本論文旨在探討一個極化分集可調式天線之研製，應用於室內無線區域網路傳輸裝置IEEE802.11n/ac。首先，我們提出一個具有四個槽孔以及一個二極體的環形槽孔天線(Annular Ring Slot Antenna)，此天線經由二極體的狀態以及饋入位置的切換，可以達到四種不同極化的目的，以對應接收端極化未知的情形，且使用在1.6mm的FR4板材(介電常數4.4)，增加實作便利性。本論文提出設計的過程以及方法，天線的參數分析及模擬與量測的比較。
最後在實作與量測的部分，我們將其分為三種情況，一種為固定極化情況，利用理想的開路短路來做驗證其概念是否可行，另一種為有加二極體以及相關的偏壓電路，藉由適當地給予偏壓，我們可以控制二極體的導通與否，來達到切換極化的目的，使得訊號有更多的調變空間，且在二極體的部分會再用TRL確認其二極體的等效模型以及相關校準，最後一種情況為安裝開關IC ，藉由開關IC來切換不同的饋入位置，來完成整個設計。

This thesis presents a reconfigurable antenna with full polarization diversity for indoor WLAN IEEE802.11n/ac applications. First, we proposed the annular ring slot antenna with four small apertures where an aperture is loaded with a diode. By controlling only one diode and the feed line location, the proposed antenna can achieve the full polarization configurations – V-pol, H-pol, RCP, and LCP. The design concept was verified by HFSS simulation and implemented on a 1.6mm thick -FR4 PCB. This thesis provides the design procedures, parameter study, and performance comparison between the simulation and measurement.
Second, we realized the prototypes with three progressive phases. In Phase 1, we used different layouts on the printed antennas to build individual antennas of various fixed polarizations. In Phase 2, we added a diode to one of the small apertures and employed the bias circuit to control between the linear and the circular polarization of a feed line. To achieve better AR of circular polarization, we used the TRL calibration method to extract the accurate circuit parameters of the employed diode. In Phase 3, we added a switch IC for the feed lines of orthogonal orientation to achieve a reconfigurable design of full polarization diversity.

目錄
口試委員會審定書 i
誌謝 ii
中文摘要 iii
Abstract iv
目錄 v
圖目錄 vi
表目錄 ix
第一章 緒論 1
1.1研究動機 1
1.2 無線區域網路 1
1.3天線設計目標 2
1.4 章節架構 3
第二章 天線設計之相關介紹 4
2.1前言 4
2.2 常見圓極化天線 4
2.3 文獻探討 5
第三章 可調式極化之環形槽孔天線設計 7
3.1前言 7
3.2 天線設計與參數分析 8
3.3天線版本1模擬與量測結果 28
3.4結論 43
第四章 偏壓電路與開關之設計與實作 44
4.1前言 44
4.2偏壓電路設計 45
4.3開關整合設計 78
4.4結論 86
第五章USRP量測與驗證 87
5.1前言 87
5.2 USRP儀器簡介 88
5.3 量測架設與結果 90
.第六章 結論 98
參考文獻 100

