目錄.............................................II
表目錄..........................................III
圖目錄.......................................... IV
第一章緒論........................................1
1.1 研究背景與動機................................1
1.2 研究目的與方法…..............................5
第二章文獻探討....................................7
2.1 供應鏈管理.................……...............7
2.2 存貨……….................……..............10
2.3 長鞭效應....................…….............13
2.4 供應商管理存貨.........…………………....... 20
第三章製造業成品庫存管理之設計…………………….. 25
3.1 製造業成品庫存管理之分析.................... 25
3.2 製造業成品庫存管理之設計目標................ 26
3.3 系統架構與系統流程設計.…………..............27
3.4 Business Messages設計…..................... 31
第四章製造業成品庫存管理之實作.................. 36
4.1 系統環境與系統平台.......................... 36
4.2 實作方式..………............................ 40
4.3 Hub實作優先順序.....................………… 42
4.4 使用者介面...........…...............……… 44
4.5 系統效益分析.........……….....….......... 47
第五章結論與未來研究方向......………............ 53
5.1 結論.........………......................... 53
5.2 未來方向............……..............……… 55
參考文獻...................................…....57

1. 賴士葆，“生產作業管理–理論與實務”，華泰書局，1991年。
2. 徐壽政, “長鞭效應之情境分析模式,” 國立交通大學工業工程與管理學系碩士班碩士論文, 1998.
3. 黎漢林, 許景華, “供應鏈管理與決策之講義,” 國立交通大學資訊管理學系Working Paper, 1999.
4. 林明德, “從供應鏈管理看製造業快速回應策略解決方案,”　製造業快速回應專案-解決方案錦囊資訊應用導航, 財團法人資訊工業策進會, 1998.
5. 許吉男, “合夥關係影響商業快速回應之實行與特色-以台灣零售業為例,” 私立元智大學管理研究所碩士論文, 1999.
6. 陳德舟, “備用件存貨管理政策之研究-以半導體設備業為例,” 國立交通大學工業工程與管理學系碩士班碩士論文, 1997.
7. 王裕文, “半導體設備供應商備用零件存貨導入VMI之研究,” 國立交通大學工業工程與管理學系碩士班碩士論文, 1998.
8. 祝堅志, “資訊網路應用對供應鏈管理影響之探討-以零售服務業為例,” 私立元智大學管理研究所碩士論文, 1998.
9. 李昌雄, 商業自動化與電子商務導論,1998
10. 翟志剛, “供應商管理庫存系統,” 商業快速回應(QR/ECR)技術手冊, 經濟部商業司編列,1998.
11. 朱侃如, “科技讓夕陽工業永不落日-益大製衣廠的第二春,” PC OFFICE, September, 1999, pp. 126-129.
12. 果芸, “供應鏈管理的現在與未來,” 資訊與電腦, August 1999, pp. 50-51.
13. 黃俊鴻,“設立客戶端專屬發貨倉庫之供應鏈模型效益分析,” 國立台灣科技大學管理研究所資訊管理學程碩士論文, 1999.
14. 商業快速回應(QR/ECR)技術手冊,” 經濟部商業司編列, 1998.
15. 李瓊英, “長鞭效應下,最佳存貨策略的決定與環境變數效果的探討” 國立台灣大學商學研究所碩士論文, 2000.
16. 顏得(吉吉), “供應鏈存貨管理模式之研究” 國立台北大學企業管理學研究所碩士論文, 2001.
17. Anonymous, “EDI, VMI meet the Internet Age,” Metal Center News, April 1999, pp. 21-23.
18. Lee, H.L., Padmanabhan, P. and Whang, S., “The Bullwhip Effect in a Supply Chains,” Sloan Management Review, Vol.38, Issue 3, Spring 1997b, pp. 93-102.
19. Matthers, R., “Quantifying the Bullwhip Effect in Supply Chains,” Journal of Operations Management, May 1997, pp. 89-100.
20. Strader, T. J., Lin, F.R. and Shaw, M. J., “The Impact of Information Sharing on Order Fulfillment Diverge,” Journal of Global Information and Management, Jan-Mar 1999, pp.16-25.
21. Ellram, L.M. and Hendrick, T.E., “Partnering Characteristic: A Dyadic Perspective,” Journal of Business Logistics, Vol. 16 1995, pp.41-63.
22. Buzzell, R.D. and Ortmeyer, G., “Channel Partnerships Streamline Distribution,” Sloan Management Review, Spring 1995, pp. 85-96.
23. Geoffrion, A.J., Powers, R.F., “Twenty years of Strategic Distribution System Design: An Evolutionary Perspective,” Vol 25, Interface, 1995, pp. 105-128.
