|
[1]http://www.memsnet.org/material/ [2]J.E. Sanders, C.H. Daly, “Normal and shear stresses on a residual limb in a prosthetic socket during ambulation: Comparison of finite element results with experimental measurements,” J Rehab Res Dev 30(2) 191-204, 1993. [3]G.E. Reiber, “Who is at Risk of Limb Loss and What to do about it?” J Rehab Res Dev 31(4) 357-362, 1994. [4] J.B. Huang, S. Tung, C.M. Ho, C. Liu and Y.C. Tai, “ Improved Micro Thermal Shear-Stress Sensor,” IEEE Transactions on Instrumentation and Measurement, vol. 45, no. 2, pp. 570-574, 1996. [5] A. Padmanabhan, M. Sheplak, K.S. Breuer and M.A. Schmidt, “Micromachined Sensors for Static and Dynamic Shear -Stress Measurements in Aerodynamic Flows,” 1997 International conference on Solid-State Sensors and Actuators, Chicago, June 16-19,1997. [6] A.M. Lebar, G.F. Harris, J.J. Wertsch and H. Zhu, “An Optoelectric Plantar Shear Sensing Transducer: Design, Validation, and Preliminary Subject Tests,” IEEE Transactions on Rehabilitation Engineering, vol.4, no.4, December 1996. [7] T. Pan, D. Hyman, M. Mehregany, E. Reshotko and S. Garverick, “Microfabricated Shear Stress Sensors, Part 1: Design and Fabrication,” AIAA Journal, vol.37,no.1, pp. 66-72, January, 1999. [8]M.C. Hsieh, Y.K. Fang, M.S. Ju, G.S. Chen, J.J. Ho, C.H. Yang, P.M. Wu, C.S. Wu and T.Y. Chen “A Contact Type Piezoresistive Micro-Shear Sensor For Above - Knee Prosthesis Application” IEEE Journal of Microelectromechnical Systems, Vol. 10, No. 1, pp. 121-127, March, 2001. [9]Ise N, Katsuura T, Kikuchi Y, Miwa E, “Effect of far-infrared radiation on forearm skin blood flow,” Ann Physiol Anthropol, Jan 1987,6(1), pp.31-32. [10]M.C. Hsieh, Y.K. Fang, P.M. Wu and W.D. Wang, “Crystal SiGeC far infrared sensor with temperature isolation improvement structure”, Electronics letters, volume 39; No. 8, 17th, April 2003, pp.656-658. [11]S. Sedky, P. Fiorini, M. Caymax, A. Verbist, and C. Baert, “IR bolometers made of polycrystalline silicon germanium,” Sens. Actuators A, vol. 66, no.1-3, pp.193-199, Apr. 1998. [12]J.L. Regolini, F. Gisbert, G. Dollino, and P. Boucaud, “Growth and characterization of strain compensated Si1-x-yGexCy epitaxial layers,” Mater. Lett., vol. 18, pp. 57, Nov. 1993. [13]M.C. Hsieh, Y.K. Fang, P.M. Wu, C.C. Yang, Y.C Lin, W.D. Wang. S.F. Ting and J.J. Ho “Design and farabrication of a novel crystal SiGeC far infrared sensor with wavelength 8-14 micrometer”, Sensors Journal IEEE, volume2; Issue: 4, pp.360-365. August 2002, [14]M. Park, S. Lee, C. S. Kim, H. K. Yu, and K. S. Nam, “The detailed analysis of high CMOS-compatible microwave spiral inductors in silicon technology,” IEEE Trans. Electron Devices, vol. 45, pp. 1953-1959, Sept. 1998. [15]B.H. Cho, J.H. Lee, Y.H. Bae, C.S. Cho and J.H. Lee, “Fabrication of Micro-Inductor and Capacitor For RF MEMS Applications,” Journal of Semiconductor Technology and Science, vol. 2, N O. 2, pp. 102-110, June.2002. [16]M.C. Hsieh, Y.K. Fang, C.H. Chen, S.M. Chen, and W.K. Yeh. “Design and Fabrication of Deep Sub-Micron CMOS Technology Compatible Suspended High-Q Spiral Inductors”, IEEE Transaction on Electron Devices, Vol. 51, No. 3, pp.324-331, 