臺灣博碩士論文加值系統

本論文發展了一套可以有彈性、有效率計算發光元件發光效率的方法。本方法
以有限時域差分法為主輔以傅式分析得到目標頻率的強度, 再將各個位置、各
個角度的能量加總得到進入空氣的總出光率。
發光二極體及有機發光二極體可能成為顯示及照明的主要元件之一, 然而發光
二極體和有機發光二極體都有發光效率低落的問題。有鑒於此, 本篇論文將焦
點放在發光二極體及有機發光二極體的模擬。我們採用的提高發光效率的方式
為在發光二極體及有機發光二極體中加入光子晶體。在參數範圍內進行掃描以
取得最佳情形的最佳出光率和出光率與各個參數間的關係, 以進一步了解各種
參數的影響及設計考量。
我門定義未加入光子晶體的結構為原始結構。先以最常見的方形結構來計算。
另外, 三角形結構、半圓形結構以及圓形結構也列入考慮。最後我們可以得到
在發光二極體中, 方形結構相對於原始結構可以得到三倍的出光率提升為最佳。
而在有機發光二極體中, 方形加平板的結構相對於原始結構可以得到三成的出
光率提升為最佳。

In this thesis, a flexible and efficient method to calculate light extraction
efficiency of light-emitting device is developed. This method is primarily
based on finite-difference time-domain ( FDTD) method aided with
Fourier analysis to obtain the intensity of the target frequency. Energy
through all angles or positions is summed up to evaluate total extraction
efficiency.
LEDs ( light emitting diodes) and OLEDs ( organic light emitting diodes)
might become one of the primary components in displays and lighting.
However, both suffer low light extraction efficiency. Considering this issue,
this thesis focuses on LED and OLED simulation. Photonic crystal
is applied to LED and OLED for light extraction efficiency improvement.
Numerous parameters are scanned within parameter bounds to evaluate
the best case and the relationship between light extraction efficiency and
each individual parameter, enabling us to understand effects of various
parameters and design considerations.
We define structure without photonic crystals an ”original structure.”
The thesis starts with ordinary rectangular structure. Furthermore, triangular,
semi-circle and circle structures are also taken into consideration.
Finally, simulation results indicate that rectangular structure in LED offers an optimal improvement at three times of the light extraction
efficiency compared with original structure, while rectangular structure
combined with flat plate in OLED offers an optimal improvement
of thirty percent in light extraction efficiency compared with original
structure.

1 簡介17
1.1 發光二極體簡介. . . . . . . . . . . . . . . . . . . . . . . 17
1.2 有機發光二極體簡介. . . . . . . . . . . . . . . . . . . . . 18
1.3 提升發光效率的理論基礎. . . . . . . . . . . . . . . . . . . 20
2 數值方法23
2.1 有限時域差分法. . . . . . . . . . . . . . . . . . . . . . . 23
2.2 金屬材料的計算. . . . . . . . . . . . . . . . . . . . . . . 29
2.3 吸收邊界條件. . . . . . . . . . . . . . . . . . . . . . . . . 32
2.4 傅式轉換. . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.5 遠場近似. . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2.6 玻璃到空氣的穿透量計算. . . . . . . . . . . . . . . . . . . 35
3 二維數值模擬與結果36
3.1 LED模擬結構與結構參數介紹. . . . . . . . . . . . . . . . 36
3.2 OLED模擬結構與結構參數介紹. . . . . . . . . . . . . . . 36
3.3 LED模擬結果與討論. . . . . . . . . . . . . . . . . . . . . 43
3.4 OLED模擬結果與討論. . . . . . . . . . . . . . . . . . . . 56
4 有機發光二極體改良結構78
4.1 增加平板結構. . . . . . . . . . . . . . . . . . . . . . . . . 78
4.2 有機發光二極體平板結構與光子晶體結構結合. . . . . . . . 84
4.3 模擬結果與討論. . . . . . . . . . . . . . . . . . . . . . . 84
4.4 綜合討論. . . . . . . . . . . . . . . . . . . . . . . . . . . 107
5 結論115
參考文獻116

