中文部份:
[1]大谷杉郎、大谷朝南 共著，賴耿陽 譯著，“碳纖維材料入門”， 復漢出版社，1986年。
[2]吳俊宏，“緻密化參數對碳/碳複合材料性質影響之探討”，義守大學碩士論文，2008年。[3]李世偉，“以液相Boehmite滲入法製作碳纖維/陶瓷基磨擦材料製程及性質研究”，義守大學碩士論文，2002年。[4]柯澤豪，“碳-碳複合材料之現況與未來”，強化塑膠廣用新知季刊，1995年，pp.28-43。[5]馬振基、張文吉，“超高溫高強度複合材料-碳/碳複合材料”， 塑膠工業專輯，化工技術，第二卷，第十期，1994年，pp.72-77。[6]張佐光，“功能複合材料”，曉園出版社，pp.212-214。
[7]許明發，“碳/碳纖維/碳-碳複合材料之加工技術及應用”，滄海書局，1997年。
[8]許明發、郭文雄，“熱塑複合材料”，國興圖書，2004年。
[9]郭華軒，“碳化速率對碳/碳複合材料機械及磨潤性質影響之研究”，國立成功博士碩士論文，2004年。[10]陳長有、許振聲、陳伯宜，“機械材料試驗-磨耗試驗”，全華圖書， 2001年，pp. 165-172。
[11]陳啟煌、姜智埕，“熱塑性預浸材-含浸技術”，Technology技術專欄，pp.81-85。
[12]稻垣道夫、大谷杉郎、大谷朝南，“碳材料碳纖維工學-碳纖維篇”，復漢出版社，1994年，pp.22-26。
[13]蔡明潔，“以液相滲入法製作不同碳基材碳/碳複合材料製程及性質研究”，義守大學碩士論文，2005年。英文部份:
[1]ASTM C1341-06 2009年版。
[2]ASTM C20-92 1994年版。
[3]ASTM D695-96 1994年版。
[4]ASTM E18-07 1994年版。
[5]B.K. Yen and T. Ishiharai, “Influence of environment and temperature on “dusting ”wear transitions of Carbon/Carbon composite”, Journal of Materials Science, vol.32, 1997, pp.681-686.
[6]B.K. Yen and T. Ishiharai, “Investigation of friction and wear mechanisms of Carbon/Carbon composites in nitrogen and air at elevated temperatures”, Carbon, vol.34, no.4, 1996, pp.489-498.
[7]C. Blanco, J. Bermejo, H. Marsh and R. Menendez, “Chemical and physical properties of carbon as related to brake performance”, Wear, vol.213, no.1-2, 1997, pp.1-12.
[8]C. R. Thomas, “Essentials of Carbon-Carbon Composites”, Royal Society of Chemistry, Keytec Typesetting, 1993, pp.23,96,97.
[9]C. Y. Niu Michael, “Composite airframe structure”, 1992, pp.62-65.
[10]C.C. Li and J.E. Sheehan, “Friction and Wear Study of Graphite and C-C Composite in Air and Helium”, Wear of materials, 1981, pp.525-533.
[11]C.P Ju, J.H. Chern Lin, …etc., ”Multi-braking tribological behavior of PAN-pitch,PAN-CVI and pitch-resin-CVI carbon-carbon composites”, Materials Chemistry and Physics vol.64, 2000, pp.196-214.
[12]C.P. Ju, K.J. Lee, H.D. Wu and C.I. Chen, “Low-energy wear behavior of polyacrylonitrile, fiber-reinforced, pitch-matrix, Carbon/Carbon composites”, Carbon, vol.32, no.5, 1994, pp.971-977.
[13]C.P. Ju, K.J. Lee, H.D. Wu and C.I. Chen, “Low-energy wear behavior of polyacrylonitrile, fiber-reinforced, pitch-matrix, Carbon/Carbon composites”, Carbon, vol.32, no.5, 1994, pp. 971-977.
[14]Chen J.D. and Ju C.P., “Effect of sliding speed on tribological behavior of a PAN-pitch Carbon/Carbon composite”, Materials Chemistry and Physics, vol.39, 1995, pp.174-179.
[15]Chen Tengfei, Gong Weiping,...etc., “Effects of fiber-types on braking behavior of carbon-carbon composites”, Materials Science and Engineering vol.A441, 2006, pp.73-78.
[16]D. William and Jr Callister, “Fundamentals Of Materials Secience And Engineering”, Fifth Edition, 2001, ch.15
[17]D.F. Moore, “Principles and application of tribology”, Pergamon, Oxford, 1975, pp.1-388.
[18]E.Fitzer and L.M. Manocha, “Carbon reinforcement and Carbon/Carbon Composites”, Springer, Berlin, 1998.
[19]E.M. Tatarzycki, “Friction Characteristics of Some Grapgites and Carbon Composites Sliding Against Themselves”, Extended Abstracts and Program-13th Biennial Conference on Carbon, 1977, pp.138-139.
[20]EL. M. Asloun, J.B. Dount…etc, “On the estimation of the tensile strength of carbon fibers at short lengths”, Materials Science, vol.24, 1989, pp.3504-3510.
[21]Erich Fitzer, “The future of Carbon/Carbon composites”, Carbon, vol.25, no.2, 1987, pp.163-190.
[22]G.Savage, “Carbon-Carbon Composites”, Chapman＆Hall, 1993, p.40.
