跳到主要內容

臺灣博碩士論文加值系統

(216.73.216.206) 您好!臺灣時間:2026/11/21 18:35
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:洪達志
研究生(外文):Horng, Ta-Jyh
論文名稱:結合機器人/虛擬真實之智慧型人機介面
論文名稱(外文):An Intelligent Human-Machine Interface for Robot/VR Integration
指導教授:楊谷洋, 蘇順豐
指導教授(外文):Kuu-Young Young, Shun-Feng Su
學位類別:碩士
校院名稱:國立交通大學
系所名稱:控制工程系
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:1997
畢業學年度:85
語文別:中文
論文頁數:6
中文關鍵詞:虛擬真實、去毛邊、基因法則、模糊邏輯
外文關鍵詞:virtual reality、deburring、genetic algorithm、fuzzy logic
相關次數:
  • 被引用被引用:2
  • 點閱點閱:315
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:2
為了加強在順應性工作執行時人類技巧的轉移, 我們在這篇論文中提出
一個智 慧型人機介面來結合機器臂與虛擬實境模擬系統. 這篇論文分為
兩部份, 在第 一部份, 我們提出了一個用於順應性工作的人類技巧轉移
方法. 一般說來, 在 處理順應性工作所碰到的困難主要導因於兩個理由.
一是很難清楚地去描述一 個順應性工作的執行過程. 二是即使執行相同
的工作, 但因為環境特徵的變化 而造成機器臂與工作環境產生不同的交
互作用. 有些學者就想要利用人類技巧 轉移的方法來解決上述的問題.
然而現今已提出的人類技巧轉移方法仍存在許 多不足, 因為人類與機器
臂在控制方法與機構上的不同. 所以我們在此提出一 個結合模糊邏輯及
基因法則架構的方法, 經由學習的能力來改善人類技巧的獲 取. 這個提
出的方法應用在去毛邊的順應性工作上來作為例證. 在第二部份, 我們
則發展一個結合機器人與虛擬真實的人機介面. 它不僅提供了一個可供模
擬的三維空間虛擬環境, 也提供了可與外部真實機器人通訊的介面. 操作
者可 藉由此介面同時控制虛擬及真實機器臂. 因為此介面可在真實實驗
前提供更多 的資訊, 當它被應用於電腦輔助設計及電腦輔助製造也是非
常有幫助的.
In order to enhance human skill transfer for compliant task
execution, in this thesis, we propose an intelligent human-
machine interface to integrate robot manipulators with the
virtual reality simulation system. The thesis is divided into
two parts. In Part I, we propose a human skill transfer scheme
for compliant tasks. Difficulties in dealing with
compliant tasks mainly result fromtwo reasons. First, it is hard
to describe the process of the compliant task execution
precisely. Second, even for the same kind of compliant tasks,
when theenvironment features vary, it may invoke different
interaction between robot manipulators and the environment.
Some researchers proposed using the technique of human skill
transfer to tackle the problems aforementioned. The current
humanskill transfer schemes are still with many deficiencies
because the differences are present between the human and the
robot manipulators in their mechanisms andcontrol strategies. We
then propose a genetic-based fuzzy scheme to improve the ability
in human skill acquisition via its learning capability. The
proposed scheme is applied to the deburring compliant task
for demonstration. In Part II,we develop a human-machine
interface for Robot/VR integration. It not only provides a
3D virtual environment for simulations, but can also communicate
withthe external robot manipulator. The operator can control the
virtual and real manipulators via this robot/VR interface
simultaneously. As the proposed interface can provide
much information via simulations before experiment
execution, it is also useful when applied to CAD (computer aided
design) and CAM(computer aided manufacture).
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