臺灣博碩士論文加值系統

輥壓成型加工是高分子加工領域中的一項重要製程，目前已被廣泛的應用在平板、薄膜等生活中常見用品的製造。近年來，由輥壓製程所壓延成型的高分子薄膜的相關技術已發展成熟，但隨著製品厚度減小、要求的厚度精度提高，輥壓技術面臨更嚴峻的挑戰。
本研究目的是要了解高分子薄膜在輥壓變更參數中薄膜厚度的變化、回復率以及有無氣泡的產生等。並藉由輥筒參數差異所引發的不同現象作為往後輥壓機輥筒的設計改良、操作與維護的重要指標。
本研究自行設計製作了一套高分子材料輥壓設備來進行薄膜輥壓實驗，探討高分子薄膜於輥壓製程中影響厚度均勻性的原因，包括利用輥壓機輥筒的操作參數，如輥筒的冷卻溫度、輥筒轉速、輥筒間的間距等以得到具有良好表面品質和厚度均勻的高分子薄膜。
研究結果顯示，在相同的輥筒間距以及相同的輥筒表面溫度下，薄膜試片的輥出速度越慢，則試片在前後兩端各自的厚度差異上，改善效果較佳也較明顯。而在相同的輥筒間距以及相同薄膜試片的輥出速度下，輥筒的表面溫度越高，輥壓出來的試片整體厚度較為均勻且試片回復率也越低。另外，輥筒間距越小，在試片前後兩端的厚度落差上越能接近一致。本研究的結果可提供未來改進輥筒設備，以及進一步提升高分子輥壓精度的參考。

Roll Forming is an important process in the domain of the polymer processing , simply is widely used in manufacturing processes to increase the life of plates and film . In recent years , various rolling processes for forming polymer film have been developed . However, as with the product thickness decreases , achieving the required accuracy is extremely challenging .
This study analyzed polymer film characteristics in terms of roll parameters , film thickness , the response rate of film and bubble generation . Roller parameters were compared between different phenomena as an important indicator of the roller for use in , future designs for improving operation and maintenance . This study also designed new polymer material rolling equipment to achieve uniform thickness in rolling process . Operational parameters analyzed for the roller included the cooling temperature of roller , roller speed and the roll gap between the rollers . The objective was to optimize parameters needed to achieve a good surface quality and a uniform thickness in the polymer film .
The experimental results show that , given a similar roll gap and roller surface temperature , the difference in improvements at the ends increases as the roll speed of the film specimen decreases . Given a similar roll gap and roll speed of the film specimen , overall uniformity of roller thickness increases and response rate decreases as the surface temperature of the roller increases . Additionally , as the roll gap decreases , the difference in thickness at the ends of the specimen decreases . The experimental results of this study provide a reference for improving roller devices and polymer roll accuracy .

第一章 序論 1
1.1 研究背景 1
1.2 文獻探討 3
1.3 研究動機與目的 6
1.4 研究方法 7
第二章 高分子輥壓成型 8
2.1 輥壓製程簡介 8
2.1.1 輥壓機的分類 8
2.1.2 輥壓機的工作原理 9
2.2 輥壓的機制 12
2.3 輥壓製程主要參數 14
2.4 高分子薄膜在寬度方向上的厚度均勻性之影響因素 19
2.5 輥壓機輥筒簡介 21
2.5.1 輥筒結構形式 21
2.5.2 輥筒撓度補償 23
第三章 輥壓高分子薄膜的厚度均勻性控制實驗 28
3.1 實驗設計 28
3.2 實驗設備與材料 30
3.2.1 輥壓設備 30
3.2.2 高分子薄膜材料 33
3.3 實驗參數 35
3.4 實驗步驟與方法 37
第四章 輥壓模具設計製作與薄膜量測結果與討論 39
4.1 螺旋式輥筒薄殼與螺距的設計 39
4.2 輥壓機台的架設 47
4.3 進、出水裝置的設計 50
4.3.1 O型環的作用原理 54
4.3.2 O型環與進、出水裝置的的使用選定 55
4.4 薄膜輥壓結果與討論 58
4.4.1 輥壓速度對薄膜厚度的影響 61
4.4.2 輥筒間距對薄膜厚度的影響 72
第五章 結論與建議 80
5.1 結論 80
5.2 建議與未來展望 82
參考文獻 83
附錄 進、出水裝置的設計圖 86

