臺灣博碩士論文加值系統

本論文提出一個壓控增益光接收器設計，應用於光無線通訊。使用電壓控制電阻0.3kΩ ~ 3kΩ 及5pF的光二極體電容負載下，可達到77dBΩ的轉阻增益及103MHz的頻寬，其消耗功率為34 mW。此接收器晶片採用TSMC 0.35μm 2P4M 製程與3.3V電壓電源實現，總面積為825um × 666um，最後並附上量測結果。

A Voltage-controlled variable-gain optical receiver for optical wireless communication is described. Under a photodiode capacitance of 5pF, the transimpedance gain, bandwidth, and power consumption of the optical receiver are 77dBΩ, 103MHz, and 34 mW respectively. A CMOS voltage-control resistor is adopted in the feedback transimpedance amplifier. The receiver is designed and implemented using a 0.35μm 2P4M CMOS technology with 3.3V supply voltage. The final implementation occupies a total area of 825um × 666um.

摘要 i
ABSTRACT ii
誌謝 iii
目錄 iv
表目錄 vi
圖目錄 vii
第一章 緒論 1
1.1 研究背景 1
1.2 研究動機 1
1.3 論文架構 2
第二章 研究考量 3
2.1 光檢測元件 3
2.2 光接收器架構 6
2.3 轉阻放大器設計考量 8
2.4 光二極體輸入偏壓級設計考量 13
2.5 電壓控制電阻設計考量 15
2.6 放大器之眼圖分析 17
2.7 IrDA 規格範例 23
第三章 紅外光接收器之設計與模擬 27
3.1 Proposed Results 27
3.2 DC Photocurrent Rejection Circuit 28
3.3 VOLTAGE-CONTROLLED RESISTOR（VCR） 34
3.4 CMOS FULLY DIFFERENTIAL TRANSIMPEDANCE AMPLIFIER 37
3.5 Photodiode Bias Input Stage 43
3.6 OFFSET EXTRACTOR & DTSEC 44
3.7 BIAS CIRCUIT 46
第四章 光接收器之模擬與量測結果 48
4.1 整體佈局考量 48
4.2 壓控增益光接收器之模擬結果 52
4.3 壓控增益光接收器之測試考量 56
第五章 結論 58
參考文獻 59
簡歷 61

[1]Infrared Data Association（IrDA, 紅外線數據協會）, http://www.irda.org .
[2]R. G. Meyer and W. D. Mack, “A wide-band low-noise variable-gain BiCMOS
transimpedance amplifier,” IEEE J. Solid-State Circuits, vol. SC-29, no.6,
pp. 701~706, June 1994.
[3]H. Khorramabadi, L. D. Tzeng, and M. J. Tarsia, “A 1.06Gb/s-31dBm to 0dBm
BiCMOS optical preamplifier featuring adaptive transimpedance,” IEEE
International Solid-State Circuits Conference (ISSCC) Digest of Technical
Papers, pp. 54~55, Feb. 1995 .
[4]K. Phang and D. A. Johns, “A CMOS optical preamplifier for wireless
infrared communication,” IEEE Trans. on Circuits and Systems-II, vol. 46,
no. 7, pp. 852~859, July 1999.
[5]B. Zand, K. Phang, and D. A. Johns, “Transimpedance amplifier with
differential photodiode current sensing,” in Proc. IEEE International
Symposium on Circuits and Systems (ISCAS), pp. II-624~627, 1999.
[6]K. Phang and D. A. Johns, “A 3-V CMOS optical preamplifier with DC
photocurrent rejection,” in Proc. IEEE International Symposium on Circuits
and Systems (ISCAS), pp. I-305~308, 1998.
[7]B. Zand, K. Phang, and D. A. Johns, “A transimpedance amplifier with DC-
coupled differential photodiode current sensing for wireless optical
communications,” in Proc. IEEE Custom Integrated Circuits Conference
(CICC), pp. 21-3-1~4, 2001.
[8]C.-S. Hsieh and H.-Y. Huang, “A high-bandwidth wireless infrared receiver
with feedforward offset extractor,” in Proc. IEEE International Symposium
on Circuits and Systems (ISCAS), pp. I-73~76, 2003.
[9]B. Wilson and J. Drew, “Novel transimpedance amplifier formulation
exhibiting gain-bandwidth independence,” in Proc. IEEE International
Symposium on Circuits and Systems (ISCAS), pp. 169~172, 1997.
[10]B. Razavi, Design of Analog Integrated Circuits, McGraw-Hill: Boston, 2001.
[11]S. M. Park and C. Toumazou, “Low noise current-mode CMOS transimpedance
amplifier for Giga-bit optical communication,” in Proc. IEEE
International Symposium on Circuits and Systems (ISCAS), TAA 8-4, June
1998.
[12]D. A. Johns and K. W. Martin, Analog Integrated Circuit Design, John Wiley
& Sons: New York, 1997.
[13]P.-C. Huang, Y.-H. Chen, and C.-K. Wang, “A 2-V CMOS 455-KHz FM/FSK
demodulator using feedforward offset cancellation limiting amplifier,”
IEEE J. Solid-State Circuits, vol. 36, no. 1, pp. 135~138, 2001.
[14]N. Tadic and H. Zimmermann, "Low-power BiCMOS optical receiver with
voltage-controlled transimpedance," IEEE Journal of Solid-State Circuits,
vol. 42, no. 3, pp. 613-626, march 2007 .
[15]N. Tadic and H. Zimmermann, "Optical receiver with widely tunable
sensitivity in BiCMOS Technology," IEEE Transactions on Circuits and
Systems I: Regular Papers, vol. 55, no. 5, pp. 1223-1236, June 2008 .
[16]N. Tadic´ and D. Gobovic´, “A voltage-controlled resistor in CMOS
technology using bisection of the voltage range,” IEEE Trans. Instrum.
Measur., vol. 50, no. 12, pp. 1704–1710, Dec. 2001 .
[17]施敏原著，黃調元譯，”半導體元件物理與製作技術”，第二版，國立交通大學出版社，民國91年
[18]Khoman Phang, “CMOS Optical Preamplifier Design Using Graphical Circuit
Analysis,” Ph.D. Thesis, Department of Electrical and Computer
Engineering, University of Toronto, 2001.
[19]Behzad Razavi and Jafer Savoj, “High-Speed CMOS Circuit for Optical
Receiver,” Kluwer Academic, May 2001.
[20]A. D. Djemouai, M. A. Sawan, M. Slamani, “New Frequency-Locked Loop Based
on CMOS Frequency-to-Voltage Converter: Design and Implementation,” IEEE
Trans. on Circuits and Systems-II, vol. 48, no. 5, pp. 441~449, July 2001.
[21]B. Razavi, Design of Integrated Circuits for Optical Communications,
McGraw-Hill: Boston, 2003
[22]P. C. Huang, Y. H. Chen, and C. K. Wang, “A 1.2-V CMOS Limiter / RSSI /
Demodulator for Low-IF FSK Receiver,” IEEE Custom Integrated Circuits
Conference (CICC), pp. 217–220, 2007 .
[23]Huei-Yan Huang, Jun-Chau Chien, “A 10-Gb/s Inductorless CMOS Limiting
Amplifier With Third-Order Interleaving Active Feedback” Solid-State
Circuits, IEEE Journal of Volume 42, Issue 5, pp. 1111~1120, May 2007.