臺灣博碩士論文加值系統

本論文主要目的是將非接觸型電能傳輸技術應用在切換式充電器上，其特點在於利用電磁耦合感應機構，對鉛酸電池進行充電之策略，係藉由輸出端電壓感應至輸入端之電流來控制。首先，在變壓器一次側最小輸入伏安容量之條件下，求得串並聯型非接觸電能傳輸系統工作頻率，然後探討在工作頻率時之交流輸出操作模式，並探討藉不同操作模式鉛酸電池之二段式定電流-定電壓充電之設計。最後，將所設計之非接觸型切換式充電器實際對24 V4.5 Ah之鉛酸電池進行充電，並藉由商用軟體Matlab和IsSpice進行模擬，與實測結果進行比較，以驗證所提理論之正確性。

The motive of this study is to apply noncontact electric energy transference technology to the switching mode chargers. The particularity of this tech is utilizing electro-magnetic coupling induce mechanism to charge the lead acid battery. By controlling the voltage of output side to determine the amount of current induced at the input side, which decides the charging speed. First, when inputting the minimum current at the primary of the transformer, one can get the operation frequency of noncontact electric energy transference system. Second, we analyze the operating modes of alternating current output at the working frequency. Third, several operating modes are selected to charge lead-acid battery by two-levels constant-current to constant-charge way. Finally, Charging a real 24.5V-4.5Ah lead-acid battery by the noncontact switching mode charger we designed, and simulating by commercial software, such as Matlab and IsSpice to compare with the experiment result to verify the theorem we derived.

摘要
英文摘要
誌謝
目錄
圖目錄
表目錄
參數索引
第一章、緒論
1-1 研究動機
1-2 文獻回顧
1-3 論文架構
第二章、非接觸型電能傳輸系統之工作原理
2-1 前言
2-2 非接觸型電能傳輸系統基本原理
2-3 串並聯型阻抗匹配電路參數之決定
2-4 六種操作模式下之交流輸出
第三章、非接觸型切換式充電器之設計與分析
3-1 前言
3-2 直流輸出之電路架構 41
3-3 非接觸型切換式充電器之設計準則
3-4 非接觸型切換式充電器之閉迴路控制
第四章、雛型系統實測與討論
4-1 前言
4-2 鉛酸電池重要特性簡介
4-3 實際設計及製作一非接觸型切換式充電器
第五章、總結
參考文獻
附錄

