跳到主要內容

臺灣博碩士論文加值系統

(216.73.217.114) 您好!臺灣時間:2026/11/17 07:22
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:何志傑
研究生(外文):He, Zhi-Jie
論文名稱:微機電系統運用於微電子感測器研究
論文名稱(外文):A study of high performance sensors with micro-electro-mechanical system (MEMS) technology
指導教授:方炎坤方炎坤引用關係、朱銘祥朱銘祥引用關係
指導教授(外文):Fang, Yan-Kun、Zhu, Ming-Xiang
學位類別:博士
校院名稱:國立成功大學
系所名稱:電機工程學系
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:1998
畢業學年度:86
語文別:中文
中文關鍵詞:超大型積體電路、酒精氣體感測器、機械傳輸、熱隔絕、微感測器、微機電系統
外文關鍵詞:MEMS、VLSI
相關次數:
  • 被引用被引用:0
  • 點閱點閱:575
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:1
Cover
CONTENTS
Chinese Abstract
Chinese Chapter
Acknowledgements
Abstract
Table Lists
Figure Captions
Chapter1
1-0 Background
1-1 Micro-electro-mechanical process design
1-2 Preface of this dissertation
Chapter2 High Performance Tradititional Semiconductor Infrared Sensors
2-0 Background
2-1 High-gain p-i-n infrared photosensors with Bragg reflectors on amorphous silicon-germanium alloy
2-1.1 Introduction
2-1.2 Device fabrication and measurements
2-1.3 Device operational mechanism
2-1.4 Results and discussions
2-2 Switching transient analysis of a metal/ferroelectric/semi-conductor switch diode with high speed response to infraredlight
2-2.1 Introduction
2-2.2 Theoretical analysis
2-2.3 Results and discussions
Chapter3 MEMS Technology Applied Optical Sensors
3-0 Background
3-1 Design and fabrication of a pyroelectric thin-film infrared sensor with thermal isolation improvement structure
3-1.1 Introduction
3-2 Theoretical analysis
3-3 Experimental fabrication and measurement
3-4 Results and discussions
Chapter4 MEMS Technology Applied Chemical Sensors
4-0 Background
4-1 High sensitivity ethanol gas sensor integrated with a solid-state heater and thermal isolation improvement structure
4-1.1 Introduction
4-1.2 Operational mechanism
4-1.3 Device fabrication and measurement
4-1.4 Results and discussions
Chapter5 MEMS Technology Applied for Mechanicial Sensors
5-0 Background
5-1 Development of micro-pressure sensors for rehabilitation engineering applications
5-1.1 Introduction
5-1.2 Design of a micro-pressure sensor
5-1.3 Fabrication and measurements
5-1.4 Results and discussions
Chapter6 Conciusion and Prospects
6-1 Conclusion
6-2 Prospects
References
Tables and Figures
Appendix A Author''s Resume
Appendix B Author''s Related Publication
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top