臺灣博碩士論文加值系統

人類是以雙腳行走的生物，每一天的作息都與我們的雙腳息息相關，也扮演著身體平衡協調的重要角色。當人體因為長期姿勢不良而造成重心偏移，若不接受矯正治療則會產生各種骨骼方面的病痛及不正常的體態。但若要進行矯正，傳統製做矯正鞋墊的方式太過於耗費耗時，利用電腦輔助客制化矯正鞋墊也考量成本，因此如何有效平均分佈足部壓力且降低成本是本研究重點之一。
因此當足部壓力出現不平衡時，就等於人體的地基歪了一樣，長期將會影響到膝蓋、骨盤，肩膀及脊椎產生歪斜，從骨骼結構的改變而影響到臟器的功能。足部保養就像是汽車長期在路上行駛，輪胎磨耗的情形會偏向某一方，通常每隔一段時間就要去保養廠做定位，來延長輪胎的壽命 。
本團隊過去所開發之電腦輔助客制化鞋墊的過程，須經過足壓分析，再電腦輔助製作鞋墊，製作時程較長，無法量產，每當使用者足部壓力改變後，需重新設計新的客制化鞋墊，無形增加成本與時效。因此本研究將簡化客製化矯正足弓鞋墊之流程並配合鞋內部的微調整技術，使之更快速、有效的調整足壓分布與平衡。使得足部保健的過程中能夠簡單方便，省時省力和加強足弓鞋墊的功效。

Human is two-legged mammal. Therefore, leg is important in our daily activity because it helps to balance human body. So, when the center of gravity is offset due to incorrect posture, it will cause the uneven body structure and thus affect joint problem if without any proper orthodontic treatment for a period. Thus, human needs to be re-aligned.
Arch is the foundation of body structure. When the arch is in poor structure or in uneven balance, it will affect the structure of knee, pelvis, shoulder and thus human spine. It will affect the circulation and the function of each organ if without any proper orthodontic treatment for a period. The condition is the similar as the proper alignment of car tires which need to carry load every day. Therefore, car tires are needed to align and keep balance in order to extend the life.
The process of traditional way and computer aided design for the customized insole are too costly and time consuming. Therefore, the main of this study is to simplify the process of customized insole to re-distribute foot plantar pressure with the standard arch and the technique of shoe alignments.

中文摘要 i
英文摘要 ii
誌 謝 iv
目錄 v
表目錄 vii
圖目錄 viii
符 號 表 說 明 xi
一、 緒論 1
1-1 研究背景 1
1-2 研究動機 2
1-3 研究目的 3
1-4 論文架構 3
二、 文獻探討 9
2-1 足部構造 9
2-2 足弓構造 9
2-3 探討足印參數 10
2-4 足底壓力 10
2-5 足底分區 11
2-6足底壓力量測系統 12
2-7 本團隊過去研究結果 16
三、 研究架構及方法 36
3-1 足部壓力量測系統以及推導 36
3-2量測儀器與量測方法 39
3-3 標準型足弓鞋墊的設計 40
3-4 重新分佈腳底壓力實體操作過程 40
四、 重新分佈腳底壓力之成果評估 55
4-1 轉印式足底壓力量測系統 55
4-2 影像分析系統 55
4-3標準型足弓鞋墊 56
4-4 重新分佈腳底壓力之效果評估 56
五、 結論 81
未來展望 82
參考文獻 83
附錄一 87
附錄二 88

[1]C. J. Sneyers, R. Lysens, H. Feys and R. Andries, “Influence of malalignment of feet on the plantar pressure pattern in running,” Foot Ankle Int, Vol. 16, pp. 624-32, 1995.
[2]李幸華，“鞋墊對減低足底壓力效益之生物力學分析”，碩士論文，國立陽明醫學院醫學工程研究所，1994。
[3]D. S. Fick, J. P. Albright & B. P. Murray (1992). Relieving painful skim splints. The Physician and Sports Medicine, pp. 105-113, 2012
[4]香港足脊檢查中心網頁，http://www.footspine.com/Home.aspx
[5]劉華昌，基本骨科學，合記圖書，1991。
[6]起康物理治療中心網頁，http://www.wppc.hk/physio_topic_flatfeet.htm。
[7]A. Simkin, I. Leichter, M. Giladi, S. Michael and C. Milgrom, “Combined effect of foot arch structure and orthotic device,” Foot and Ankle, Vol. 10, pp. 25-29, 1989.
