臺灣博碩士論文加值系統

　　本研究欲建立商品在允許缺貨的情況下之非即時損耗性商品的採購策略，同時考慮了商品是具有剩餘價值的存貨模型。當商品具有剩餘價值且允許缺貨的情形時，此時，需求率為固定常數，並將損耗率假設為兩階段的變化。首先，大多數商品在存貨開始階段不會有損耗情形的發生，而經過一段時間後，商品則會開始產生損耗且損耗率為一個固定常數。然而，當商品在開始階段的損耗是具有剩餘價值，反之，過了某個時點之後商品損耗則會產生額外的處理成本。本文中所建立的數理存貨模型是以傳統的最佳化理論來求得存貨相關總成本為最小值並找出最適當的生產策略。最後，利用數值範例說明求解結果。

　　In this study, an inventory model is established for non-instantaneous deteriorating items with allowable salvage value and shortage. Under the conditions of salvage value and shortage, the constant production rate and demand rate, are considered the deterioration rate can be divided into two stages. Beginning the model , the goods won’t deteriorate in this period , but after a constant time , the goods is starting to deteriorate as a constant rate. The optimal solution procedures for the present problems are provided, and numerical examples are also followed to illustrate the above-mentioned models

中文摘要 i
英文摘要 ii
目錄 iii
表目錄 v
圖目錄 vi
　
第一章 緒論1
1.1 研究動機與目的1
1.2 文獻探討 2
1.3 研究方法 5
1.4 研究流程 5
　
第二章 考慮剩餘價值及非即時損耗性商品在允許缺貨下之存貨模型 8
2.1 假設與符號 8
2.2 模式建立 10
2.3 演算法 14
2.4 數值範例 14
2.5 敏感度分析 15
　
第三章 線性生產並考慮剩餘價值及非即時損耗性商品在允許缺貨下之存貨模型21
3.1 模式建立 21
3.2 演算法 25
3.3 數值範例 26
3.4 敏感度分析 26
　
第四章 生產與存貨水準有關並考慮剩餘價值及非即時 損耗性商品在允許缺貨下之存貨模型 33
4.1 模式建立 33
4.2 演算法 37
4.3 數值範例 38
4.4 敏感度分析 38
　
第五章 結論及研究建議 45
5.1 結論 45
5.2 研究建議 47
　
參考文獻 49
附錄一 51
附錄二 52
附錄三 53
個人簡歷 54

1.Chung, K.J. & Hou, K.L.(2003), An Optimal Production Run Time with Imperfect Production Processes and Allowable Shortages, Computers & Operations Reserch , Vol.30, pp.483-490.
　
2.Cohen, M.A.(1977), Joint pricing and ordering policy for exponentially decaying inventory with know demand, Naval Research Logistics Quarterly, Vol.24, pp.257-268.
　
3.Ghare, P.M., & Schrader, G.F.(1963), A model for an exponentially decaying inventory, Journal of Industrial Engineering, Vol.14, pp.238-243.
　
4.Hariga, M., & Ben-Daya, M. (1999), Some stochastic inventory models with deterministic variable lead time, European Journal of Operational Research, Vol.113, pp.42-51.
　
5.Harris, F.W. (1915), Operations and Cost, Factory Management Series, pp.48-52.
　
6.Manna, S.K. & Chaudhurt, K.S.(2001), An economic order quantity model for deterioration items with time-dependent deterioration rate, demand rate, unit production cost and shortage, International Journal of Systems Science, Vol.32, pp.1003-1009.
　
7.Nahmias, S. (1978),Perishable inventory theory : a Review, Operations Research, Vol. 30, No.4, pp.680-708.
　
8.Padmanabhan, G. & Vrat, P. (1995), EOQ models for perishable items under stock dependent selling rate, European Journal of Operational Research ,Vol. 86, pp.281-292.
　
9.Raafat, F.(1991), Survey of literature on continuously deterioration, inventory models, Journal of the Operational Research Society, Vol.42, No.1, pp.27-37.
　
10.Sana, S., Goyal, S.K.& Chaudhuri, K.S. (2004), A production-inventory model for a deteriorating item with trended demand and shortages, European Journal of Operational Research, Vol.157, pp.357-371.
　
11.Silver, E.A.(1981), Operations research in inventory management: A Review and Critique, Operations Research, Vol.29, No.4, pp.628-645.