[1]Jehnming Lin, 1992, “Estimation of Cutting Temperature in High Speed Machining”, Journal of Engineering Materials and Technology, vol.114, pp. 289~296.
[2]Jehnming Lin, 1993, “Inverse Estimation of the Tool-Work Interface Temperature in End Milling”, Int. J. Tools Manufact, vol.35, pp.751~760.
[3]D. A. Stephenso and A. Ali, 1992, “Tool Temperature in Interrupted Metal Cutting”, Journal of Engineering for Industry, Vol.114, pp. 127~136.
[4]K. K. Wang, S. M. Wu and K. Iwata, 1968, “Temperature Responses and Experimental Error for Multitootth Milling Cutter”, Journal of Engineering for Industry, vol.90, pp.353~359.
[5]E. G. Ng, D. K. Aspinwall, D. Brazil and J. Monaghan, 1999, “Modeling of temperature and forces when orthogonally machining hardened steel”, Int. J. Machine Tools & Manufacture, Vol.39, pp.885-903.
[6]F. W. Taylor, 1907, “On the art of cutting metals”, Journal of Engineering for Industry, ASME, 28, pp. 31-350.
[7]Carl J. Salomon, 1931, “Process for the Machining of Metals or Similar Acting Materials When being Worked by Cutting Tools”, German patent No.523594.
[8]E. G. Herbert, 1926, “Proc. Instn mech”, Enger 1, 289.
[9]Mingyang Wu, Meijuan Liu and Guangyu Tan, 2007, “Groove Reconstruction Technique of Three-Dimensional Complex Groove Insert Based on Temperature Field”, Journal of Northeast Forestry University, vol.35, no.10, pp.60~70.
[10]Qiang Liu, Guang-yu Tan, Yu-jing Sun and Shun-long Sun, 2005, “Temperature Field Prediction for 3D Complex Slot Typed Milling Insert Based on Artificial Neural Network”, Journal of Machine Design, vol.23, no.2, pp.33~36.
[11]Cheng-Hung Huang, Li-Chun Jan, Rui Li and Albert J. Shih, 2007, “A three-dimensional inverse problem in estimating the applied heat flux of a titanium drilling – Theoretical and experimental studies”, Journal of Heat and Mass Transfer, vol.50, pp.3265~3277.
[12]林派臣，1997，高速端銑削Ti-6Al-4V鈦合金，國立台灣大學機械工程研究所，碩士論文。[13]陳盈志，1998，端銑加工之切削溫度預測，國立成功大學機械研究所，碩士論文。[14]吳佩霖，2000，在工件溫度限制下最大材料移除率之銑削條件探討，國立成功大學機械工程研究所，碩士論文。[15]鄭彥良，1995，三維熱彈塑性切削模式研究，國立台灣大學機械工程研究所，碩士論文。[16]鄭彥良，1995，高速切削研究與應用，國立台灣大學機械工程研究所，碩士論文。
[17]Shaw原著，林維新、紀松水編譯，切削理論，全華出版社。
[18]李阿卻編著，1992，切削刀具學，全華科技圖書。
[19]Eurachem/CITAC Guide, 2000, Quantifying Uncertainty in Analytical Measurement, 2nded.
[20]房性中，2001，量測作業之不確定度分析與探討，中華技術雜誌。
[21]Louis C. Burmeister, 1982, Convective Heat Transfer, Wiley.
[22]張仲卿等人 譯，1997，熱傳遞，高立，台北。
[23]萬淑美等人 譯，2003，實用統計學，新文京，台北。
[24]李鈞澤編著，1992，切削刀具學，文京圖書。
[25]程嘉垕編著，1983，機工工作法，徐氏基金會。
[26]洪良德編著，1992，切削刀具學，全華科技圖書。
[27]Sasahara, H., T. Obidawa and T. Shirakashi, “FEM Analysis on Three Dimensional Cutting – Analysis on Large Deformation Problem of Tool Entry,” JSPE, Vol. 59.
[28]K. Maekawa and M. Maeda, 2005, “Simulation Analysis of Three-Dimensional Chip Formation Processes -FEM Formulation and a Few Results,” JSPE, Vol. 59, NO. 11, pp. 1827~1832 .
[29]L. Michalski, et al., 2000, “Temperature measurement”, 2nded, Wiley, New York.
[30]M. Necati Ozisik., 1993, Heat Conduction, 2nded, John Wiley&Sons， Inc.