參考文獻
[1] K. S. Yee, “Numerical solution of initial boundary value problems
involving Maxwell’s equations in isotropic media,” IEEE Trans. Antennas
Propagat., vol. 14, pp. 302-307, 1966.
[2] J. P. B´erenger, “A perfect matched layer for the absorption of electromagnetic
waves,” J. Comput. Phys., vol. 114, pp. 185-200, 1994.
[3] S. A. Cummer, “A simple, nearly perfectly matched layer for general
electromagnetic media,” IEEE Microwave Wireless Lett., vol. 13, pp.
128-130, 2003.
[4] J. P. B´erenger, “On the reflection from Cummer’s nearly perfectly
matched layer,” IEEE Microwave Wireless Lett., vol. 14, pp. 334-
336, 2004.
[5] Y. J. Lee, S. H. Kim, J. Huh, G. H. Kim, Y. H. Lee, S. H. Cho, Y.
C. Kim, and Y. R. Do, “A high-extraction-efficiency nanopatterned organic light-emitting diode,” Appl. Phys. Lett., vol. 82, pp. 3779-
3781 , 2003.
[6] Y. R. Do, Y. C. Kim, Y. W. Song, and Y. H. Lee, “Enhanced light
extraction efficiency from organic light emitting diodes by insertion
of a two-dimensional photonic crystal structure,” J. Appl. Phys., vol.
96, pp. 7629-7636, 2004.
[7] Y. J. Lee, S. H. Kim, G. H. Kim, Y. H. Lee, S. H. Cho, Y. W. Song,
Y. C. Kim, and Y. R. Do, “Far-field radiation of photonic crystal
organic light-emitting diode,” Opt. Express., vol. 13, pp. 5864-5870 ,
2005.
[8] M.-H Lu,C.F. Madigan,and J.C. Sturm, “Improved external coupling
efficiency in organic light-emitting devices on high-index substrates,”
J.Tech.Dig.Int.Elec.Dev.Mtg., pp. 607-610, 2000.
[9] C. L. Lin, T. Y. Cho, C. H. Chang, and C. C. Wu,“Enhancing light
outcoupling of organic light-emitting devices by locating emitters
around the second antinode of the reflective metal electrode,” Appl.
Phys. Lett., Vol. 88, No. 8, 081114 , 2006.
[10] C. L. Lin, H. W. Lin, C. C. Wu, “Examining microcavity organic
light-emitting devices having two metal mirrors,” Appl. Phys. Lett., Vol. 87, 021101, 2005.
[11] V. Bulovi´c, V. B. Khalfin, G. Gu, and P. E. Burrows, “Weak microcavity
effects in organic light-emitting devices,” Phys. Rev. B, vol.58,
No. 7, pp. 3730-3740, 1998.
[12] A. Taflove and S. C. Hagness, Computational Electrodynamics: The
Finite-Difference Time-Domain Method, 2nd ed., Boston, Artech
House, 2000.
[13] S. M¨oller and S. R. Forrest, “Improved light out-coupling in organic
light emitting diodes employing ordered microlens arrays,” J. Appl.
Phys., vol. 91, pp. 3324-3327, 2002.
[14] 陳金鑫, 黃孝文著,OLED: 有機電激發光材料與元件, 初版, 五南圖書出
版有限公司, 臺北市, 2005.
[15] 史光國著,半導體發光二極體與固態照明, 初版, 全華科技圖書股份有限公
司, 臺北市, 2005.
[16] M. H. Lu and J. C. Sturm, “Optimization of external coupling and
light emission in organic light-emitting devices: modeling and experiment,”
J. Appl. Phys., vol. 91, No. 2, pp. 595-604, 2002.
[17] B. J. Matterson, J. M. Lupton, A. F. Safonov, M. G. Salt, W.
L. Barnes, and I. D. W. Samuel, “Increased efficiency and controlled
light output from a microstructured light-emitting diode,”
Adv. Mater., vol. 13, No. 2, pp. 123-127, 2001.
[18] P. A. Hobson, S. Wedge, J. A. E. Wasey, I. Sage, and W. L.
Barnes, “Surface plasmon mediated emission from organic lightemitting
diodes,” Adv. Mater., vol. 14, No. 19, pp. 1393-1396, 2002.
[19] D. K. Gifford and D. G. Hall, “Emission through one of two metal
electrodes of an organic light-emitting diode via surface-plasmon
cross coupling,” J. Appl. Phys., vol. 81, No. 23, pp. 4315-4317, 2002.
[20] J. M. Ziebarth, A. K. Saafir, S. Fan, and M. D. McGehee, “Extracting
light from polymer light-emitting diodes using stamped bragg
gratings,” Adv. Funct. Mater., vol. 14, No. 5, pp. 451-456, 2004.
[21] S. Wedge, J. A. E. Wasey, and W. L. Barnes, and I. Sage, “Coupled
surface plasmon-polariton mediated photoluminescence from a topemitting
organic light-emitting structure,” Appl. Phys. Lett., vol. 85,
No. 2, pp. 182-184, 2004.
[22] K. Meerholz, and D. C. M¨uller, “Outsmarting waveguide losses in
thin-film light-emitting diodes,” Adv. Funct. Mater., vol. 11, No. 4, pp. 251-253, 2002.
[23] T. Tsutsui, M. Yahiro, H. Yokogawa, K. Kawano, and M. Yokoyama,
“Doubling coupling-out efficiency in organic light-emitting devices
using a thin silica aerogel layer,” Adv. Mater., vol. 13, No. 15, pp.
1149-1152, 2001.
[24] G. Gu, D. Z. Garbuzov, P. E. Burrows, S. Venkatesh, S. R. Forrest,
and M. E. Thompson, “High-external-quantum-efficiency organic
light-emitting devices,” OSA, vol. 22, No. 6, pp. 396-398, 1997.
[25] H. J. Peng, Y. L. Ho, X. J. Yu, and H. S. Kwok, “Enhanced coupling
of light from organic light emitting diodes using nanoporous films,”
J. Appl. Phys., vol. 91, No. 3, pp. 1649-1654, 2004.
[26] S. G. Garcia, B. G. Olmedo, and R. G. Martin, “A time domain
near-to-far field transformation for fdtd in two dimensions ,” Microwave
and Opt. Tech. Lett., vol. 27, No. 6, pp. 427-432, 2000.
[27] M. Fujita, K. Ishihara, T. Ueno, T. Asano, S. Noda, H. Ohata, T.
Tsuji, H. Nakada, and N. Shimoji, “Optical and electrical characteristics
of organic light-emitting diodes with two-dimensional photonic
crystals in organic/electrode layers,” Jap. J. Appl. Phys., vol. 44, No.
6A, pp. 3669-3677, 2005.
[28] A. Chutinan, K. Ishihara, T. Asano, M. Fujita, S. Noda, “Theoretical
analysis on light-extraction efficiency of organic light-emitting
diodes using FDTD and mode-expansion methods,” J. Orgel., vol.
91, pp. 3-9, 2004.
[29] Hermann A. Haus, Waves and Fields in Optoelectronics, 1st ed. ,
Prentice-Hall, New Jersey, 1985.
[30] J. D. Joannopoulos, R. D. Meade, and J. N. Winn,Photonic Crystals:
Modeling the Flow of Light, 1st ed. , Princeton University Press,
1995.