2004. [17]J.E. Sanders, C.H. Daly, “Normal and shear stresses on a residual limb in a prosthetic socket during ambulation: Comparison of finite element results with experimental measurements,” J Rehab Res Dev 30(2) 191-204,1993. [18]G.E. Reiber, “Who is at Risk of Limb Loss and What to do about it?” J Rehab Res Dev 31(4) 357-362,1994. [19]J.B. Huang, S. Tung, C.M Ho, C. Liu and Y.C. Tai, “Improved Micro Thermal Shear-Stress Sensor,” IEEE Transactions on Instrumentation and Measurement, vol. 45, no. 2, pp. 570-574, 1996. [20]A. Padmanabhan, M. Sheplak, K.S. Breuer and M.A. Schmidt, “Micromachined Sensors for Static and Dynamic Shear -Stress Measurements in Aerodynamic Flows,” 1997 International conference on Solid-State Sensors and Actuators, Chicago, June 16-19,1997. [21]A.M. Lebar, G.F. Harris, J.J. Wertsch and H. Zhu, “An Optoelectric Plantar Shear Sensing Transducer: Design, Validation, and Preliminary Subject Tests,” IEEE Transactions on Rehabilitation Engineering, vol.4, no.4, December 1996. [22]Tao Pan, Daniel Hyman, M. Mehregany, Eli Reshotko and Steven Garverick, “Microfabricated Shear Stress Sensors, Part 1: Design and Fabrication,” AIAA Journal, vol.37,no.1, pp. 66-72, January, 1999. [23]M. Lord, R. Hosein, and R.B. Williams, “Method for in-shoe shear stress measurement,” J. Biomed. Eng., vol.14,no.3,pp.181-186,1992. [24]J.E. Gragg, W.E. McCulley, W.B. Newton and C.E. Derrington, “Compensation and Calibration of a Monolithic four Terminals Silicon Pressure Transducers,” Tech Digest IEEE Solid-state sensor Workshop, Hilton Head Island, SC, USA, pp.21-27, 1984. [25]Kurt E. Petersen, “Silicon as a Mechanical Material,” Proc. IEEE, vol. 70, no. 5, pp. 420-457, May 1982. [26]O.N. Tutte, P.W. Chapman, and D. Long, “Silicon Diffused Element Piezoresistive Diaphragm,” J. Appl. Phys., vol.33, pp.3322-3327, Nov.1962. [27]Y. Kanda, “A Graphical Representation of the Piezoresistance Coefficients in Silicon,” IEEE Transactions on Electron Devices, vol. ED-29, no.1, January 1982. [28]A.C. Ugural, Mechanics of Materials, McGraw-Hill, New York, Chap.4, 1991. [29]S.M. Sze, Semiconductor Sensors, John Wiley & Sons, INC., New York, pp. 180, 1994. [30] M.C. Hsieh, Y.K. Fang, M.S. Ju, G.S. Chen, J.J. Ho, C.H. Yang, P.M. Wu, C.S. Wu and T.Y. Chen, “A Contact Type Piezoresistive Micro-Shear Sensor For Above - Knee Prosthesis Application” IEEE Journal of Microelectromechnical Systems, Vol. 10, No. 1, pp. 121-127, March, 2001 [31] Ise N, Katsuura T, Kikuchi Y, Miwa E, “Effect of far-infrared radiation on forearm skin blood flow,” Ann Physiol Anthropol, Jan 1987,6(1), pp.31-32. [32] Ogita S, Imanaka M, Matsuo S, Takebayashi T, Nakai Y, Fukumasu H, Matsumoto M, Iwanaga K, “Effects of far-infrared radiation on lactation,” Ann Physiol Anthropol, Apr 1990,9(2), pp.83-91. [33] H. Jerominek, F. Picard, N. Swart, M. Renaud, M. Levesque, M. Lehoux, J. Sebastien, M. Pelletier, G. Bilodeau, D. Audet, T. Pope, and P. Lambert, “Micromachined, uncooled, VO2-based IR bolometer arrays,” SPIE Aerosense, Orlando, FL, vol.2746, pp.60, Apr. 1996. [34] J. Shie, Y. Chen, M. Ou-Yang, and B. Chou, “ Characterization and modeling of metal-film