24. Cavinato, J.L., “A Total Cost/Value Model for Supply Chain Competitiveness,” Journal of Business Logistics, 13(2), 1992, pp. 285-301.
25. Cohen, M. A. and Lee, H. L., “Strategic Analysis of Integrated Production – Distribution System: Models and methods,” Operation Research, Vol. 36, No. 2, 1988, pp. 216-228.
26. Cachon, G. and Fisher, M., “Campbell Soup’s Continuous Replenishment Program: Evaluation and Enhanced Inventory Decision Rules,” Production and Operations Management, Vol. 6, No. 3, 1997, pp.266-276.
27. Lee, H.L., Padmanabhan, P. and Whang, S., “Information Distortion in a Supply Chain: The Bullwhip Effect,” Management Science, Vol.43, No4, 1997a, pp. 546-570.
28. Holmstrom, J., “Implementing Vendor-Managed Inventory the Efficient Way: A Case Study of Partnership in the Supply Chain,” Production and Inventory Management Journal, Third Quarter, 1998, pp.1-5.
29. Matthew A. W., M. Eric, J., and Davis, T., “Vendor-Managed Inventory in the Retail Supply Chain,” Journal of Business Logistics, Vol. 20, 1999, pp. 183-195.
30. Cooke, J. A., “VMI: Very Mixed Impact?,” Logistics Management and Distribution Report, Dec 1998, pp. 51-53.
31. Hau L. Lee, V. Padmanabhan, and Seungjin Whang, "Information Distortion in a supply Chain: The Bullwhip Effect," Management Science, Vol.43, No.4, April 1997.
32. Frank Chen, Zvi Drezner, Jennifer K. Ryan and David Simchi-Levi, "The bullwhip effect: managerial insights on the impact of forecasting on variability in a supply chain"
33. Douglas M. Lambert and James R. Stock, "Strategic Logistics Management", Third Edition, 1993
34. Bowersox, D. J. and Closs, D. J., “Logistical Management – The Integrated Supply Chain Process,” McGraw-Hill, 1996.
35. Eillinger, A. E., Tayer J. C., and Daugherty P. J., “Automatic Replenishment Programs and Level of Involvement: Performance Implications,” International Journal of Logistics Management, Vol. 10, 1999, pp.25-36.
36. Nolan, K., “For Marmon/Keystone, VMI Offers Real Procurement Solution,” Metal Center News, Feb 1997, pp. 50-60.
37. Cottrill & Ken,“The Supply Chain of the Future,” Distributor, Vol. 96, No. 11, October 1997, pp. 52-55.
38. Betts, M., “Manage My Inventory Or Else,” Computer World, Vol. 28, No. 5, 1994, pp. 93-95.
39. Way, D. and Irastorza, J., “VMI Is for Fashion, Too,” Apparel Industry Magazine, Vol. 57, No. 3, 1996, pp. 16.
40. Yossi, A., “Planning Models for the Design of Capacitated Multi-Stage Production and Distribution Systems (Demand, Inventory, Vendor Managed Inventory),” Operation Research, DAI-B 59/06, 1998, pp.3034.
41. Benedit, C. and Margeridis, H., “Chain Reaction,” Charter, Mar 1999, pp. 46-49.
42. Baljko, J. L., “VMI: Supply Chain Savior or Curse,” Electronic Buyers, News, Manhasset, Aug 30, 1999a.
43. Bowersox, D. J. , “Logistics Paraerns of Logistical Organization,” Journal of Business Logistics , pp.65-80 , 1987.
44. Christopher, M. , “Logistics and Supply Chain Management,” Pitman Publishing , 1992.
45. Cooper, M. C. and Lisa M. E. , “Characteristics of Supply Chain Management and Implication for Purchasing and Logistics Strategy,” The International Journal of Logistics Management ,Vol.4 , p.16 , 1993.
46. Davis, R. A.、Markland, R. E. and Vickery, S. K. , “Operations Management,” 2nd , Ohio : South-Western College Publishing , 1998.
47. Fogarty, et al. , “Production and Inventory Management,” South-Western , 1991.
48. Kalakota, R. and Robinson, M. , “E-Business : Roadmap for Success,” Addison-Wesley Pub , 1999.
49. Kalakota, R. and Whinston, A. , “Frontiers of Electronic Commerce,” 1997.
50. Slack, et al. , “Operations Management,” Pitman Publishing , 1995.
51. Simchi-Levi, et al. , “Designing and Managing the Supply Chain,” the McGraw-Hill Companies , 2001.
52. Stevens, G. , “Integrating the Supply Chain” , International Journal of Physical Distribution and Materials Management, Vol.19 , pp.3 -8 ,1989.