Cover
TABLE OF CONTENTS
LIST OF TABLES
LIST OF FIGURES
ABSTRACT
CHAPTERS
Ⅰ. INTRODUCTION
References
Ⅱ. LITERATURE REVIEW OF LOW TEMPERATURE COFIRED CERAMIC PACKAGING
2.1 Introduction
2.2 Material Systems
2.2.1 Glass-Ceramic Materials
2.2.2 Glass-Ceramic Materials
2.3 Low Temperature Cofired Technology
2.3.1 Tape Casting
2.3.2 Blanking
2.3.3 Via Punching
2.3.4 Via Filling and Screen Printing
2.3.5 Lamination
2.3.6 Firing
2.4 Differential Sintering of Composites - Cofiring
2.4.1 Particulate Composites
2.4.2 Layered Composites
2.4.3 Confiring Defects
References
Ⅲ. CRYSTALLIZTION KINETICS AND MECHANISM OF LOW TEMPERATURE COFIRED GLASS
3.1 Introduction
3.2 Experimental Procedure
3.3 Results and Discussion
3.3.1 Identification of Crystallin Phases
3.3.2 Devitrification Kinetics and Mechanism
3.3.2.1 Nucleation
3.3.2.2 Transformation Kinetics
3.3.2.3 Crystal Growth
3.3.2.4 DTA Results
3.3.3 Crystallization Effect on Material Properties
3.4 Summary
References
Ⅳ. CAMBER DEVELOPMENT DURING COFIRING AG-BASED LOW-DIELECTRIC-CONSTANT CERAMIC PACKAGE
4.1 Introduction
4.2 Experimental Procedure
4.3 Results
4.3.1 Shrinkage Behaviors of Ag Film and LTCC Tape
4.3.2 Camber Development
4.4 Discussion
4.4.1 Theoretical analyses
4.4.1.1 Elastic Model
4.4.1.2 Viscous Model
4.4.2 Experimental vs. Theoretical Results
4.4.2.1 Elastic Model
4.4.2.2 Viscous Model
4.5 Summary
References
Ⅴ. EFFECTS OF AG PASTE FORMULATION ON CAMBER DEVELOPMENT DURING COFIRING OF AN AG-BASED LTCC
5.1 Introduction
5.2 Experimental Procedure
5.3 Results and Discussion
5.3.1 Effect of Crystallization on Sintering Kinetics of LTCC TAPE and Ag Pastes
5.3.1.1 LTCC Tape
5.3.1.2 Ag Pastes
5.3.2 Camber Development-Experimental vs. Calculated Results
5.4 Summary
References
Ⅵ. COFIRING KINETICS AND MECHANISMS OF AN AG-BASED GLASS+CERAMICS ELECTRONIC PACKAGE
6.1 Introduction
6.2 Experimental Procedure
6.3 Results and Discussion
6.3.1 Densification Kinetics and Mechanism of Ag Film and CFG Tape
6.3.2 Camber Development
6.4 Summary
References
Ⅶ. EFFECT OF DENSIFICATION RATE MISMATCH ON CAMBER DEVELOPMENT DURING COFIRING OF NICKEL-BASED MULTILAYER CERAMIC CAPACITORS
7.1 Introduction
7.2 Experimental Procedure
7.3 Results
7.3.1 Sintering Atmosphere
7.3.2 Sintering of Ni Electrode and BaTiO3 Dielectric Films
7.3.3 Camber Development
7.4 Discussion
7.4.1 Elastic Model
7.4.2 Viscous Model
7.5 Summary
Rerferences
Ⅷ. CONCLUSIONS
Ⅸ. FUTURE DIRECTIONS
APPENDIX A THE INTERFACIAL REACTION BETWEEN AG METALLIZATION AND LTCC SUBSTRATE
BIOGRAPHICAL LIST
Others
|