|
[1] John F. Conley, “Instabilities in Amorphous Oxide Semiconductor Thin-Film Transistors,” IEEE Transactions on Device and Materials Reliability, vol. 10, no. 4, Dec. 2010. [2] M. J. Powell, C. van Berkel, I. D. French, and D. H. Nichols, “Bias dependence of instability mechanisms in amorphous silicon thin film transistors,” Appl. Phys. Lett., vol. 51, no. 16, Oct. 1987. [3] D. L. Staebler and C. R. Wronski, “Reversible conductivity changes in discharge produced amorphous Si,” Appl. Phys. Lett., vol. 31, no. 4, Aug. 1977. [4] Yuta Sugawara, Yukiharu Uraoka, Hiroshi Yano, Tomoaki Hatayama, Takashi Fuyuki, and Akio Mimura, “Crystallization of Double-Layered Silicon Thin Films by Solid Green Laser Annealing for High-Performance Thin-Film Transistors,” IEEE Electron Device Letters, vol. 28, no. 5, May 2007. [5] R. L. Hoffman, B. J. Norris, and J. F. Wager, “ZnO based transparent thin film transistors,” Appl. Phys. Lett., vol. 82, no. 5, Feb. 2003. [6] P. F. Carcia, R. S. McLean, M. H. Reilly, and G. Nunes, “Transparent ZnO thin-film transistor fabricated by RF magnetron sputtering,” Appl. Phys. Lett., vol. 82, no. 7, Feb. 2003. [7] H. S. Bae, M. H. Yoon, J. H. Kim, and Seongil Im, “Photodetecting properties of ZnO-based thin-film transistors,” Appl. Phys. Lett., vol. 83, no. 25, Dec. 2003. [8] S. Masuda, K. Kitamura, Y. Okumura, S. Miyatake, and H. Tabata, “Transparent thin film transistors using ZnO as an active channel layer and their electrical properties,” J. Appl. Phys., vol. 93, no. 3, Feb. 2003. [9] K. Nomura, H. Ohta, A. Takagi, T. Kamiya, M. Hirano and H. Hosono, “Room-temperature fabrication of transparent flexible thin-film transistors using amorphous oxide semiconductors,” Nature, vol. 432, no. 25, Nov. 2004. [10] H. Hosono, N. Kikuchi, N. Ueda, and H. Kawazoe, “Working hypothesis to explore novel wide band gap electrically conducting amorphous oxides and examples,” J. Non-Cryst. Solids, vol.200, pp. 165, 1996. [11] M. Orita, H. Ohta, M. Hirano, S. Narushima, and H. Hosono, “Amorphous transparent conductive oxide InGaO3(ZnO)m (m≤ 4): a Zn4s conductor,” Phil. Mag. B, vol.81, 2001. [12] S. Chang, Y. W. Song, S. Lee, S. Y. Lee,and B. K. Ju "Efficient suppression of charge trapping in ZnO-based transparent thin film transistors with novel Al2O3 /HfO2/Al2O3 structure," Appl. Phys. Lett., vol. 92, May 2008. [13] L. Y. Su, H. Y. Lin, H. K. Lin, S. L. Wang, L. H. Peng, and J. J. Huang, "Characterizations of Amorphous IGZO Thin-Film Transistors With Low Subthreshold Swing," IEEE Electron Device Lett., vol. 32, no. 9, Sep. 2011. [14] S. Y. Lee, S. Chang, and J. S. Lee, "Role of high-k gate insulators for oxide thin film transistors," Thin Solid Films, vol 518, 2010. [15] C. J. Chiu, S. P. Chang, and S. J. Chang, "High-Performance a-IGZO Thin-Film Transistor Using Ta2O5 Gate Dielectric," IEEE Electron Device Lett., vol. 31, no. 11, Nov. 2010. [16] H. Z. Zhang, L. Y. Liang, A. H. Chen, Z. M. Liu, Z. Yu, H. T. Cao, and Q. Wan, "High-performance transparent thin-film transistor based on Y2O3 / In2O3 with low interface traps," Appl. Phys. Lett., vol. 97, Sep. 2010. [17] A. H. Chen, L. Y. Liang, H. Z. Zhang, Z. M. Liu, X. J. Ye, Z. Yu, and H. T. Cao "Enhancement of a-IZO TTFT Performance by Using Y2O3/Al2O3 Bilayer Dielectrics," Electrochemical and Solid-State Lett. vol. 14, 2011. [18] International Technology Roadmap for Semiconductors, site: www.itrs.net/ [19] C. Auth, A. Cappellani, J.