臺灣博碩士論文加值系統

ACKOWLEDGMENTS I
CHINESE ABSTRACT II
ENGLISH ABSTRACT IV
LIST OF FIGURES IX
LIST OF TABLES XII
CHAPTER I INTRODUCTION 1
CHAPTER II THEORIES AND LITERATUREVIEW 4
2.1 Display 4
2.2 Liquid crystal 8
2.3 The UV curing of resin 13
2.4 Spacer 17
2.5 Method of liquid crystal injection 21
CHAPTER III EXPERIMENT 24
3.1 Experimental Process 24
3.2 Materials 25
3.3 Preparing of UV-PU 31
3.4 Specimens preparing 36
3.5 Tensile test 41
3.6 Viscosity test 43
3.7 Hardness test 44
3.8 Imprint process 45
3.9 Anti-Press test 46
3.10 Scanning electron microscope (SEM) 47
3.11 Stylus profiler 48
3.12 UV/Visible 49
3.13 Flexible property test 50
3.14 Liquid crystal injection 51
3.15 Electro-Optical display test 53
CHAPTER IV RESULTS AND DISCUSSION 54
4.1 The mechanical properties of UV-PU 54
4.2 Effect of rotational speed rate on PU spacer material 60
4.3 Effect of molding pressure on PU spacer material 71
4.4 The height of shaped spacer 75
4.5 The load capacity of spacer by anti-press test 79
4.6 Flexible property test of display device 83
4.7 The electro-optical characteristic of flexible display device 86
CHAPTER V CONCLUSIONS 89
REFERENCES 93

[1] C. M. Hsu, C. J. Chang, W. T. Wu, IDW 2009, 2009.
[2] S. Y. Hwang, H. Y. Jung, J. H. Jeong, H. Lee, Thin Solid Films, TSF-25673; P4, 2009.
[3] C. Barron, J. Angele, L. Bajic, L. Dozov, J. Brill, J. Specht F. Leblanc, S. Perny, Journal of the SID, (2005) 193.
[4] S. J. Jang, J. H. Kim, J. H. Bae, Y. Choi, H. R. Kim, S. I. Kim, S. Shin, J. H. Kim, SID (2007) 120.
[5] http://www.go-gddq.com/html/s736/2010-08/504164.htm
[6] 黃雅鈴、傅永貴，類紙式膽固醇液晶顯示器，國立成功大學物理研究所碩士論文 (2005)。
[7] 陳信吉、蕭忠信，可撓性平面顯示器產品及製程設備介紹，機械工業期刊，(2005) 63。
[8] http://en.wikipedia.org/wiki/Plasma_display
[9] http://en.wikipedia.org/wiki/OLED
[10] S. H. Yoon, S. J. Shin, B. C. Kim, S. H. Lee, K. Y. Koo, US 7570338 B2, Aug. 4, 2009
[11] P. G. de Gennes and J. Prost, The Physics of Liquid Crystals, 2nd ed., Clarendon Press, Oxford (1993) 23.
[12] 陳怡君、傅永貴，對膽固醇液晶雷射輸出大範圍調控之研究，國立成功大學物理研究所碩士論文，(2005)。
[13] L. M. Blinov, V. G. Chigrinov, Electrooptic Effects in Liquid Crystal Materials, Springer-Verlag Publishing Co., New York (1994) 22.
[14] B. Bahadur, Liquid Crystals：Applications and Uses, 1, World Scientific, Singapore (1990) 30.
[15] 許千樹，液晶顯示器技術手冊，全華科技圖書股份有限公司出版公司，第二章，(2004) 16。
[16] 趙中興，顯示器原理與技術，全華科技圖書股份有限公司，第十一章，(2002)。
[17] F. Reinitzer, “Beitrage zur Kenntniss des Cholesterins,” Wiener Monatsschr, Fiir Chem, vol.9, (1888) 421.
[18] http://www.csupomona.edu/~jarego/pages/LC_intro.html.
[19] 黃子強，液晶顯示原理，國防工業出版社，(2008) 14。
[20] 松本正一，角田市良，液晶之基礎與應用，國立編譯館，(1996) 11。
[21] http://atom.physics.calpoly.edu/~ifernsler/Research/Liquid%20Crystals/LCResearch.html.
[22] http://en.wikipedia.org/wiki/Cholesteric_liquid_crystal.
[23] P. Swaraj, Surface Coatings-Science and Technology; Wiley: Chichester, Chapter 8, (1985) 601.
[24] J. W. Rosthauser, K. Nachtakamp, J. Coating Fabrics, 16 (1986) 39.
[25] J. Szmuszkovicz, M. P. Kane, L. G. Laurian, T. A. Scahill, J. Org. Chem., 46 (1981) 3562.
[26] Y. Ittah, Y. Sasson, I. Shahak, S. Tsaroom, J. Blum, J. Org. Chem., 43, (1978) 4271.
[27] A. Hassner and J. Galle, E. J. Org. Chem., 47 (1976) 2273.
[28] Y. G. Gololobov, I. N. Zhmurova, L. F. Kasukhin, Tetrahedron, 37 (1981) 437.