[8]L. Schwanz, Britten, R. Ti. , and Thompson, L.R. (1928) Studies in physical development and posture. U.S. Public Health Bulletin, 179. Washington, Dc, U.S. Government Printing Office.
[9]P. R. Cavanagh and M. M. Rodgers, “The arch index: a useful measure from footprints ” Journal of Biomech, Vol. 20, pp. 511-547, 1987.
[10]楊坤明， 鞋墊材質與足弓支撐高度對不同足型影響之研究，大同工學院工業設計研究所碩士論文， 1997。
[11]W. C. Chu, S. H. Lee, W. Chu, T. J. Wang, M. C. Lee, “The Use of Arch A Digital Index to Characterize Arch Height: Image Processing Approach,”.IEEE Transactions on Biomedical Engineering, Vol. 42, pp. 1088-1093, 1995.
[12]W. P. Chen, C. W. Ju and F. T. Tang, “Effects of total contact insoles on the plantar stress redistribution: a finite element analysis,” Elsevier Science Ltd, Vol. 18, pp. S17-S24, 2003.
[13]K. Nakajima, W Kakihana, T Nakagawa, H Mitomi, A Hikita, R Suzuki, M Akai, T Iwaya, K Nakamura, N Fukui, “Addition of an arch support improves the biomechanical effect of a laterally wedged insole,” Gait & Posture, Vol. 29, pp. 208–213, 2009.
[14]E. J. Luger, M. Nissan, A. Karpf, E. L. Steinberg and S. Dekel, “Patterns of weight distribution under the metatarsal heads,” J Bone Joint Surg [Br], Vol. 81-B, pp. 199-202, 1999.
[15]林師誠 ，”正常足部之三維動態有限元素分析”，中原大學，醫學工程學所，碩士論文，1998。
[16]S. Goskea, A. Erdemir, M. Petre, S. Budhabhatti and P. R. Cavanagh, “Reduction of plantar heel pressures: Insole design using finite element analysis,” Journal of Biomechanics, Vol. 39, pp. 2363-2370, 2005.
[17]C. T. Chuang, R. H. Hwang, M. Y. Lee and B. J. Hwang, “Design of in-shoe plantar measuring system,” J. Technol, Vol. 14, pp. 359–364, 1999.
[18]S. L. James, B. T. Bates and L. R. Osternig, “Injuries to runners,” Am J Sports Med, Vol. 6, pp. 40-50, 1987.
[19]M. Giladi, C. Milgrom, M. Stein, H. Kashtan, J. Margulies, R. Chisin, R. Steinberg and Z. Aharonson, “The low arch, a protective factor in stress fractures,” Orthop Rev, Vol. 14, pp. 709-712, 1985.
[20]A. Simkin, I. Leichter, M. Giladi, M. Stein and C. Milgram, “Combined effect of foot arch structure and an orthotic device on stress fractures,” Foot Ankle, Vol. 10, pp. 25-29, 1989.
[21]G. H. Lee, S. J. Han, S. G. Lee and S. B. Park, “The effect of metatarsal pad for foot pressure,” J. Korean Acad, Vol. 28(1), pp. 94–97, 2004.
[22]D. Lemmon, T. Y. Shiang, A. Hashmi, J. S. Ulbrecht and P. R. Cavanagh, “The Effect of Insoles in Therapeutic footwear a Finite Element Approach,” Eleservier Science Ltd, Vol. 13, pp. 185-192, 2003.
[23]M. H. Jahss and F. Kummer, “Investigations into the fat pads of the sole of the foot: heel pressure studies,” Foot Ankle, Vol. 13, pp. 227–232, 1992.
[24]A. Bataller, E. Alcantara, J.C. Gonzalez and A.C. Garcia, “Influence of anatomical elements in the foot pressure distribution,” Proc.of the 5ff Symp. on Footwear Biomechanics, pp. 56-59, 2001.
[25]A. J. Boulton, C. I. Franks, R. P. Betts, T. Duckworth and J. D. Ward, “Reduction of abnormal foot pressure in diabetic neuropathy using a new polymer insole material,” Diabetes Care, Vol. 7, pp. 42–46, 1984.