-S. Chun, A. Dalis, A. Davis, T. Ghani, G. Glass, T. Glassman, M. Harper, M. Hattendorf, P. Hentges, S. Jaloviar, S. Joshi, J. Klaus, K. Kuhn, D. Lavric, M. Lu, H. Mariappan, K. Mistry, B. Norris, N. Rahhal-orabi, P. Ranade, J. Sandford, L. Shifren, V. Souw, K. Tone, F. Tambwe, A. Thompson, D. Towner, T. Troeger, P. Vandervoorn, C. Wallace, J. Wiedemer, and C. Wiegand, “45nm High-k + Metal Gate Strain-Enhanced Transistors,” VLSI Symp. Tech., 2008. [20] G. He, M. Liu, L. Q. Zhu, M. Chang , Q. Fang, L. D. Zhang, “Effect of postdeposition annealing on the thermal stability and structural characteristics of sputtered HfO2 films on Si (100),” Surface Science, vol. 576, 2005. [21] J.I. Sung, J.S. Park, H. Kim, Y.W. Heo, J.H. Lee, J.J. Kim, G. M. Kim, and B. D. Choi, “Transparent amorphous indium zinc oxide thin-film transistors fabricated at room temperature” Appl. Phys. Lett., vol. 90, 2007. [22] Y. L. Wang, F. Ren, W. Lim, D. P. Norton, S. J. Pearton, I. I. Kravchenko, and J. M. Zavada, “Room temperature deposited indium zinc oxide thin film transistors,” Appl. Phys. Lett., vol. 90, 2007. [23] K. K. Banger, Y. Yamashita, K. Mori, R. L. Peterson, T. Leedham, J. Rickard and H. Sirringhaus, “Low-temperature, high-performance solution-processed metal oxide thin-film transistors formed by a ‘sol–gel on chip’ process,” Nature Materials, Dec. 2010. [24] D. C. Paine, B. Yaglioglu, Z. Beiley, and S. Lee, “Amorphous IZO-based transparent thin film transistors,” Thin Solid Films, vol. 516, Oct. 2007. [25] B. Yaglioglu, H. Y. Yeom, R. Beresford, and D. C. Paine, “High-mobility amorphous In2O3 –10 wt %ZnO thin film transistors,” Appl. Phys. Lett., vol. 89, 2006. [26] C. G. Choi, S. J. Seo, and B. S. Bae, “Solution-Processed Indium-Zinc Oxide Transparent Thin-Film Transistors,” Electrochemical and Solid-State Lett., 2008. [27] P. Barquinha, A. Pimentel, A. Marques, L. Pereira, R. Martins, and E. Fortunato, “Influence of the semiconductor thickness on the electrical properties of transparent TFTs based on indium zinc oxide,” Journal of Non-Crystalline Solids, vol. 352, 2006. [28] P. T. Liu, Y. T. Chou, and L. F. Teng, “Charge pumping method for photosensor application by using amorphous indium-zinc oxide thin film transistors,” Appl. Phys. Lett., vol. 94, 2009. [29] R. Martins, P. Barquinha, I. Ferreira, L. Pereira, G. Gonçalves, and E. Fortunato, “Role of order and disorder on the electronic performances of oxide semiconductor thin film transistors” J. Appl. Phys., vol. 101, Feb. 2007. [30] A. H. Chen, L. Y. Liang, H. Z. Zhang, Z. M. Liu, X. J. Ye, Z. Yu, and H. T. Cao, “Enhancement of a-IZO TTFT Performance by Using Y2O3/Al2O3 Bilayer Dielectrics,” Electrochemical and Solid-State Lett., vol. 14, 2011. [31] E. Fortunato, P. Barquinha, A. Pimentel, L. Pereira, G. Gonçalves, and R. Martins, “Amorphous IZO TTFTs with saturation mobilities exceeding 100 cm2/Vs,” Rapid Research Lett., no. 1, 2007. [32] J. Paivasaari, M. Putkonen, and L. Niinistf, “A comparative study on lanthanide oxide thin films grown by atomic layer deposition,” Thin Solid Films, vol. 472, 2005. [33] J. Robertsona, and B. Falabretti, “Band offsets of high K gate oxides on III-V semiconductors,” J. Appl. Phys., vol. 100, July 2006. [34] S. Jeon, K. Im, H. Yang, H. Lee, H. Sim, S. Choi, T. Jang, and H. Hwang, “Excellent Electrical Characteristics of Lanthanide (Pr, Nd, Sm, Gd, and Dy) Oxide and Lanthanide-doped Oxide for MOS Gate Dielectric Applications,” IEDM 2001, 2001. [35] G. D. Wilk, R. M. Wallace, and J. M. Anthony, “High-k gate dielectrics Current status and materials properties considerations,” J. Appl. Phys., vol. 85, no. 10, May 2001. [36] O. Engstrom, B. Raeissi, S. Hall, O. Buiu, M.C. Lemme, H.D.B. Gottlob, P.K. Hurley, and K. Cherkaoui, “Navigation aids in the search for future high-k dielectrics Physical and electrical trends,” Solid-State Electronics, vol. 51, 2007. [37] S. M. Sze, Physics of Semiconductor Devices, 1981. [38] S. Blonkowski, M. Regache, and A. Halimaoui, “Investigation and modeling of the electrical properties of metal–oxide–metal structures formed from chemical vapor deposited Ta2O5 films,” J. Appl. Phys., vol. 90, no. 3, Aug. 2001. [39] H. Hu, C. Zhu, Y. F. Lu, and M. F. Li, “A High Performance MIM Capacitor Using HfO2 Dielectrics,” IEEE Electron Device Lett., vol. 23, no. 9, Sep. 2002. [40] S. Becu, S. Cremer, and