[29] D. H. Wadsworth, J. Org. Chem., 32 (1967) 1184.
[30] G. N. Chen, K. N. Chen, J. Appl. Polym. Sci. 71 (1999) 903.
[31] 王德海，江櫺，紫外光固化材料，科學出版社，(2001) 23。
[32] 盧崑宗，張家偉，單體種類及光引發劑添加量對環氧壓克力紫外線硬化型塗料性質之影響，林業研究季刊29(2)，2007
[33] 林昭安、許世興，具吸汗功能的醫藥級(油性)壓克力黏著劑之開發，朝陽科技大學應用化學系碩士論文 (2004)
[34] C. M. Hsu, C. J. Chang, W. T. Wu , IDMC, Apr. 27-30, Taipei, Taiwan, p. Wed-P4-09 (2009).
[35] P. G. Le Comber, W. E. Spear , A. Ghaith, Electron Lett., 15(1979) 179.
[36] A. J. Snell, K. D. Mackenzie, W. E. Spear, P. G. Le Comber, A. J. Hughes, 80 Europhysics Conf., (1980) 99.
[37] Y. Okubo, T. Nakagiri, Y. Osada, M. Sugata, N. Kitahara, K. Hatanaka, SID 82 Tech. Digest, (1982) 40.
[38] S. G. Kim, Y. S. Kim, A. K. Srivastava, S. T. Oh, G. D. Lee, S. H. Lee, Current Applied Physics 8 (2008) 142.
[39] H. Hah, S. J. Sung, M. Han, S. S. Lee, J. K. Park, Displays 29 (2008) 478.
[40] H. Lee, S. Hong, K. Yang, K. Choi, Microelectron. Eng. (2006) 323.
[41] S. Y. Hwang, H. Y. Jung, J. H. Jeong, H. Lee, Thin Solid Films 517 (2009) 4104.
[42] K. S. Bae, H. R. Kim, Y. M. Kim, J. H. Kim, SID DIGEST, (2007) 661.
[43] H. Hah, S. J. Sung, M. Han, S. S. Lee, J. K. Park, Displays 29 (2008) 478.
[44] 李昌周、柯志諭、張耀仁、莊佳橙、楊仁傑、吳文端、許進明, 常壓下軟性液晶顯示器封裝技術,機械工業雜誌307 期10 月號, (2008) 45。
[45] K. C. Fan, J. Y. Chen, C. H. Wang, W. C. Pan, Sens. Actuators, A 147 (2008) 649.
[46] K. J. Lee, J. M. Park, H. C. Kim, J. H. Seo, Y. J. Kim, B. H. Jung, C. H. Park, IDW 09 (2009) 533 .
[47] W. T. Wu, Y. C. Kuo, C. M. Hsu, C. C. Li, C. Y. Ke, C. H. Hsiao, SID (2007) 393.
[48] M. Zenga, L. Zhanga, and J. F. Kennedy. Carbohydr. Polym., 60 (2005) 399.
[49] 馬祥泰、林弘萍，以紫外光聚合法合成高透明壓克力高分子與中孔洞氧化矽複合材料之研究，國立成功大學化學研究所碩士論文 (2006)
[50] 李家豪、邱顯堂，環氧壓克力系樹脂光硬化行為與光學性質之研究，國立台灣科技大學高分子工程研究所碩士學位論文 (2005)
[51] 王維廷、何志松，紫外光固化聚酯壓克力樹脂及其性質之研究，私立東海大學化學工程研究所碩士論文 (2008)
[52] B. D. Washo, IBM J. Res. , 21(1977)190.
[53] S. A. Jenekhe, Polym. Eng. Sci., 23 (1983) 830.
[54] B. G. Higgins, Phys. Fluids, 29 (1986) 3522.
[55] J. H. Lai, Polym. Eng. Sci., 19 (1979) 1117.
[56] F. L. Givens, W. J. Daughton, J. Electrochem. Soc., 126 (1979) 269.
[57] W. J. Daughton, F. L. Givens, J. Electrochem. Soc., 129 (1982) 173.
[58] B. T. Chen, Polym. Eng. Sci., 23 (1983) 399.
[59] A. Weill, E. Dechenaux, Polym. Eng. Sci., 28 (1988) 945.
[60] L. L. Spangler, J. M. Torkelson, J. S. Royal, Polym. Eng. Sci., 30 (1990) 644.
[61] J. Q. Pham, P. F. Green, J. Chem. Phys., 116 (2002) 5801.
[62] J. H. Kim, J. Jang, W. C. Zin, Langmuir, 17 (2001) 2703.
[63] W. M. Yu, K.W. Yeung, S. C. Harlock, G. A. V. Leaf, Textile Res.J 4 (1998) 289.
[64] M. Mucha, Prog. Polym. Sci. 28 (2003) 837
[65] Jee-Hyun Ryu, Young-Hun Choi, Kyung-Do Suh, Colloids and Surfaces A: Physicochem. Eng. Aspects 275 (2006) 126
[66] F. Z. Abdounea, L. Benkhaledb, L. Mechernenea, U. Maschkeb, Physics Procedia 2 (2009) 643