臺灣博碩士論文加值系統

根據Wittrick的12條微分方程式並且加入預扭角效應，本文利用Rayleigh-Ritz方法建立了空間曲樑結構的一維有限元素運動方程式，以使用在具有預扭角螺旋彈簧的分析。對具預扭角螺旋彈簧問題，本文修正之Wittrick的12條微分方程式可利用轉置矩陣法(transfer matrix method)解得其正解。由此正解中之位移函數(displacement functions)可求得本文彈簧元素之內插函數，以使用在本文建立之有限元素方程式中求取元素之質量矩陣與勁度矩陣。本文建立之有限元素分析模式使用於具預扭角螺旋彈簧的自然頻率與模態分析時，為簡化分析，因此本文將具預扭角螺旋彈簧的每個元素之扭轉角度固定，但彼此間並不相同。當使用的元素數目增加，此種簡化作法所導致的幾何誤差可以減小。本文有限元素分析結果並和文獻中不同作法的結果作比較。由數值結果可展現本文具預扭角螺旋彈簧元素的準確性與效率。同時本文亦探討一些參數，如邊界條件、彈簧圈數、矩形剖面長寬比與材料性質等，對具預扭角螺旋彈簧自然頻率與模態的影響。

Following the Wittrick’s twelve differential equations modified with including the pre-twisted angles effect, the present study uses the Rayleigh-Ritz method to develop the one-dimensional finite element equations of motion for the spatial curved beams which can be used in the analysis of pre-twisted helical springs. For the static problems of pre-twisted helical springs, the modified Wittrick’s twelve differential equations can be solved for the exact solutions by the transfer matrix method. The displacement functions in the exact solutions are used to derive the interpolation functions which are used in the computation of the mass and stiffness matrices of the present spring element. The present finite element model is applied in the free vibration analyses of pre-twisted helical springs. To simplify the analysis, constant but different pre-twisted angle is assumed for each element of a pre-twisted helical spring, and the geometric error incurred can be reduced if the number of elements is increased. The present model performance is compared with the analytic solutions of different approaches in the literature. The accuracy and efficiency of the present pre-twisted helical spring element are demonstrated through the numerical results. Also the effects of some parameters, such as boundary condition, number of coils, aspect ratio of the rectangular cross-section and material properties, on the natural frequencies and modes of pre-twisted helical springs are investigated.

摘要 I
ABSTRACT II
誌謝 Ⅲ
目錄 IV
附圖索引 VI
附表索引 X
符號表 XI
第一章 緒論…………………………………………………………1
1.1前言………………………………………………………………1
1.1.1彈簧的種類……………………………………………………2
1.1.2彈簧材料的性質與選用………………………………………4
1.2文獻回顧…………………………………………………………6
1.3研究目的與內容…………………………………………………10
第二章 建立具預扭角螺旋彈簧之運動方程式……………………11
2.1具預扭角螺旋彈簧的幾何方程式…………………………………11
2.1.1空間曲線之路徑座標系統(path coordinate system)……11
2.1.2 Frenet-Serret 公式………………………………………14
2.1.3螺旋彈簧的幾何方程式推導…………………………………14
2.2具預扭角螺旋彈簧之運動方程式………………………………19
2.2.1具預扭角螺旋彈簧的本構與靜平衡方程式…………………19
2.2.2推導具預扭角螺旋彈簧之運動方程式………………………24
第三章 具預扭角螺旋彈簧有限元素運動方程式推導………………28
3.1 建立具預扭角螺旋彈簧元素之力與位移向量函數………………28
3.2有限元素運動方程式.………………………………………………31
3.2.1具預扭角螺旋彈簧有限元素運動方程式推導…………………31
3.2.2具預扭角螺旋彈簧元素矩陣與力向量之估算………………36
第四章　具預扭角螺旋彈簧模態分析與結果…………………………40
4.1彈簧圈數對具預扭角螺旋彈簧自然頻率與模態之影響……………40
4.1.1少圈數具預扭角螺旋彈簧分析……………………………………40
4.1.2多圈數具預扭角圓柱形螺旋彈簧分析……………………………103
4.2矩形剖面長寬比對具預扭角螺旋彈簧自然頻率與模態之影
響……………………………………………………………………130
4.3材料性質對具預扭角螺旋彈簧自然頻率與模態之影響…………133
第五章 結論與建議….…………………………………………………136
參考文獻……………………………………………………………………138

1. W. H. Wittrick , “On elastic wave propagation in helical springs”, International Journal of Mechanical Sciences 8, pp. 25-47(1966).

2. Y. Kagawa, “On the dynamical properties of helical springs of finite length with small pitch”, J. Sound Vib. 8,1(1968).

3. M. F. Massoud, “On the coefficient matrix of a cross-section of a vibrating curved and twisted non-prismatic space thin beam”, International Journal of Mechanical Sciences 12, pp.327-340(1970)

4. J. W. Phillips and G. A. Costello , “Large deflections of impacted helical springs”, J. Acoust. Soc. Am. 51 , pp. 967-973(1972).