[1] 姜智埕，“熱塑性複合材料現況專題調查報告”，初版，工業技術 研究院 化學工業研究所，中華民國八十六年六月。
[2] 張豐志，“應用高分子手冊”，初版，五南圖書出版股份有限公 司，中華民國九十四年二月。
[3] 巫靜安，“壓延成型與製品應用”，初版，化學工業出版社，中華民國九十二年七月。
[4] 趙俊會，“塑料壓延成型”，初版，化學工業出版社，中華民國九十六年。
[5] L . J. Broutman , R . S. Patil ,“Cold Rolling of Polymers 1.Influence of Rolling on Properties of Amorphous Polymer” , Polymer Engineering and Science , Vol.11 , No. 2 , 1971 .
[6] L . J. Broutman , S . Krishnakumar ,“Cold Rolling of Polymers 2. Toughness Enhancement in Amorphous Polycarbonates”, Polymer Engineering and Science ,Vol.14 , No. 4 , 1974 .
[7] L . J. Broutman , T . Kobayshi ,“Cold Rolling of Polymers 3. Properties of Rolled Crystallized Polycarbonates”, Polymer Engineering and Science ,Vol. 14 , No. 4 , 1974 .
[8] L . J. Broutman , S . Krishnakumar ,“Cold-Rolling of Polymer 4. Toughness Enhancement in Amorphous Polymers”, Polymer Engineering and Science ,Vol. 14 , No. 12 , 1974 .
[9] S . Bahadur , “Strain Hardening Equation and the Prediction of Tensile Strength of Rolled Polymers” , Polymer Engineering and Science , Vol. 13 , No. 4 , 1973 .
[10] S . Bahadur , A . Henkin , “Investigation of the Ductility of Rolled Polymers” , Polymer Engineering and Science , Vol.13 , No.6 , 1973 .
[11] V . Dhingra , J . Spruiell , E . Clark , “The Relationship Between Mechanical Properties and Structure in Rolled Polypropylene” , Polymer Engineering and Science , Vol. 21 , No. 16 , 1981 .
[12] T . A . Stolarski , S . M . Hosseini , Shogo Tobe ,“Surface fatigue of polymers in rolling contact”,Wear , Vol. 214 , pp. 271-278 , 1998 .
[13] T . A . Stolarski , S . L . Al-Sabti ,“Surface fatigue of brittle polymers in rolling line contact”, Tribology International , Vol. 31 , No. 11, pp. 695–699 , 1998 .
[14] S . Luther , D . Mewes ,“Three-dimensional polymer flow in the calendar bank”, Polymer Engineering and Science , Vol. 44 , pp. 1642-1647 , 2004 .
[15] J . Agassant , M . Epy ,“Theoretical and experimental study of the molten polymer flow in the calender bank”, Polymer Engineering and Science ,Vol. 25 , pp.118-121 , 1985 .
[16] E . Mitsoulis , J . Vlachopoulos , F . Mirza , “Calendering analysis without the lubrication approximation”, Polymer Engineering and Science , Vol. 25 , pp. 6-18 , 1985 .
[17] M . C . Serrat , J . Laffargue , J . Agassant , J . Bikard ,“Calendering of coextruded polymer structures”, Vol. 10 , pp. 791-794 , 2008 .
[18] 蕭德瑛，『送紙機構之動態分析與量測』，國立清華大學，碩士論文，民國九十六年。
[19] M . Harrass , K . Friedrich , A . A . Almajid ,“Tribological behavior of selected engineering polymers under rolling contact”, Tribology International, Vol. 43 , pp. 635-646 , 2010 .
[20] M . D . Lutton , T . A. Stolarski ,“The Effect of Water Lubrication on Polymer Wear under Rolling Contact Conditions”, Journal of Applied Polymer Science, Vol. 54 , pp. 771-782 , 1994 .
[21] Hie-Young Oh , Byung H . Kim ,“The Effect of Rolling Orientation on the Brittle-Ductile Transition in Polycarbonate Fracture”, Polymer Engineering and Science, Vol. 26, No. 18, 1986 .
[22] Shin-ichi Matsuoka ,“Effects of cold-rolling on the cold forging of solid polymer”, Journal of Materials Processing Technology, Vol. 84 , pp. 175-180 , 1998 .
[23] S . Z . Wu , W . B . Lee ,“Modeling of the elastic properties of cold-rolled polypropylene sheets”, Scripta Materialia, Vol. 46 , pp. 587-592 . 2002 .
[24] J . Piotrowski , K . Knothe ,“Experimental investigation of rolling contact of rigid bodies with polymer coating”,Wear, Vol. 219 , pp. 105-113 , 1998 .
[25] D . F . Charlesa , R . Gnanamoorthyb , Parag Ravindrana ,“Rolling contact fatigue behavior of polyamide clay reinforced nanocomposite—Effect of load and speed”,Wear , Vol. 269, pp. 565-571, 2010 .
[26] K . R. Tate , A . R . Perrin ,“Molecular Orientation of Polypropylene by Rolling-Drawing”, Polymer Engineering and Science, Vol. 28, No.19 , 1988 .
[27] 洪瑞庭，“塑膠加工技術與工程”，第四版五刷，高立圖書有限公司，中華民國九十三年。
[28] 周殿明，“塑料壓延技術”，初版，化學工業出版社，中華民國九十四年。
[29] 高孟暉，『PC/PMMA共擠製模內流動現象初步探討』，國立交通大學，碩士論文，民國一百年七月。
[30] Zehev Tadmor著，“塑膠加工原理”，初版，孫志雄譯，孫志雄，中華民國七十四年十二月。
[31] S . J .Krause , W . F .Hosford ,“Texture Development in Polyethylene 2. Unidirectional Rolling”, Journal of Polymer Science , Vol. 27, pp. 1867-1887 , 1989 .