[1]Y. Jang, M. M. Jovanovic, “A new soft-switched contactless battery charger with robust local controllers,” IEICE/IEEE MTELEC'03, 2003, pp. 473-479.
[2]D. A. G. Pedder, A. D. Brown, and J. A. Skinner, “A contactless electrical energy transmission system,” IEEE Trans. Ind. Electron., vol. 46, 1999, pp. 23-30.
[3]K. W. Klontz, D. M. Divan, D. W. Novotny, and R. D. Lorenz, “Contactless power delivery system for mining applications,” IEEE Trans. Ind. Appl., vol. 31, no. 1, 1995, pp. 27-35.
[4]B. J. Heeres, D. W. Novotny, D. M. Divan, and R. D. Lorenz, “Contactless underwater power delivery,” Proc. IEEE PESC, 1994, pp. 418-423.
[5]Y. Jang and M. M. Jovanovic, “A contactless electrical energy transmission system for portable-telephone battery chargers,” IEEE Trans. Ind. Electron., vol. 50, no. 3, 2003, pp. 520-527.
[6]A. W. Green and J. T. Boys, “10 kHz inductively coupled power transfer-concept and control,” Proc. IEE PEVSD, 1994, pp. 694-699.
[7]A. Esser, “Contactless charging and communication for electricvehicles,” IEEE Ind. Appl. Mag., vol. 1, no. 6,1995, pp. 4-11.
[8]G. A. J. Elliott, J. T. Boys, and A. W. Green, “Magnetically coupled systems for power transfer to electric vehicles,” Proc. IEEE PEDS, vol. 2, 1995, pp. 797-801.
[9]H. Matsuki, M. Shiiki, K. Murakami, and T. Yamamoto, “Investigation of coil geometry for transcutaneous energy transmission for artificial heart,” IEEE Trans. Magn., vol. 28, no. 5, 1992,pp. 2406-2408.
[10]H. Matsuki, M. Shiiki, K. Murakami, and T. Yamamoto, “Investigation of coil geometry for transcutaneous energy transmission for artificial heart,” IEEE Trans. Magn., vol. 28, no. 5, 1992,pp. 2406-2408.
[11]Y. Jang, and M. M. Jovanovic, “A contactless electrical energy transmission system for portable-telephone battery chargers,” IEEE Trans. Ind. Electron., vol. 50, 2003, pp. 520-527.
[12]C. G. Kim, D. H. Seo, J. S. You, J. H. Park, and B. H. Cho, “Design of a contactless battery charger for cellular phone,” IEEE APEC’00, vol. 2, 2000, pp. 769-773.
[13]H. Sakamoto, and K. Harada, “A novel high power converter for non-contact charging with magnetic coupling,” IEEE Trans. Magn., vol. 30, 1994, pp. 4755-4757.
[14] P. Sergeant and A. Van den Bossche, “Inductive coupler for contactless power transmission,” IET Electron. Power Appl., vol. 2,no. 1, Jan. 2008,pp. 1-7.
[15]Y. S. Kong, E. S. Kim, I. G. Hwang and H. K. Lee, “High-efficiency series-parallel resonant converter for the non-contact power supply,” IEEE APEC’05, vol. 3, 2005, pp. 1496-1501.
[16]M. Ryu, H. Cha, Y. Park, and J. Baek, “Analysis of the contactless power transfer system using modelling and analysis of the contactless transformer,” IEEE IECON’05, 2005, pp. 1036-1042.
[17] Tso-Sheng Chan, and Chern-Lin Chen, “LLC resonant converter for wireless energy transmission system with PLL control,” in Proc.IEEE Sustainable Energy Technologies, Nov. 2008, pp.136-139.
[18] E. S. Kim, H. K. Lee, Y. S. Kong, and Y. H. Kim, “Operating characteristics in LCLC resonant converter with a low coupling transformer,” Proc. IEEE APEC, 2007, pp. 1651-1656.
[19]C. S. Wang, G. A. Covic, and O. H. Stielau, “Investigating an LCL load resonant inverter for inductive power transfer applications,” IEEE Transactions Power Electronics, vol. 19, 2004, pp. 995-1002.
[20]C. S. Wang, G. A. Covic, and O. H. Stielau, “Power transfer capability and bifurcation phenomena of loosely coupled inductive power transfer systems,” IEEE Trans. Ind. Electron., vol. 51, 2004, pp. 148-157.
[21]C. S. Wang, O. H. Stielau, and G. A. Covic, “Design considerations for a contactless electric vehicle battery charger,” IEEE Trans. Ind. Electron., vol. 52, 2005, pp. 1308-1314.
[22]沈煒智，「非接觸型切換式直流電源供應器之研發」，清華大學電機工程學系碩士論文，2006，台灣。
[23]謝振中，「電路學精譯」，超級，民國92年。
[24]蘇子翔，「非接觸型切換式充電器之研發」，大華技術學院機電工程研究所碩士論文，2007，台灣。
[25]孫清華，「最新可充電電池技術大全」，全華，民國92年。
[26]楊錢威，「智慧型居家清潔機器人之充電站研製」，成功大學工程科學系碩士論文，2005，台灣。
[27]鄭培璿，「高頻快速充電電路策略之研究」，台灣大學電機工程學研究所博士論文，2004，台灣。
[28]曾裕傑，「鉛蓄電池充電特性與檢測之研究」，中原大學電機工程學系碩士論文，2001，台灣。