臺灣博碩士論文加值系統

同步輻射研究中心(SRRC)擁有第三代同步輻射儲存環設施，專用於產生同步輻射光(synchrotron radiation)並且有效運用許多插入元件磁鐵(insertion device magnets)，可以有效地增加同步輻射光的強度與改變輻射光的偏極性。儲存環的磁格是由三個轉彎消能散磁格(triple bend achromat lattice, TBA磁格)所組成，可使電子的發散度更小，磁格磁鐵包含二、四與六極磁鐵等組合。為提高輻射光的品質並減少電子束的擾動，磁格磁鐵與插入元件磁鐵其磁場的品質就顯得很重要。為了解磁格磁鐵與插入元件磁鐵的磁場特性與修正磁鐵的磁場，所以需有一高準確度與精密度的磁場量測系統。
是故我們想建立一簡易而快速的自動量測系統－拉緊式導線系統(stretched wire system)，此量測系統相較過去一些傳統的磁場量測方式，如霍耳探針(hall probe)、翻轉線圈(flipping coil)及旋轉線圈(rotating coil)而言，可以減少量測時間，也可提高磁場量測的準確度。對於量測磁格磁鐵如二極、四極和六極磁鐵其多極諧和項(multipole field harmonic terms)和插入元件磁鐵的一次場積分(first field integral)與二次場積分(second field integral)的方法，具有較高的選擇彈性。而量測磁格磁鐵的多極諧和項及插入元件磁鐵的一次場積分與二次場積分的分佈情形，可研究分析磁鐵的缺陷(defect)並修正有缺陷的磁場。

SRRC is a third generation light source storage, which accommodate many insertion device magnets to produce the high intensity photon flux and varying polarization light of synchrotron radiation. The SRRC magnet lattice is a triple bend achromat that can minimize the electron emittance. The lattice magnet includes dipole, quadrupole and sextrupole magnets. In order to improve the synchrotron radiation quality and decrease electron perturbation. The qualities of lattice magnet and insertion device magnets are very important. Therefor we need a high precision and accuracy measurement system to understand magnet characteristics of lattice and insertion device magnets and to correct and shim the defect magnets.
Herein, we want to set up a simple and high-speed automatic measurement system with stretched wire method. This method compare to traditional measurement methods, such as hall probe, flipping coil and rotating coil, it can reduce time consummation on the field measurement. The measurement results of harmonic field strength of lattice magnets and the first and second field integral strength of insertion device magnets that can analysis magnet defects and correct them.

中文摘要i
英文摘要ii
誌謝iii
目錄iv
表目錄vi
圖目錄vii
第一章 緒論1
1.1 研究動機與目的1
1.2 論文內容概述2
第二章 同步輻射加速器簡介4
2.1 同步輻射光的產生機制4
2.2 同步加速器的磁鐵結構5
2.2.1磁格磁鐵5
2.2.1.1 二極磁鐵8
2.2.1.2 四極磁鐵9
2.2.1.3 六極磁鐵10
2.2.2插入元件磁鐵11
2.2.2.1 增頻磁鐵11
2.2.2.2 聚頻磁鐵11
第三章 拉緊式線圈量測原理13
3.1 一次場積分13
3.2 二次場積分14
3.3 多極諧和項 (Multipole harmonic terms)17
第四章 量測系統裝置與量測流程19
4.1 量測儀器裝置19
4.2 量測流程20
4.2.1 一次場積分20
4.2.1.1 的似動態量測21
4.2.1.2 的靜態量測21
4.2.2 二次場積分23
4.2.3 多極諧和項25
第五章 拉緊式線圈量測系統精確度26
5.1系統誤差26
5.2隨機誤差29
第六章 磁鐵的量測結果30
第七章 結論32
參考文獻33
附錄A 線圈下垂位移估算A-1

[1] Yong-Chul Chae and Glenn Decker, "Advance Photon Source Insertion Device Field Quality and Multipole Error Specification", IEEE, 3409-3411 (1996).
[2] Dino Zangrando, Richard P. Walker, "A stretched wire system for accurate integrated magnetic field measurements in insertion devices", Nucl. Instrum. Meth. in Physics A376, 275-282 (1996).
[3] C.S. Hwang, et al., "A long loop coil system for insertion device magnet measurement", The first Asia Particle Accelerator Conference (APAC'94), KEK, Japan, 24-27 March, (1998).
[4] W.C. Elmore and M.W. Garrett, "Measurement of Two-Dimensional Field. Part I", Rev. Sci. Instrum. Vol. 25, No. 5, 480-485 (1954).
[5] F. Bonaudi, et al., "CERN Accelerator School Magnetic Measurement and Alignment" Edit by S. Turner, Geneve (1992).
[6] 行政院同步輻射研究中心籌建處，同步輻射簡介，行政院同步輻射研究中心，台北，民國78年。
[7] Helmut Wiedemann, "Particle Accelerator Physics-Basic principles and linear beam dynamics", Springer-Verlag, Berlin Heidelberg, New York (1993).
[8] Richard P. Feyman, Robert B. Leighton, Matthew Sands, "The Feynman lectures on physics", Addsion-Wesley (1989).
[9] 黃榮浩，「加速器磁鐵之磁場量測系統研究」，國立台灣大學，碩士論文，民國74年。
[10] C.S. Hwang, et al., "Feature of the Magnetic Field of a Rectangular Combined Function Bending Magnet", IEEE Trans. magn., Vol. 32, No. 4, 3032 (1996).
[11] 黃清鄉，「利用幾種不同的量測與分析方法來研究同步加速器磁鐵的磁場特性」，國立交通大學，博士論文，民國86年。
[12] C.H. Chang, et al., "Design and Performance of the SRRC Quadrupole Magnets", IEEE Trans. mang., Vol. 30, No. 4, 2241 (1994).
[13] C.H. Chang, et al., "Design, Construction and Measurement of the SRRC Sextrupole Magnets", IEEE Trans. magn., Vol. 30, No. 4, 2245 (1994).
[14] 黃清鄉，「同步輻射插入元件磁鐵之研發概況」，科學發展月刊，第27卷第5期，493~503頁，88年5月。
[15] S. Sudou, et al., "Measurements and calculations of gravitational and electrostatic wire sags for a 4.6 meters long drift chamber", Nucl. Instrum. Meth. in Physics A383, 391-398 (1996).
[16] R.H. Milburn, "Electro-mechanics of drift tube wires", Nucl. Instrum. Meth. in Physics A394, 415-419 (1997).