[23]http://simaaldrich.com/catalog/search/productdetail/aldrich/357
[24]http://www.csrc.com.tw/c-frame2.htm
[25]http://www.torayca.com/index2.html
[26]J. B. Barr and I. C. Lewis, “Chemical changes during the mild air oxidation of pitch”, Carbon, vol.16, no.6, 1978, pp.439-444.
[27]J. W. Weeton, D. M. Peters and K. L. Thomas, “Intoduction to composite materials in Engineers Guide to Composite Materials”, Section 1, American Society for Metals, Ohio, 1987, pp.1-16.
[28]J.D. Buckley and D.D. Edie, in “Carbon-Carbon Materials and Composites”, Noyes, 1993, pp.1-281.
[29]J.D. Buckley, “Carbon-Carbon, An Overview”, Ceramic Buletin, 1988, pp.364-368.
[30]J.D. Chen and C.P. Ju, “Friction and wear of PAN/pitch-, PAN/CVI- and Pitch/resin/CVI- based Carbon/Carbon composites”, Wear, vol.174, no.1-2, 1994, pp.129-135.
[31]J.D. Chen, J.H.Chern Lin and C.P. Ju, “Effect of humidity on the tribological behavior of Carbon/Carbon composites”, Wear, vol.193, 1996, pp.38-47.
[32]J.K. Lancaster, “Transitions in the Friction and Wear of Carbons and Graphites Sliding Against Themselves”, ASLE Transactions, 1975, pp.187-201.
[33]Jiang Xiaoyu and Gao Qing, “Stress-transfer analysis for fibre/matrix interfaces in short-fibred composites”,Composites Science and Techology, vol.61, 2001, pp.1359-1366.
[34]K. A. Trick and T. E. Saliba, “Mechanisms of the Pyrosis of Phenolic Resin in a Carbon/Phenolic Composite”, Carbon, vol.33, no.11, 1995, pp.1509-1515.
[35]K. J. Lee, J. H. Chern Lin and C. P. Ju, “Simulated-stop tribological behavior of pitch-resin-CVI Carbon/Carbon composite” , Materials Chemistry and Physics, vol.49, no.3, 1997, pp.217-224.
[36]K. Ouchi and H. Honda, Fuel, vol.38, 1959, p.429.
[37]K. Ouchi, “Infra-Red Study of Structural Changes During the Pyrolysis of a Phenol-Formaldehyde Resin ”, Carbon, vol.4, 1966, pp.59-66.
[38]K.H. Zum Gahr, ”Microstructure and Wear of Materials”, Elsevier, Amsterdam, 1987, pp.351-495.
[39]Kuo-Jung Lee, Huy-Zu Cheng and Jean-Shing Chen, “Effect of densification cycles on continuous friction behavior of Carbon/Carbon composites ”, Wear, vol.260, no.1-2, 2006, pp.99-108.
[40]M. Klucakova, “Rheological Properties of Phenolic Resin as a Liquid Matrix Precursor for Impregnation of Carbon-Carbon Composites with Respect to Conditions of The Densification Process”, Composites Science and Technology vol.64, 2004, pp.1041-1047.
[41]M.C. Waterbury and L.T Drzal, ”On the determine of fiber strengths by in situ fiber strength testing”, Journal of Composites Technology Research, vol.13, 1991, p.22.
[42]Morgan Peter, “Carbon Fibers and their Composites”, Taylor & Francis, 2005.
[43]N.P. Suh, “Tribophysics”, Prentice-Hall, New Jersey, 1986, pp.1-25.
[44]Ozcan Soydan and Filip Peter, ”Microstructure and wear mechanisms in C/C composites”, Wear, vol.259, 2005, pp.642-650.
[45]P . Dupel, R. Pailler and F . Langlais, “Pulse chemical vapour deposition and infiltration of pyrocarbon in model pores with rectangular cross-sections”, Journal of Materials Science, vol.29, no.5, 1994, pp.1341-1347.
[46]P. J. F. Harris, “Fullerene-related Structure of Commercial Glassy Carbons”, Philosophical Magazine, vol.84, no.29, 2004, pp.3159-3167.
[47]R.L.K. Matsumoto and G.D. Forsythe, “Reduced wear carbon brake material”, US Patent , 2002.
[48]S. Awasthi and JL. Wood, “Carbon/Carbon composite materials for aircraft-brakes”, Process Ceramics Engineering Science, 1988.
[49]S. Kimura, E. Yasuda and N. Narita. JSLE Interior Edition 5, 1984, pp.11-16.
[50]T.H. Ko and T.S. Ma, “Effect of Post-Curing on the Mechanical Properties of Carbonized Phenolic Resins”, Polymer Composites vol.19, no.4, 1998.
[51]Vernom John著，蔡西杰 譯著，“Introduction to engineering materials, 3rd ed.（工程材料基礎篇）”，俊傑書局股份有限公司， pp.243-245, 240-241。
[52]W.V Kotlensky, “ Mechanical properties of CVD carbon infiltrated carbon and graphite filament wound cylinders”, Chemisty and Physics of Carbon , vol.10, 1972, p.334.
[53]Xiong Xiang and Li Jiang-hong,…etc, ”Impact of brake pressure on the friction and wear of carbon/carbon Composites”, Carbon, vol.45, 2007, pp.2692-2716.
[54]Z. Eliezer and V.D. Khanna, “On the Effect of Fiber Orientation on the Wear of Composites Materials”, Wear vol.53, 1979, pp.387-389.