microbolometers,” J. Microelectromech. Syst., vol.5, pp.298, Dec.1996. [35] M.H. Unewisse, B.I. Craige, R.J. Watson, O. Reinhold, and K. C. Liddiard, “The growth and properties of semiconductor bolometers for infrared detection,” SPIE, vol.2554, no.43, pp.43, 1995. [36] S. Sedky, P. Fiorini, M. Caymax, A. Verbist, and C. Baert, “IR bolometers made of polycrystalline silicon germanium,” Sens. Actuators A, vol. 66, no.1-3, pp.193-199, Apr. 1998. [37] J. L. Regolini, F. Gisbert, G. Dollino, and P. Boucaud, “Growth and characterization of strain compensated Si1-x-yGexCy epitaxial layers,” Mater. Lett. , vol. 18, pp. 57, Nov. 1993. [38] F. Ericson, and J.A. Schweitz, “Micromechanic Fracture Strength of Silicon,” J. Appl. Physics, vol.68, no.11, Dec. 1990, pp.5840~5844. [39] A. D. Parsons, D.J. Pedder, “Thin-film infrared absorber structures for a dvanced thermal detectors,” J. Vac. Sci. Technol. A6, pp.1686-1689, 1988 [40] D. Lienhard, F. Heepmann, and B. Ploss, “Thin Nickel Filma as Absorbers in Pyroelectric Sensor Arrays,” Microelectronic Engineering, vol. 29, pp.101-104, 1995. [41] W.T. Hsieh, Y.K. Fang, S.F. Ting, Y.S. Tsair, W.J. Lee, and H.P. Wang, “Improving High Temperature Characteristic of SiGeC/Si Hetrojunction Diode with Propane Carbon Source,” Solid State Electronics, vol., pp.,2002 [42] P. Warren, M. Dutoit, P. Boucaud, J. –M Lourtioz, and F. H. Julien, “RTCVD growth and characterization of SiGeC multi-quantum well,” Thin Solid Films 294, pp. 125-128, 1997 [43] M.C. Hsieh, Y.K. Fang, P.M. Wu, C.C. Yang, Y.C Lin, W.D. Wang. S.F. Ting and J.J. Ho “Design and farabrication of a novel crystal SiGeC far infrared sensor with wavelength 8-14 micrometer”, Sensors Journal IEEE, volume2; Issue:4, August 2002, pp.360-365 [44] M.C. Hsieh, Y.K. Fang, P.M. Wu and W.D. Wang, “Crystal SiGeC far infrared sensor with temperature isolation improvement structure”, Electronics letters, volume 39; No. 8, 17th, April 2003, pp.656-658. [45] K.C. Liddiard, “Thin Film Resistance Bolometer IR Detectors,” Infrared Phys, vol. 24,pp.57, 1984. [46] M. Park, S. Lee, C. S. Kim, H. K. Yu, and K. S. Nam, “The detailed analysis of high CMOS-compatible microwave spiral inductors in silicon technology,” IEEE Trans. Electron Devices, vol. 45, pp. 1953-1959, Sept. 1998. [47] B.H. Cho, J.H. Lee, Y.H. Bae, C.S. Cho and J.H. Lee, “Fabrication of Micro-Inductor and Capacitor For RF MEMS Applications,” Journal of Semiconductor Technology and Science, vol. 2, N O. 2, pp. 102-110, June.2002. [48] A. M. Niknejad and R. G. Meyer, “Analysis, design, and optimization of spiral inductors and transformers for Si RF IC’s,” IEEE J. Solid-State Circuits, vol. 33, pp. 1470-1481, Oct. 1998. [49] K. B. Ashby, A. Koullias, W. C. Finley, J. J. Bastek, and S. Moinian,”High Q inductors for wireless applications in a complementary silicon Bipolar process,” IEEE J. Solid-State Circuits, vol. 31, pp. 4-9, Jan.1996. [50] M. Park, S. Lee, C. S. Kim, H. K. Yu, and K. S. Nam, “The detailed analysis of high CMOS-compatible microwave spiral inductors in silicon technology,” IEEE Trans. Electron Devices, vol. 45, pp. 1953-1959, Sept. 1998. [51] J. Chuang, S. Ghazaly, N. Zein, G. Maracas, and H. Gronkin, “Low loss air-gap