跳到主要內容

臺灣博碩士論文加值系統

(216.73.216.206) 您好!臺灣時間:2026/11/21 18:35
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:王長亮
研究生(外文):Chang-Liang Wang
論文名稱:智慧型助行器之動力模組系統整合的研究
論文名稱(外文):Dynamic Module System Integration of Intelligent Walker
指導教授:陽毅平陽毅平引用關係
指導教授(外文):Yee-Pien Yang
學位類別:碩士
校院名稱:國立臺灣大學
系所名稱:機械工程學研究所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2004
畢業學年度:92
語文別:中文
論文頁數:130
中文關鍵詞:鎳鎘電池、阻尼器、助行器、電磁煞車
外文關鍵詞:Walker、brake、damper、Ni-Cd battery
相關次數:
  • 被引用被引用:8
  • 點閱點閱:447
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:1
本篇論文的目的是設計可提供重度失能者使用的新型助行器。新型助行器必須提供良好的支撐性及穩定度,並且要有速度控制及防滑機制以保護使用者的安全。
首先利用助行器的數學運動模型,分析助行器在不同尺寸下對煞車性能的影響。並在助行器的後輪上裝有電磁煞車,當助行器的速度過快時,控制器送出訊號啟動電磁煞車將後輪鎖住,以避免使用者發生危險。而為防止助行器滑動過快,在後輪也必須加裝阻尼裝置,可讓助行器在行進間提供適當的阻力,保護使用者的安全。因控制器及電磁煞車都必須在充足的電源下工作,因此控制器必須能夠提供一個良好的殘餘電量估測,避免因電源不足所產生的危險。


The purpose of this thesis is to develop a new design of the new walker which can provide better support and stability for the severely disabled. And the new walker must include the speed control and the device to prevent the user from falling down.
First, the mathematical dynamic model for the new walker is constructed. This model analyzes how the dimension of the walker influences the braking performance. Besides, the rear wheel of the walker is equipped with the electro- magnetic brake (EM brake) which can be triggered by the controller and therefore lock the rear wheel when the speed of the walker is too high. Furthermore, for the sake of the user’s safety, the damping device in the rear wheel can provide appropriate force to prevent the walker from slipping too fast. However, the controller and the EM brake have to work with sufficient supply power. As a result, the controller must be able to provide a good estimation for residual capacity of batteries to avoid possible dangers resulting from the insufficient power supply.


誌謝 Ⅰ
中文摘要 Ⅱ
英文摘要 Ⅲ
同意書 Ⅳ
目 錄 Ⅴ
圖表目錄 Ⅸ
第一章 緒論 1
1.1 研究動機和目的 1
1.2 文獻回顧 3
1.3 章節摘要 7
第二章 助行器動力模組系統 9
2.1 前言 9
2.2 人機動力系統 - 機械部份 10
2.3 智慧型煞車模組 11
2.4 殘電顯示系統 13
2.5 數位控制系統 14
2.6 智慧型助行器設計規格 14
第三章 人機動力系統 - 機械部份 16
3.1 助行器結構與動力模型 16
3.2 幾何與運動參數分析 19
3.3 推力與滑行距離分析 24
第四章 智慧型煞車模組 28
4.1 電磁煞車 28
4.1.1 磁路模型 28
4.1.2 磁能及力矩之計算 31
4.2 電磁煞車力矩最佳化設計 35
4.2.1 最佳化分析軟體(MOST)簡介 35
4.2.2 目標函數與限制條件 38
4.2.3 靈敏度分析 42
4.2.4 最佳化設計結果 48
4.3 阻尼器 54
4.3.1 工作原理 54
4.3.2 渦電流阻尼器分析 55
4.3.3 數值分析模擬 60
4.3.4 電磁阻尼器最佳化設計 63
4.4 後輪模組設計圖 68
第五章 殘電顯示系統 70
5.1 電池簡介 70
5.1.1 電池種類 70
5.1.2 常用的二次電池 71
5.1.3 電池基本特性 74
5.2 電池殘餘電量顯示 78
5.2.1 電池殘餘電量估測方法 78
5.2.2 助行器殘餘電量估測策略 82
第六章 數位控制系統 91
6.1 控制弁鉬搢D 91
6.2 控制系統架構 92
6.2.1 微處理器 94
6.2.2 電壓感測電路 98
6.2.3 電流感測電路 99
6.2.4 速度感測器 101
6.2.5 控制面板 102
第七章 殘電顯示實驗 105
7.1 實驗架構 105
7.2 實驗規劃 109
7.3 實驗結果與討論 111
第八章 結論與未來展望 116
8.1 結論 116
8.2 未來展望 117
參考文獻 118
附錄A 改良式後輪模組 121
附錄B 殘電顯示估測電路圖 124
附錄C 矽鋼片材料特性圖 126
附錄D 實驗設備規格 128


[1] Sung Chung Che, “Walking frame for disabled persons,” US Pat. 5816593, Oct. 6, 1998.

[2] Hormoz N. Fattihi and Fatemeh B. Rahimian, “Rolling walker adapted to negotiate uneven surfaces,” US Pat. 6666222, Dec. 23, 2003.

[3] Foley, Michael P.; Prax, Brian, Crowell, Richard; Boone and Tommy, “Effects of assistive devices on cardiorespiratory demands in older adults,” Physical Therapy, Vol. 76, No. 12, pp. 1313-1319, 1996.

