跳到主要內容

臺灣博碩士論文加值系統

(216.73.217.68) 您好!臺灣時間:2026/11/21 09:11
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:葉丁瑋
研究生(外文):Ting-Wei Yeh
論文名稱:光學鍍膜在藍綠光發光二極體上的應用
論文名稱(外文):The Application of Optical Coatings to Blue/Green Light Emitting Diodes
指導教授:紀國鐘紀國鐘引用關係
指導教授(外文):G. C. Chi
學位類別:碩士
校院名稱:國立中央大學
系所名稱:光電科學研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2001
畢業學年度:89
語文別:英文
論文頁數:79
中文關鍵詞:發光二極體、抗反射層、高反射層
外文關鍵詞:light emitting diode、antireflective layer、high reflective layer、light extraction
相關次數:
  • 被引用被引用:2
  • 點閱點閱:409
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
在本論文中,我們利用光學鍍膜的方式來改善藍光發光二極體的發光強度,又分成在發光二極體的正面及背面兩方面作討論,在元件正面是以蒸鍍的方式鍍上一層抗反射層,而在背面是鍍上反射鏡,以達到我們增加發光二極體發光強度的目的。
在發光二極體的正面,由於氮化鎵的折射率(約2.4)和空氣的折射率(1)差異相差很大,所以光經過折射率差異大的介質時,光穿透的比例將會減少,因此我們用二氧化矽、氮化矽、三氧化二鋁等材料作保護及抗氧化,並根據理論上薄膜干涉的計算及模擬,找出建設性干涉的膜厚,以提昇發光二極體的發光強度,並對沒有鍍抗反射層的發光二極體作光強度上的比較。
在發光二極體的背面,為了避免有光從元件的背面耗損,因此鍍上金、銀、鋁作背面金屬反射鏡,以及用二氧化矽及二氧化鈦折射率的差異,鍍成多層膜的高反射鏡(經理論計算反射率可高達99%以上),並對鍍上金屬膜、多層膜的高反射鏡及一般製程的發光二極體作光強度及輸出功率的比較。

In this dissertation, we try to improve light extraction of blue/green light emitting diodes (LEDs) by means of optical coatings. For the purpose of extracting light inside LEDs, we focus on two topics, topside of LEDs with antireflective layers and bottom side of LEDs with reflectors.
On topside of LEDs, the difference of refractive index between GaN (about 2.4) and air (1) is large, so the percentage of transmission is lowered. SiO2, Al2O3, SiNX is coated on the topside of InxGa1-xN/GaN LEDs as passivation and/or antireflective layer. According to the theory of interference, it can be suggest that the thickness of thin film with constructive interference will achieve the purpose of improving emissive intensity. And the intensity of LEDs coated with passivation and/or antireflective layer compared with that of non-coated LEDs will be discussed.
For the purpose of preventing optical absorption at interface between the backside of LED and lead frame, the bottom side of substrate is coated with Au, Ag, Al, respectively, as metal reflectors. In addition, periodic stacked multiple layers of TiO2 and SiO2 are used as high reflector (above 99% form theoretical calculation) due to the large difference of refractive index between them. The comparison of luminous intensity (output power) between LEDs coated with metal or dielectric reflectors and non-coated LEDs will be discussed in this article.

Contents
Abstract (in Chinese) i
Abstract (in English) iii
Acknowledgement v
Contents I
Figures Captions III
Table Captions VII
Chapter 1. Introduction
1.1 The Background of blue/green GaN LED 1
1.2 Overview of this Dissertation 3
Chapter 2. Theoretical Calculation and Simulation
2.1 Introduction 4
2.2 Theoretical Calculation 8
2.2.1 Theory of Multilayer Films 8
2.2.2 Antireflective Films 11
2.2.3 High-Reflectance Films 12
2.3 Simulation 15
Chapter 3. Experimental Procedure
3.1 LED Fabrication 19
3.1.1 Equipment 19
3.1.2 Epitaxy 23
3.1.3 LED Process 24
3.2 Antireflective Coatings Applied to Blue LED Devices 25
3.3 High Reflective Coatings Applied to Blue LED Devices 27
Chapter 4. Results and Discussion
4.1 Measurement of Reflectance and Transmittance 29
4.1.1 Transmittance of Antireflective layers 29
4.1.2 Reflectance of High Reflective Layers 30
4.2 Comparison of Output Intensity of Coated and Non-coated LED Devices 32
4.2.1 Antireflective Layers Coated LEDs 32
4.2.2 High Reflective Layers Coated LEDs 34
Chapter 5. Conclusions and Future Work
5.1Conclusion 40
5.2 Future Work 41
Reference 42