spiral inductors for MMICs using glass microbump bonding techniques,” IEEE MTT-S International Microwave Symposium Digest, vol.2, pp. 131-133, 1998. [52] Y. Sun, H. van Zeijl, J. L. Tauritz, R. G. F. Baets, “Suspended Membrane Inductors and Capacitors for Application in Silicon MMIC’S,” IEEE Microwave and Millimeter-Wave Monolithic Circuits Symposium, pp. 99-102, 1996. [53] Jae Y. Park, and Mark G. Allen, “High Q Spiral-Type Microinductors on Silicon Substrates,” IEEE Transactions on Magnetics, vol. 35, No. 5, pp. 3544-3546, Sept. 1999. [54] J. Y.-C. Chang, A. A. Abidi, and M. Gaitan, “Large suspended inductor on silicon and their use in a 2-μm CMOS RF amplifier,” IEEE Electron Device Letter, vol. 14, No. 5, pp. 246-248, May 1993. [55] Tony Yeung, Alan Pun, Zhiheng Chen, Jack Lau, and Francois J.R. Clement, “Noise coupling in heavily and lightly doped substrate from planar spiral inductor,” IEEE International Symposium on Circuits and Systems, pp.1405-1408, 1997. [56] R.P. Ribas, J. L. Leclercq, J.M. Karam and F. Ndagijimana, “Monolithic Micromachined Planar Spiral Transformer,” IEEE Transactions on Microwave Theory and Techniques, vol.48, No. 8, pp. 1326-1334, Aug, 2000. [57] C. H. Chen, “The studies of High Performance Passive Devices with CMOS Compatible Technology for High Voltage and RF System Applications,” June, 2003. [58] M.C. Hsieh, Y.K. Fang, C.H. Chen, S.M. Chen, and W.K. Yeh. “Design and Fabrication of Deep Sub-Micron CMOS Technology Compatible Suspended High-Q Spiral Inductors”, IEEE Transaction on Electron Devices, vol. 51, No. 3, pp.324-331,2004 [59] D. Hisamoto, S. Tanaka, T. Tanimoto, S. ichiro Kimura, “Suspended SOI Structure for Advanced 0.1-mm CMOS RF Devices,” IEEE Transactions on Electron Devices, vol.45, No. 5, pp. 1039-1046, May 1998. [60] J.B. Yoon, B.K. Kim, C.H. Han, E.Yoon, and C.K. Kim, “Surface Micromachined Solenoid On-Si and On-Glass Inductors for RF Applications,” IEEE Electron Device Letter, vol. 20, No.9, pp. 487-489, September 1999. [61] S. Seok, C. Nam, W. Choi, and K. Chun, “A High Performance Solenoid-Type MEMS Inductor,” Journal of Semiconductor Technology and Science, vol. 1, No. 3, pp. 182-188, September 2001. [62] A. Zolfaghari, A. Chan, and B. Razavi, “Stacked Inductors and Transformers in CMOS Technology,” IEEE Journal of Solid-State Circuits, vol. 36, no. 4, pp.620-628, April 2001. [63] M. Lord, R. Hosein and R.B. Williams, “Method for in-shoe shear stress measurement” J. Biomed. Eng, vol. 14, pp. 181-186, May, 1992 [64] M.C. Hsieh, Y.K. Fang, M.S. Ju, G.S. Chen, J.J. Ho, C.H. Yang, P.M. Wu, C.S. Wu and T.Y. Chen, “A Contact Type Piezoresistive Micro-Shear Sensor For Above - Knee Prosthesis Application” IEEE Journal of Microelectromechnical Systems, Vol. 10, No.1, pp. 121-127, March, 2001 [65] Fredric M. Ham, “Determination of Glucose Concentrations in an Aqueous Matrix from NIR Spectra Using Optiamal Time-Domain Filtering and Partial Least-Squares Regression”, IEEE Transactions on Biomedical Engineering, vol.44, No. 6, June, 1997. [66] Tokuo Ogawa, “Dynamic sweating response of man to infrared irradiation in various spectral regions”, Int J Biometeorol, vol.35, pp. 18-23, 1991
|