臺灣博碩士論文加值系統

氣動鑽具系統具有高速、低耗能、低發熱量等優點，並廣泛應用於工具機、牙醫器械等領域中，為了深入探討其性能以及促進其發展，本論文目標在於研究開發精密動力量測系統。
根據針對牙醫手機動力量測系統的研究評估，本論文提出非接觸磁性負載原理來開發牙醫手機的動力量測系統。透過位移控制來平順地改變磁性負載，以取代多干擾的摩擦負載方式。除了可變動負載裝置外，動力量測系統還需要有待測牙科手機的夾持單元，以及動力量測感測器和控制單元。
作為動力量測性能的驗證，台灣微動股份有限公司之雙動力微小氣渦輪牙科手機被選為測試樣品。非接觸磁性負載裝置可以對高速旋轉筒匣施予穩定平順的剎車力，得以量測筒匣在不同供氣壓力、軸向與徑向負荷下的動力性能。實驗結果得知，氣渦輪牙科手機輸出的最大功率發生在空負載轉速的80％~90%之間，且約在空負載轉速的70％時有最大轉換率。

Because of advantages such as high-speed operation, low energy consumption and low heat emission, pneumatic drilling systems are widely used in the fields of machining tools and dental equipments. In order to comprehend its performance and to enhance its further development, the goal of this thesis is to develop an precision power measurement system.
According to our surveying evaluation of the current power measurement methods for dental handpieces, this thesis proposes using non-contact magnetic loading principle to develop a novel power measurement system for dental handpiece. Through displacement control, the magnetic loading can be smoothly varied to replace the easily interfered frictional loading principle. Besides the loading units, the power measurement system is comprised of the holder for dental handpiece, sensors for power measurement and control unit.
For performance verification of our developed power measurement system, the dental handpiece with the twin-powered micro turbine of MicroP Technology (Taiwan) Inc. is chosen as the testing specimen. The non-contact magnetic loading unit can successfully provide smooth and stable braking force for the high-speed rotating cartridge, so that the power performance of cartridge under different air supplies, axial and radial loadings can be measured. The experimental results show that, the maximum power occurs in the range of the 80 to 90 percent of the free running speed, and the maximum energy transformation efficiency appears at 70 percent of the free running speed.

目錄

致謝 Ⅰ
中文摘要 Ⅱ
英文摘要 Ⅲ
目錄 Ⅳ
表目錄 Ⅵ
圖目錄 Ⅶ
符號表 Ⅹ


第一章：緒論
1.1 研究背景與動機 1
1.2 文獻回顧 3
1.3 研究目標 7
1.4 章節內容與摘要 7
第二章：高速氣動轉子與性能量測方法
2.1 高速氣動轉軸種類 8
2.2 轉軸動力性能量測分析方法 9
2.2.1 轉動力矩量測方法 10
2.2.2 轉速量測方法 13
2.2.3 轉軸負荷量測方法 15
第三章：非接觸式磁性動力負載技術
3.1 磁性靜態與動態負載原理與應用 16
3.2 磁性靜磁力負載理論推導 17
3.3 磁性動態負載理論推導 20
3.3.1 渦電流理論推導 20
3.3.2 負載效應理論推導 24
3.3.3 集膚效應 27
第四章：整體量測平台之架構
4.1 待測物單元 30
4.2 性能檢測單元 31
4.3 位移控制單元 42
第五章：非接觸磁性負載量測平台之量測分析
5.1 性能量測單元校正實驗 44
5.2 渦輪式高速手機動態量測實驗 49
5.3 葉輪式低速手機動態量測實驗 54
5.4 誤差評估與結果探討 56
第六章：結論與未來展望 57
參考文獻 59
附錄 61

[1] Wang, S.C., and Huang, K.Y., “Research and development of minitype twin-bladed air turbine”, Proceedings of the ASME Turbo Expo, Vol. 5, 2009, pp. 175-182.
[2] Sabitov, V. Kh., Repin, V. A., and Kil''kinov, A. A., “RESEARCH AND DESIGN STUDIES ON MEDICAL MICROTURBINES”, Meditsinskaya Tekhnika No. 3, 30072, 1982, pp.5-9.
[3] Sabitov, V. K., Repin, V. A., and Fedorov, I. I., “STUDY OF DENTAL MICROTURBINE CHARACTERISTICS”, Meditsinskaya Tekhnika No. 3, 30072 1982, pp.24-28.
[4] Mathieson, D., Robertson, B. J., Beerschwinger, U., Yang, S. J., Reuben, R. L.,Addlesee, A. J., Spencer, J., and Lawes, R. A., “Micro torque measurements for a prototype turbine”, J. Micromech. Microeng., Vol. 4, 1994, pp.129-139.
[5] 柯彥旭, “牙醫手持鑽機性能檢測平台之設計與開發”, 台灣大學碩士論文, 2007
[6] Andreescu, R., Spellman, B., and Furlani, E.P., “Analysis of a non-contact magnetoelastic torque transducer”, Journal of Magnetism and Magnetic Materials, Vol. 320, 2008, pp.1827–1833
[7] 丁貫中, “整合微型氣靜壓軸承之微型氣動加工具系統之設計開發與性能探討” , 台灣大學碩士論文, 2010
[8] Dyson, J. E. and Darvell, B. W., “Torque, power and efficiency characterization of dental air turbinehandpieces”, J. Dent., Vol. 27(7), 1999, pp.573-586.
[9] Brockhurst, P. J. and Shams, R., “Dynamic measurement of the torque-speed characteristics of dental high speed air turbine handpieces”, Aust. Dent. J., Vol. 39(1), 1994, pp.33-38.
60
[10] Dyson, J. E. and Darvell, B. W., “Dental air turbine handpiece performance testing”, Aust. Dent. J., Vol. 40(5), 1995, pp.330-338.
[11] 谷腰欣司 編著，游金湖 譯，“磁性感測器及其使用技術”，建興出版社，1998。
[12] Stoll, R. L., “The Analysis of Eddy Currents” Clarendon Press, Oxford, 1974
[13] Hughes, S. B. “Magnetic Braking: Finding the Effective Length over which the Eddy Current Form,” Wooster Physics Junior Theses, May 2000
[14] Buckley, J. M., “An Introduction to Eddy Current Testing Theory and Technology,” Hocking NDT, May 2005
[15] Stephen, H. C. Norman, C. D., and Thomas, J. L., “An introduction to the mechanics of solids”, McGRAW-HILL International editions, second edition.
[16] 周尚德, “小型轉軸渦電流減震系統之設計開發與特性探討” , 台灣大學碩士論文, 2005
[17] 陳奕達, “氣靜壓磁浮混合式軸承之設計開發與性能探討” , 台灣大學碩士論文, 2006