Reference
1. Grant R. Fowles, “Introduction to Modern Optices”, second edition, p.96-100.
2. Pochi Yeh, “Optical Waves in Layered Media”, p.106-108.
3. Stan Gage, Dave Evans, Mark Hodapp, Hans Sorensen, Richard Jamison, Bob Krause, ”Ptoelectronics/ Fiber-Optices Applications Manual”, p.2.1-2.3.
4. Hadis Morkoç, “Nitride Semiconductors and Devices”.
5. G. M. Laws, E. C. Larkins, Harrison, C. Molloy, D. Somerford, “Improved refractive index formulas for the AlxGa1-xN and InyGa1-yN alloys” J. Appl. Phys. 89, 1108-1115(2001)
6. J. K. Sheu, Y. K. Su, G. C. Chi, M. J. Jou, C. M. Chang and C. C. Liu, “High t ransparency Ni/Au ohmic contacts to p-type GaN”, Appl. Phys. Lett. Vol.74 (1999)
7. “薄膜光學與鍍膜技術”,李正中 編著, 藝軒圖書出版社, 1999年12 月, 第一版, p.135-136.
8. T. Someya and Y. Arakawa,”Highly reflective GaN/Al0.34Ga0.66N quarter-wave reflectors grown by metal organic chemical vapor deposition”, Appl. Phys. Lett. 73, 3653-3655(1998)
9. H. M. Ng, T. D. Moustakas, S. N. G. Chu, ”High reflectivity and broad bandwidth Al/GaN distributed Bragg reflectors grown by molecular-beam epitaxy”, Appl. Phys. Lett. 76, 2818-2820(2000)
10. Shuji Nakamura and Shigefusa F. Chichibu, “Introduction to Nitride Semiconductor Blue Lasers and Light Emitting Diodes”.
11. R. J. Shul, G. B. McClellan, S. A. Casalnuovo, D. J. Rieger, S. J. Pearton, C. Constantine, C. Barratt, R. F. Karlicek, Jr., C. Tarn, and M. Schurman,” Inductively coupled plasma etching of GaN”, Appl. Phys. Lett. Vol.69, 1119 (1996)
12. J. K. Sheu, Y. K. Su, G. C. Chi, M. J. Jou, C. C. Liu, C. M. Chang, and W. C. Hung, “Inductively coupled plasma etching of GaN using Cl2/Ar and Cl2/N2 gases”, J. Appl. Phys. Vol.85, 1970 (1999)
13. M. E. Lin, Z. Ma, Y. F. Huang, Z. F. Fan, L. H. Allen, and H. Morkoc, ”Low-resistance ohmic contacts on wide band-gap GaN”, Appl. Phys. Lett. Vol.64, 1003 (1994)
14. Z. F. Fan, S. N. Mmohammad, W. Kim, O. Aktas, A. E. Botchkarev, and H. Morkoc, “Very low resistance multilayer ohmic contact to n-type GaN”, Appl. Phys. Lett. Vol.68, 1672 (1996)
15. C. B. Vartuli, J. D. Mackenzie, J. W. Lee, C. R. Abernathy, S. J. Pearton, and R. J. Shul, ”Cl2/Ar and CH4/H2/Ar dry etching of III-V nitrides”, J. Appl. Phys. Vol.80, 3705 (1996)
16. R. J. Shul, G. B. McClellan, S. J. Pearton, C. R. Abernathy, C. Constantine, and C. Barrat, “Comparison of dry etch techniques for GaN”, Electron Lett. Vol.32, 1408 (1996)
17. S. A. Smith, C. A. Wolden, M. D. Bbremser, A. D. Hanser, R. F. Davis, and W. V. Lampert, “High rate and selective etching of GaN, AlGaN, and AlN using an inductively coupled plasma”, Appl. Phys. Lett. Vol.71, 3631 (1997)
18.許進恭, “以有機金屬氣相磊晶法成長氮化物半導體及藍色發光二極體”, 國立成功大學博士論文, 中華民國八十八年五月.
19. T. Peng and J. Piprek, Electrn. Lett.32, 2285 (1996)
20. M. M. Y. Leung, A. B. Djurisic, and E. H. Li, “Refractive index of InGaN/GaN quantum well”, J. Appl. Phys. Vol.84,6312 (1998)
21. M. D. McCluskey, L. T. Romano, B. S. Krusor, and D. P. Bour, “Phase separation in InGaN/GaN multiple quantum wells”, Appl. Phys. Lett. Vol.72, 1730 (1998)
22. D.Doppalapudi, S. N. Basu, K.F. Ludwig, Jr., and T. D. Moustakas, “Phase separation and ordering in InGaN alloys grown by molecular beam epitaxy”, J. Appl. Phys. Vol.84, 1389 (1998)
23. D. Brunner, H. Angerer, E. Bustarret, F. Freudenburg, R. Höpler, R. Dimitrov. O. Ambacher, and M. Stutzman, “Optical constants of epitaxial AlGaN films and their temperature dependence”, J. Appl. Phys. Vol.82, 5090 (1997)

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top