跳到主要內容

臺灣博碩士論文加值系統

(216.73.217.114) 您好!臺灣時間:2026/11/17 07:22
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:潘泰斗
研究生(外文):Tai-Tou Pan
論文名稱:可與微機電元件作單晶整合之多功能熱電偶微感測器
論文名稱(外文):Multi-Function Thermocouple-Based Micro-Sensor Capable of Being Monolithically Integrated with Micro Electro-Mechanical Devices
指導教授:蔡睿哲
口試委員:孫家偉、呂志偉
口試日期:2011-07-29
學位類別:碩士
校院名稱:國立臺灣大學
系所名稱:光電工程學研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2011
畢業學年度:99
語文別:中文
論文頁數:52
中文關鍵詞:微感測器、席貝克效應、熱電偶
外文關鍵詞:Micro-sensor、Seebeck effect、Thermocouple
相關次數:
  • 被引用被引用:0
  • 點閱點閱:292
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
微感測器如壓力感測器、加速度計、流量計為常見的微機電元件。隨著微機電製程與技術的進步,微感測器朝向多功能與尺寸微小化發展。
熱電偶是根據席貝克效應所製作的元件。本研究針對洪(2009)設計的四種型態熱電偶元件:重疊型熱電偶、非重疊型熱電偶、加長非重疊型熱電偶以及對稱型熱電偶,進行基本工作效能實驗、定溫變壓與定壓變溫實驗以及變換環境氣體(二氧化碳)組成實驗,探討其作為感測器的效果。
本研究實驗結果,四種型態熱電偶元件輸出電壓變化與加熱電流呈正相關。重疊型熱電偶與加長非重疊型熱電偶在固定加熱電流與環境溫度條件下,輸出電壓隨環境真空度增加而有上升的趨勢;而在固定加熱電流與環境氣壓條件下,輸出電壓則隨環境溫度升高,有增加的趨勢。
根據本研究成果,熱電偶元件可與其他微機電元件如陀螺儀製作在同一晶片上整合,作為多功能感測環境溫度、氣壓變化的微感測器使用。


Pressure sensor, accelerometer and flowmeter are common micro electro-mechanical devices. Along with the progress of micro electro-mechanical technique, micro-sensor becomes multi-functional and smaller.
Thermocouple is created basic on Seebeck effect. Hong (2009) designed four types of thermocouple devices: overlap thermocouple, non-overlap thermocouple, longer non-overlap thermocouple and symmetric thermocouple. This study proceeded basic efficiency experiment, fixed temperature to adjust pressure experiment, fixed pressure to adjust temperature experiment, and experiment of changing gas of the environment, to test thermocouple devices.
According to the result of experiments, the output voltage of thermocouple devices and heating current are positive correlation. Fixed heating current and environmental temperature, the output voltage of overlap and longer non-overlap thermocouple are increased when the environmental vacuum degree rises. Fixed heating current and environmental pressure, the output voltage of overlap and longer non-overlap thermocouple are increased when the environmental temperature rises.
According to the achievement of this study, the thermocouple devices can be used as multi-functional micro-sensor to sense the variation of environmental temperature and pressure, and are capable of being monolithically integrated with other micro electro-mechanical devices, such as gyroscope.


學位考試委員審定書 i
誌謝 ii
中文摘要 iii
英文摘要 iv
目錄 v
圖目錄 vii
表目錄 ix

第一章 前言 1
1.1 研究緣起 1
1.2 研究內容及目的 2
第二章 文獻回顧 3
2.1 微機電技術與製程 3
2.2 熱電偶工作原理 6
2.3 熱電偶感測器相關文獻 9
第三章 研究方法 13
3.1 實驗元件 13
3.1.1 重疊型熱電偶 13
3.1.2 非重疊型熱電偶 16
3.1.3 加長非重疊型熱電偶 19
3.1.4 對稱型熱電偶 20
3.2 實驗架構與步驟 24
3.2.1 熱電偶基本工作效能實驗 26
3.2.2 定溫變壓與定壓變溫實驗 28
3.2.3 變換氣體(二氧化碳)組成實驗 30
第四章 結果與討論 32
4.1 重疊型熱電偶 32
4.1.1 基本工作效能實驗結果 32
4.1.2 定溫變壓與定壓變溫實驗結果 33
4.2 非重疊型熱電偶 36
4.3 加長非重疊型熱電偶 38
4.3.1 基本工作效能實驗結果 38
4.3.2 定溫變壓與定壓變溫實驗結果 39
4.3.3 變換氣體(二氧化碳)組成實驗結果 41
4.4 對稱型熱電偶 43
4.5 綜合比較與分析 45
4.5.1 基本工作效能實驗結果比較與分析 45
4.5.2 定溫變壓與定壓變溫實驗結果比較與分析 45
第五章 結論與建議 49
5.1 結論 49
5.2 建議 50
參考文獻 51


王輔仁、許守平、林國堅、吳志雄、陳志明(2003)。熱電式冷卻系統之性能改善及應用研究。勤益學報,第二十一卷第一期,87-96。
沈靖凱(2009)。可寬頻操作且具備高感測靈敏度之微機電去耦合陀螺儀的設計與製作。國立台灣大學光電工程學研究所碩士論文。
林博文、張譽懷、王逸龍、林裕城(2008)。生活中的小助手-微感測器。科學發展,424,58-62。
洪家麒(2009)。可與微機電元件整合之熱電池研究。國立台灣大學光電工程學研究所碩士論文。
陳凱鑫(2010)。微機電陀螺儀與加速計之量測與分析。國立台灣大學光電工程學研究所碩士論文。
戴明鳳、董俊良(2009)。熱電偶式與熱敏式電子溫度器。電子式溫度感測元件實驗。
http://www.memscap.com/
Feynman R.P., 1992. There’s plenty of room at the bottom. Journal of Microelectromechanical Systems, vol. 1, No. 1.
Giani, A., Al Bayaz A., Boulouz A., Pascal-Delannoy F., Foucaran A., Boyer A., 2002. Thermoelectric microsensor for pressure and gas concentration measurement. Elsevier, Materials Science and Engineering B95, pp.268 – 274.
Muanghlua, R., Cheirsirikul, S., Supadech, S., 2000. The Study Of Silicon Thermopile. Proc of TENCON 2000, Vol 3, pp.226 - 229.
Ni, J., Benecke, W., Lang, W., 2008. Thermodynamic Analysis of a Novel Thermoelectric Microdroplet Sensor. Proc. of MEMS 2008, pp.928 – 931.
Randjelovic, D., Kaltsas, G., Lazic, Ž., Popovic, M., 2002. Multipurpose Thermal Sensor Based on Seebeck Effect. Proc. of Miel 2002, Vol 1, pp.261 – 264.
Tsang, See-Ho, Ma, A.H., Karim, K.S., Parameswaran A., Leung, A.M., 2008. Monolithically Fabricated Polymermems 3-axis Thermal Accelerometers Designed for Automated Wirebonder Assembly. Proc. of MEMS 2008, pp. 880 – 883.
Wang, Z., Leonov, V., Fiorini, P., Van Hoof C., 2007. Micromachined Thermopioles for Energy Scavenging on Human Body. Proc. of Transducers 2007, pp. 911 – 914.


QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top