臺灣博碩士論文加值系統

目前市售手機用充電器多為插電式充電器，體積小，但若出國，
其各國電壓、頻率及插座有各式各樣，其配件很多，很不方便；而太
陽能是不用電費又方便的能源，因此本論文利用太陽能做為能源，設
計以太陽能為電力之手機充電器。
本內容大致分為如下，太陽能電池介紹、充電方法的種類與用途、
升壓電路介紹、電路設計。
本文研究乃利用太陽能電池的特性，製作出一個以太陽能為輸入
電源的太陽能光電系統。

Most cell phone chargers in Taiwan are inserting chargers. However,
the voltage, frequency, and socket are different in foreign countries. They
have many accessories, and this makes them inconvenient to use.
Nevertheless, solar power is a free-charge and easy accessible energy.
Therefore, the thesis of this research is to design a cell phone charger that
uses solar power to function.
The content of this research can be categorized into four divisions:
introduction to solar cell, various forms of charging and their applications,
introducing the boost-up circuit, and the circuit design.
This research is devoted to create a solar power system that relies on
sunlight energy input by using the characteristics of solar cell.

中文摘要 ---------------------------------------------- i
英文摘要 ---------------------------------------------- ii
誌謝 -------------------------------------------------- iii目錄 -------------------------------------------------- iv
表目錄 ------------------------------------------------ vi
圖目錄 ------------------------------------------------ vii
符號說明 ---------------------------------------------- x
第一章、研究動機與目的 -------------------------------- 1
第二章、充電方法的種類與用途 -------------------------- 4
第三章、太陽能電池的介紹 ------------------------------ 19
第四章、電路之介紹與設計 ------------------------------ 30
第五章、結論與未來展望 -------------------------------- 64
參考文獻 ---------------------------------------------- 65

[1] Ren-E Yu, 1990, Science of Battery-from Biotic Battery to Solar Cell,Fuwen Bookstore, Tainan.
[2] Yong-Dong Chang, 2003, Design and Implementation of Resonant Converters for Battery Chargers, Department of Electrical Engineering Kun Shan University of Technology Tainan, Taiwan,R.O.C., Thesis for Master of Science.
[3] Hao-Che Lee, 2002, ReflexTM Charging Technique for Lead-Acid Battery Chargers, Department of Electrical Engineering Kun Shan University of Technology Tainan, Taiwan, R.O.C., Thesis for Master of Science.
[4] Pei-Hsuan Cheng,2004, Research on High Frequency Fast Charging Circuit Strategy, Department of Electrical Engineering, National Taiwan University, Taipei, Taiwan, Thesis for Doctor of Science.
[5] Chia-Chin Chuang, 2005, Engineer of solar power- solar cell, Chwa.com, Taipei.
[6] Guo-Kiang Hung, 2002, A Grid Connected Residential Photovoltaic Inverter, Department of Electrical Engineering, National Taiwan University, Taipei, Taiwan, Thesis for Doctor of Science.
[7] Soul-Chin Chen, 2003, Solar energy and development wind power generation multiplexed system, Department of Electrical Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, Thesis for Master of Science.
[8] Hide-Yu Yang, 1976, Electro-chemical cell, The Chinese Institute of Electrical Engineering, Taipei.
[10] Chien-Wei Yang, 2005, Design and Implementation of The Charging Station for Intelligent House Cleaning Robot, Department of Engineering Science, National Cheng Kung University, Thesis for Master of Science.
[11] Shi-An Liang, 2004 ,Theory and Designer of ommutative Power Supply, chwa.com., Taipei.
[12] Yu-Shiung Wang, 2003, Electronic Source mplementation of UAV by Using Solar Power Energy System, Department of Aeronautics and Astronautics, National Cheng Kung University, Thesis for Master of Science.
[13] Y. Xi, P. Jain, Y. Liu and R. Orr, 1999,"A zero voltage switching and self-reset forward converter topology”, IEEE APEC, Vol.2, pp.827~833.
[14] H. Chunh, S. Y. R. Hui and W. H. Wang, 1998, “An isolated ZVS/ZCS flyback converter using the leakage inductance of the coupled inductor”, IEEE Trans. on Industrial Electronics, Vol.45,pp679~682.
[15] R. Watson, F. C. Lee, and G. C. Hua, 1996, “Utilization of an active-clamp circuit to achieve soft switching in fly back converters”, IEEE Trans. On Power Electronics, Vol.11, pp.162~169.
[16] K. Yoshida, T. Maeoka, T. Ishii, H. Handa, and T. Ninomiya, 1996, “A novel zero-voltage-switched half-bridge converter with active current clamped transformer”, IEEE PESC, Vol.1, pp.632-637.
[17] Kuei-She Tai, 2003, Application of Electrical Circuit for I.C.,chwa.com, Taipei.
[18] Tsung-Ying Sun, and Jin-Ding Huang, 2001, Data manual of Linear I.C., Chwa.com, Taipei.