5. G. A. Costello, “Radial expansion of impacted helical springs”, J. Appl. Mech. Trans. ASME 42, pp. 789-792 (1975).

6. N. C. Huang ,“Theories of elastic slender curved rods”, J. Appl. Math. Phys. (ZAMP) 24,1-18(1973).

7. S. K. Sinsha and G. A. Costello, “The numerical solution of the dynamic response of helical springs”, IJNME 12, pp. 949-961(1978).

8. J. E. Mottershead , “Finite elements for dynamical analysis of helical rods”, International Journal of Mechanical Sciences 22, pp. 267-283 (1980).

9. L. Della Pietra and S. Della Valle, “On the dynamic behaviour of axially excited helical springs”, Meccanica, 17, pp. 31-43(1982).

10. D. Pearson, “The transfer matrix method for the vibration of compressed helical springs”, Journal of Mechanical Engineering Science 24, pp. 163-171(1986).

11. D. Pearson and W. H. Wittrick, “An exact solution for the vibration of helical springs using a Bernoulli-Euler model”, International Journal of Mechanical Sciences 28, pp. 83-96(1986).
12. Y. Lin. and A. P. Pisano, “General dynamic equations of helical springs with static solution and experimental verification”, ASME J. Appl. Mech. 54, pp. 910-916(1987).

13. V. Haktanir and E. Kiral , “Determination of free vibration frequencies of helical springs by the Myklestad method”, Proc. 4th National Symp. on Machinery Theory, Istanbul, September, pp.479-488(1990).

14. W. Jiang, W. Jones, K. Wu and T. Wang , “Non-linear and linear, static, and dynamic analyses of helical springs”, 1989 Proceeding of the 30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Mobile, pp. 386-395(1989).

15. W. Jiang, W. K. Jones, T. L. Wang and K. H. Wu, “Free vibration of helical springs”, transactions of the ASME 58, pp. 222-228(1991).

16. L. E. Becker and W. L. Cleghorn, “On the buckling of helical compression springs”, International Journal of Mechanical Sciences 34, pp. 275(1992).

17. V. Yildirim , “Investigation of parameters affecting free vibration frequency of helical springs”, International Journal for Numerical Methods in Engineering 39, pp. 99-114(1996).

18. G. G. Chassie, LE. Becker , and WL. Cheghorn, “On the buckling of helical springs under combined compression and torsion”, International Journal for Mechanical Sciences 39, pp. 697-704(1996).

19. V. Yildirim , “Free Vibration analysis of non-cyklindrical coil springs by combined use of the transfer matrix and the complementary functions methods” Communications in Numerical Methods in Engineering

20. Kim. Dojoong, “Development of a finite element program for dynamic analysis of helical springs”, IEEE Mechanics, KORUS’99 , 309-314(1999).

21. L. E. Becker , G. G. Chassie and W. L. Cleghorn, “On the natural frequencies compression springs”, International Journal of Mechanical Sciences 44, pp. 825-841(2002).

22. K. Nagaya, S. Takeda and Y. Nakata , “Free vibration of coil spring of arbitrary shape”, International Journal for Numerical Methods in Engineering 23, pp. 1081-1099(1986).

23. V. Yildirim, “The Myklested method for the free vibration of non-cylindrical helical springs (in Turkish)”, Turkish Journal of Engineering and Environmental Science 20, pp. 121-128(1996).

24. J. N. Reddy ,“ An introduction to the Finite Element Method”, Third Edition., New York：McGraw Hill(2006).

25. V. Yildirim and N. Ince , “ Natural frequencies of helical springs of arbitrary shape”, Journal of Sound and Vibration 204, pp. 311-329(1997).

26. Y.D. Shih, J.K. Chen, Y.C. Chang, J.P. Sheng, “Natural vibration of arbitrary spatially curved rectangular rods with pre-twisted angles” , Journal of Sound and Vibration 285 (2005) 925-939.

27. A.Y.T. Leung, “Vibration of thin pre-twisted helical beams” , International Journal of solids and structures 47 (2010) 1177-1195,

28. 賴俊豪，“圓柱形螺旋彈簧動靜態之有限元素分析”，國立台灣科技大學機械工程研究碩士論文，2006年7月。

29. Mott 編著，黃仁明 編譯，“機械元件設計”，全華科技圖書股份有限公司 印行。

30. 黃主德 主編，林金鎮 陳常成 戴義國 校定，“機械元件設計”，文京圖書股份有限公司，總經銷大揚出版社。

31. Ansel C. Ugural 作者，尤春風 技術審閱，陳建廷 譯者，“機械設計”，麥格羅．希爾 出版集團 臺灣分公司，滄海書局總代理。

32. 江益璋 柯忠和 編譯，“機械設計(上)”，全華科技圖書股份有限公司出版。