[1] J. Huang, “A Ka-band circularly polarized high-gain microstrip array antenna,” IEEE Trans. Antennas Propag., vol. 43, pp. 113–116, Jan 1995.
[2] A. Adrian and D.H. Schaubert, “Dual aperture coupled microstrip antenna for dual or circular polarization,” Electron. Lett., vol. 23, pp. 1226–1228, Nov. 1987.
[3] P. Y. Qin, A. R.Weily, Y. J. Guo, and C. H. Liang, “Polarization reconfigurable
U-slot patch antenna,” IEEE Trans. Antennas Propag., vol.58, no. 10, pp. 3383–3388, Oct. 2010
[4] B. Kim, B. Pan, S. Nikolaou, Y.-S. Kim, J. Papapolymerou, and M. M. Tentzeris, “A novel single-feed circular microstrip antenna with reconfigurable polarization capability,” IEEE Trans. Antennas Propagation, vol. 56, no. 3, pp. 630-638, Mar. 2008.
[5] H . Gu, J .Wang , L . Ge,C.-Y. Desmond Sim,“A New Quadri-Polarization Reconfigurable Circular Patch Antenna,” IEEE Access, vol. 4, pp. 4646 – 4651,
Aug. 2016
[6] M. Jusoh, T. Aboufoul, T. Sabapathy, A. Alomainy,M. Kamarudin, “Pattern-reconfigurable microstrip patch antenna with multidirectional beam for WiMAX application,” IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 860–863, Apr. 2014.
[7] R.-Y. Chou, C.-Y. Wu and S.-H. Yeh, “Switchable printed monopole antenna with frequency diversity for WiFi/2.6 GHz WiMAX/3.5 GHz WiMAX applications,” TENCON2007-2007 IEEE Region 10 Conference, pp. 1-3, Oct. 2007.
[8] H. Boudaghi, M. Azarmanesh, and H. Mardani, “Novel frequency reconfigurable microstrip monopole antenna for multi-radio wireless applications,” ICEE, 2012 20th Iranian Conference, pp. 1298-1301, May 2012.

[9] H. Kimouche and A. Mansoul, “A compact reconfigurable single/dual band antenna for wireless communications,” Antennas Propagation (EUCAP), 5th European Conference, pp. 393-396, Apr. 2011.
[10] C.-H. Hu, T.-R. Chen, J.-F. Wu and J.-S. Row, “Reconfigurable microstrip antenna with polarization diversity and frequency agility,” Electronics Letters, vol. 43, no. 24, pp. 1329-1330, Nov. 2007.
[11] Y. J. Sung, “Frequency and polarization configurability from an open-loop square ring antenna,” Microwaves, Antennas Propagation, IET, vol. 6, pp. 505-509, Apr. 2012.
[12] J.-S. Row, W.-L. Liu, T.-R. Chen, “Circular polarization and polarization reconfigurable designs for annular slot antennas,” IEEE Transactions On Antennas And Propagation, vol. 60, no. 12, Dec. 2012
[13] C.-Y. Desmond Sim, Y.-J. Liao, H.-L. Lin ,“Polarization reconfigurable eccentric annular ring slot antenna design,” IEEE Transactions On Antennas And Propagation, vol. 63, no. 9, Sep. 2015
[14] J. S. Row and R. H. Chen, “Reconfigurable slot-coupled microstrip antenna with polarization diversity,” IET Microw. Antennas Propag.,vol. 1, no. 3, pp. 798–802, Jun. 2007.
[15] J. S. Row and J. F. Wu, “Aperture-coupled microstrip antennas with switchable polarization,” IEEE Trans. Antennas Propag., vol. 54, no. 9, pp. 2686–2691, Sep. 2006.
[16]J. F. Wu and J. S. Row, “Broadband circularly-polarised microstrip antenna with switchable polarization sense,” Electron. Lett., vol. 42, no. 24, pp. 1374–1375, Nov. 2006.
[17] Datasheet of SMP1320-079LF
[18] D. M. Pozar, Microwave Engineering, 4th Ed., New York: Wiley, 2012.
[19] Datasheet of SKY13317-373LF, SP3T switch
[20] A. Grau, J. Romeu, M.-J. Lee, S. Blanch, L. Jofre and F. D. Flaviis “A dual-linearly-polarized MEMS-reconfigurable antenna for narrowband MIMO communication systems,” IEEE Transactions On Antennas And Propagation, vol. 58, no. 1, Jan. 2010
[21] P.-Y. Qin, Y. J. Guo, A. R.Weily, and C.-H. Liang, “A Pattern Reconfigurable U-Slot Antenna and Its Applications in MIMO Systems,” IEEE Transactions On Antennas And Propagation, vol. 60, no. 2, Feb. 2012
[22] “NI LabVIEW Communications 2.0” National Instrument(NI)[Online]. Available: http://www.ni.com/zh-tw.html