[26]吳心慈，”內側足弓墊於扁平足病例站立平衡之效應”，國立陽明大學，醫學工程研究所，碩士論文， 2003。
[27]林信良，”正常足弓與扁平足弓在不同步速下行走對足底壓力影響的探討”，國立體育學院，運動科學研究所，碩士論文，1992。
[28]林淇鉉，”兒童的足弓影像及平衡功能之探討”，國立成功大學，醫學工程研究所碩博士班，碩士論文，2004。
[29]陳文基.，”扁平足弓和正常足弓走與跑之生物力學研究”，國立體育學院，運動科學研究所，碩士論文，2003。
[30]林桓正.，”矯正鞋墊對高低足弓運動員傷害及表現的影響”，國立體育學院，教練研究所，碩士論文，1999。
[31]L. I. Gardner, J. E. Dziados, B. H. Jones, J.F. Brundage, J. M. Harris, R. Sullivan and P. Gill, “Prevention of Lower Extremity Stress Fractures:A Controlled Trial of a Shock Absorbent Insole,” AJPH, Vol. 78, pp. 1563-1567, 1988.
[32]G. F. Kogler, S. E. Solomonidis and J. P. Paul, “In vitro method for quantifying the effectiveness of the longitudinal arch support mechanism of a foot orthosis,” Clinical Biomechanics, Vol. 10, pp. 245-252, 1995.
[33]S. A. Bus, J. S. Ulbrecht and P. R. Cavanagh, “Pressure relief and load redistribution by custom-made insoles in diabetic patients with neuropathy and foot deformity,” Clinical Biomechanics, Vol. 19, pp.629–638, 2004.
[34]C. C. Chang, M. Y. Lee and C. H. Chang, “Adaptive Multi-airbag Foot Pressure Redistribution Insole Design using Image-based Rapid Pressure Measuring System” , IEEE, Vol. 3, pp2909-2914, 2000.
[35]A. Raspovic, L. Newcombe, J. Lloyd and E.Dalton, “Effect of customized insoles on vertical plantar pressures in sites of previous neuropathic ulceration in the diabetic foot,” Harcourt Publishers Ltd, Vol. 10, pp. 133-138, 2000.
[36]N.A. Guldemond, P. Leffers, N.C. Schaper, A.P. Sanders, F. Nieman, P. Willems, G.H.I.M. Walenkamp, “The effects of insole configurations on forefoot plantar pressure and walking convenience in diabetic patients with neuropathic feet,” Clinical Biomechanics, Vol. 22, pp. 81–87, 2007.
[37]G. F. Kogler, S. E. Solomonidis and J. P. Paul, “Biomechanics of longitudinal arch support mechanisms in foot orthoses and their effect on plantar aponeurosis train,” Clin. Biomech, Vol. 11(5), pp. 243–252, 1996.
[38]Morlock, M. & Nigg, B. M. “ Theoretical considerations and practical results on the influence of the repoesenatation of the foot for the estimation of internal forces with models”, Journal of Clinical Biomechanics, Vol 6, pp. 3-12, 1991.
[39]詹益坤，李淑貞，楊世偉，趙令怡，林佳貞，張惠芳，”正常青年人之足底壓力分析”，中華物療誌，Vol. 22，pp. 81-90，1997。
[40]羅明哲,”足底壓力測試片之開發與其應用之研究,”國立陽明大學復健科技輔具研究所碩士論文, 2005。
[41]王志元,”以個人數位助理為基礎之腳底壓力量測系統設計,”中原大學醫學工程學系碩士學位論文,2002。
[42]Novel electronics inc. http://www.novel.de/，2006.
[43]Steadlands International Marketing Ltd. http://www.steadlands.com/fsr.htm， 2001.
[44]Tekscan, Inc. http://www.tekscan.com， 2006.
[45]C. C. Chang, M. Y. Lee and C. N. Huang, “Computer-Aided Design and Manufacturing of Customized Insoles” , IEEE, Vol. 11, pp74-79, 2011.
[46]王智寰，”數位影像腳形、腳壓量測系統之開發”，國立台南大學系統工程所，碩士論文，2007。
[47]周大龠鹿，”客製化鞋墊之電腦輔助設計製造系統開發”，國立台南大學系統工程所，碩士論文，2009。
[48]蔡慶霖，“客製化鞋墊之電腦輔助設計製造系統開發”，國立台南大學系統工程所，碩士論文，2010。
[49]莊子瑩，“足弓對換之自然矯正鞋墊設計與評估”，國立台南大學系統工程所，碩士論文，2012。