J. L. Autran, “Microscopic model for dielectric constant in metal-insulator-metal capacitors with high-permittivity metallic oxides,” Appl. Phys. Lett., vol. 88, 2006. [41] P. Gonon and C. Vallee, “Modeling of nonlinearities in the capacitance-voltage characteristics of high-k metal-insulator-metal capacitors,” Appl. Phys. Lett., vol. 90, April 2007. [42] P. Gonon and F. El Kamel, “Dielectric response of Cu/amorphous BaTiO3 /Cu capacitors,” J. Appl. Phys., vol. 101, April 2007. [43] F. El Kamel, P. Gonon and C. Vallée, “Experimental evidence for the role of electrodes and oxygen vacancies in voltage nonlinearities observed in high-k metal-insulator-metal capacitors,” Appl. Phys. Lett., vol. 91, Oct. 2007. [44] C. Wenger, G. Lupina, M. Lukosius, O. Seifarth, H.J. Mussig, S. Pasko, and Ch. Lohe, “Microscopic model for the nonlinear behavior of high-k metal-insulator-metal capacitors” J. Appl. Phys., vol. 103, May 2008. [45] D. Yang, Li J. Xue, and R. A. B. Devine, “Charge trapping in and electrical properties of pulsed laser deposited Sm2O3 films,” J. Appl. Phys., vol. 93, no. 11, June. 2003. [46] A.A. Dakhel, “Dielectric and optical properties of samarium oxide thin films,” Journal of Alloys and Compounds, vol. 365, 2004. [47] H. Yang, H. Wang, H. M. Luo, D. M. Feldmann, P. C. Dowden, R. F. DePaula, and Q. X. Jia, “Structural and dielectric properties of epitaxial Sm2O3 thin films,” Appl. Phys. Lett., vol. 92, Feb. 2008. [48] T. M. Pan, C. C. Huang, S. X. You, and C. C. Yeh, “Effect of Annealing on the Structural and Electrical Properties of High-k Sm2O3 Dielectrics,” Electrochemical and Solid-State Lett., vol. 11, no. 12, 2008. [49] Y. K. Chang, Y. R. Hwang, P. C. Juan, and Y. M. Lee, “Temperature Dependence of the Current Conduction Mechanisms in Sm2O3 Thin Films,” Journal of The Electrochemical Society, vol. 115, no. 12, 2008. [50] J. D. Chen, J. J. Yang, R. Wise, P. Steinmann, M. B. Yu, C. Zhu, and Y. C. Yeo, “Physical and Electrical Characterization of Metal–Insulator–Metal Capacitors With Sm2O3 and Sm2O3/SiO2 Laminated Dielectrics for Analog Circuit Applications,” IEEE Transactions on Electron Devices, vol. 56, no. 11, Nov. 2009. [51] T. M. Pan, and C. C. Huang, “Effects of oxygen content and postdeposition annealing on the physical and electrical properties of thin Sm2O3 gate dielectrics,” Applied Surface Science, vol. 256, 2010. [52] C. H. Kao, H. Chen, and S. P. Lin, “The Comparison of the High-k Sm2O3 and Sm2TiO5 Dielectrics Deposited on the Polycrystalline Silicon,” Electrochemical and Solid-State Lett., vol. 14, no. 2, 2011. [53] W. C. Chin, and K. Y. Cheong, "Effects of post-deposition annealing temperature and ambient on RF magnetron sputtered Sm2O3 gate on n-type silicon substrate," J Mater Sci: Mater Electron, April 2011. [54] Wikipedia, “http://en.wikipedia.org/wiki/Samarium” [55] Wikipedia, “http://en.wikipedia.org/wiki/Samarium(II)_iodide” [56] K. Li, Helen L. W. Chen, and C. L. Choy, “Samarium and Manganese-Doped Lead Titanate Ceramic Fiber/Epoxy 1-3 Composite for High-Frequency Transducer Application,” IEEE transactions on ultrasonics, ferroelectrics, and frequency control, vol. 50, no. 10, Oct. 2003. [57] Wikipedia, “http://en.wikipedia.org/wiki/Evaporation_(deposition)” [58] K. H. Lee, H. W. Jang, K. B. Kim, Y. H. Tak, and J. L. Lee, “Mechanism for the increase of indium-tin-oxide work function by O2 inductively coupled plasma treatment.” J. Appl. Phys., vol. 95, no. 15, Jan. 2004. [59] Wikipedia, “http://en.wikipedia.org/wiki/Atomic_force_microscopy” [60] J. Chen, W. J.g Yoo, and D. S. H. Chan, “Effects of N2, O2, and Ar plasma treatments on the removal of crystallized HfO2 film,” J. Vac. Sci. Technol. A, vol. 24, no. 1, Feb. 2006. [61] K. C. Liu, J. R. Tsai, W. K. Lin, C. S. Li, and J. N. Chen, “Defect passivation by O2 plasma treatment on high-k dielectric HfO2 films at room temperature,” Thin Solid Films, vol. 519, 2011.
|