[4] Mahoney, J., M.D.; Euhardy, R., P.T. and Carnes, M., M.D., “A comparison of a two-wheeled walker and a three-wheeled walker in a geritric population,” Journal of the American Geriatrics Society, Vol. 40, pp. 208-212, 1992.

[5] P. J. Woollam, K. Miller, N. McLeod, D. Batty and J. Stallard, “Structural design and performance of a rear support walking frame,” Proceedings of the Institution of Mechanical Engineers. Part H - Journal of Engineering in Medicine, Vol. 216, No. 3, pp.201-209, 2002.

[6] A. Barry Deathe, M.D.; Richard D. Pardo, MSc; David A. Winter, PhD; Keith C. Hayes, PhD; Jennifer Russell-Smyth, BscCP, “Stability of walking frames,” Journal of Rehabilitation Research and Development, Vol. 33, No. 1, pp. 30-35, 1996.

[7] ISO 11199-1~2, Walking aids manipulated by both arms, 1999.

[8] M.V.K. Chari, S.J. Salon, Numerical Methods in Electromagnetism, 2000.

[9] Addison Wesley, Field and Wave Electromagnetics, 2nd Edtion, 1989.

[10] Nagaya, K.; Kojima, H.; Karube, Y. and Kibayashi, H., “Braking forces and damping coefficients of eddy current brakes consisting of cylindrical magnets and plate conductors of arbitrary shape,” IEEE Transactions on Magnetics, Vol. 20, No. 6, pp. 2136-2145, Nov., 1984.

[11] Nagaya, K. and Karube, Y., “A rotary magnetic damper or brake consisting of a number of sector magnets and a circular conductor,” Journal of Dynamic Systems, Measurement and Control, Transactions ASME, Vol. 111, No. 1, pp. 97-104, Mar., 1989.

[12] Perry, Michael P., “Eddy current damping due to a linear periodic array of magnetic poles,” IEEE Transactions on Magnetics, Vol. 20, No. 1, pp. 149-155, Jan., 1984.

[13] Edwards, J.D.; Jaywant, B.V.; Dawson, W.R.C. and Wright, D.T., “Permanent-magnet linear eddy-current brake with a non-magnetic reaction plate,” IEE Proceedings: Electric Power Applications, Vol. 146, No. 6, pp. 627-631, Nov., 1999.

[14] Shuo Pang, Jay Farrell, Jie Du, and Matthew Barth, “Battery state-of-charge estimation,” Proceedings of American Control Conference, Arlington, VA, USA, Vol. 2, pp. 1644-1649, 2001.

[15] 蔡家豪,“智慧型電動機車殘餘電池容量估測之研製”,國立臺灣大學機械工程研究所碩士論文,2003.

[16] Chenghui Cai, Dong Du, Zhiyu Lui, Jingtian Ge, “State-of-charge (SOC) estimation of high power Ni-MH rechargeable battery with artificial neural network,” Proceeding of the 9th International Conference on Neural Information Processing (ICONIP’02), Vol. 2, pp. 824-828, 2002.

[17] Ichiro KIYOKAWA, Kei NIIDA, Tomonobu TSUJIKAWA, “Integrated VRLA- Battery management system,” Telecommunications Energy Conference, 2000. INTELEC. Twenty-second International, Phoenix, Arizona U.S.A., pp. 703-706, 11-14 Sept. 2000.

[18] 周裕福,“二次電池之電學特性與應用”,工業材料,2003

[19] 孫清華編譯,最新可充電電池技術大全,全華科技圖書股份有限公司,2001

[20] GPI International Ltd., NiCd Technical Hand Book.


[21] Sabine Piller, Marion Perrin, Andreas Jossen, “Methods for state-of-charge determination and their applications,” Journal of Power Sources, Vol. 96, No. 1, pp. 113-120, Jun 1, 2001.

[22] Shinya Sato and Atsuo Kawamura, “A new estimation method of state of charge using terminal voltage and internal resistance for lead acid battery,” Proceedings of the Power Conversion Conference, 2002. PCC Osaka 2002., Vol. 2, pp. 565-570, 2-5 April 2002.

[23] John R. Reitz, Frederick J. Milford and Robert W. Christy, Foundations of electromagnetic Theory, 4th Edition, 1993.

[24] Nova Orthopedic & Rehabilitation Appliances Inc.,http://www.novaortho.com.tw

[25] Rifton Equipment, http://www.rifton.com

[26] 林河安,“電動車直流無刷車輪馬達之力矩漣波的降低與最佳化再設計”,國立臺灣大學機械工程研究所碩士論文,2003.

[27] Predrag Prodanovic and Slobodan P. Simonvic, “Fuzzy compromise programming for group decision making,” IEEE Transactions on Systems, Man and Cybernetics, Part A, Vol. 33, No. 3, pp. 358-365, May, 2003.

[28] Hawker Inc., “Genesis Application Manual, Fifth Edition,” 2000.

[29] 吳一農,單晶片8051實務,增修版,松崗電腦圖書資料股份有限公司,2002.

[30] Duane C. Hanselman, Brushless permanent-Magnet Motor Design, McGraw-Hill, New York, 1994.

[31] GPI International Ltd., GP NiCd Rechargeable Batteries.

[32] 吳煌榮,章良渭,陽毅平,智慧型助行器創新研發計劃,經濟部工業局,92.4.1.


QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top