跳到主要內容

臺灣博碩士論文加值系統

(216.73.216.59) 您好!臺灣時間:2025/10/11 16:58
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:許維修
研究生(外文):Wei-Xiu Xu
論文名稱:摻雜高分子的液晶在圓柱形毛細管內排列特性之探討
論文名稱(外文):Photo-Alignment Method to make Liquid Crystal (LC) Alignment Vertical to Arbitrary Geometrical Substrate
指導教授:陳殿榮
口試委員:徐芝珊吳勛隆吳俊傑
口試日期:2009-07-03
學位類別:碩士
校院名稱:國立臺北科技大學
系所名稱:光電工程系研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2009
畢業學年度:97
語文別:中文
論文頁數:58
中文關鍵詞:液晶垂直配向毛細管
外文關鍵詞:liquid crystalhomeotropically alignedcapillary
相關次數:
  • 被引用被引用:0
  • 點閱點閱:215
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
我們發展一種簡單的光配向方法,利用光可聚合高分子單體混合液晶,製作可使液晶在任意幾何形狀的表面形成垂直配向的元件,並探討光電特性。製作方法是將光可聚合單體以適當的重量百分比攙入液晶中,再將混合物注入空的平行板液晶盒,在照射紫外光後,液晶可在玻璃基板表面形成均勻的垂直排列。藉由此種方法,注入圓柱形毛細管中,在偏光顯微鏡下可觀察到垂直排列圖樣。
本研究中,探討液晶摻雜3種高分子材料包括PolymerA、PolymerC及 PolymerA和PolymerC之混合物在液晶盒與毛細管樣品的配向效果。藉由改變高分子濃度及紫外光照射時間觀察液晶的排列情形。並探討實驗過程中,可能遭遇到的難題。最後將理論預期與偏光顯微鏡下觀察的結果做比較,驗證液晶分子在圓柱型表面垂直配向的結構。
We develop a simple photo-alignment method to make liquid crystal (LC) alignment vertical to arbitrary geometrical surfaces. A minute amount of photocurable monomer was doped to LC. Then the monomer/LC mixture at various concentrations was filled into an empty cell composed of a pair of parallel glass substrates. After illuminating UV light, the polymer network made LC homeotropically aligned in the sample cell. Filling the mixture of the same concentration to a cylindrical capillary, we observed the typical pattern of LC molecules homeotropically aligned in the capillary by the polarizing microscopy.
In the thesis, we prepare three kinds of polymer/LC mixtures in the parallel liquid crystal cell and the cylindrical capillary to study the alignment effect. By varying polymer concentrations and UV exposure time, we observe the liquid crystal alignment in the samples. The homeotropic LC alignment in the parallel cell was confirmed by the conoscopy, while that in the capillary was verified since the optical pattern by polarizing microscopy is the same as the theory prediction.
目 錄

中文摘要 i
英文摘要 ii
誌謝 iii
目錄 iv
表目錄 vi
圖目錄 vii
第一章 緒論 1
第二章 液晶簡介 2
2.1液晶的發現與歷史 2
2.2液晶相的分類 4
2.3依液晶分子排列分類 5
第三章 原理 8
3.1液晶的光配向介紹 8
3.1.1高分子穩定的Bend cell 9
3.2聚光干涉儀介紹 11
3.3 垂直配向的毛細管中的液晶分子排列 13
第四章  實驗方法 15
4.1液晶盒樣本的製作步驟 15
4.2實驗樣品製作流程 17
4.2.1實驗步驟 18
4.3偏光顯微鏡 19
第五章  實驗結果和討論 20
5.1實驗樣本 20
5.2 垂直配向毛細管在偏光顯微鏡下觀察 40
5.3 光配向毛細管反應過程 45
5.4 毛細管缺陷成因 52
第六章  結論 53
第七章  未來展望 .54
參考文獻 55
附錄
A:E7材料參數表 56
B:2009中華民國高分子學會年會 57
參考文獻

[1] Fang Du, Yan-Qing Lu, and Shin-Tson Wu, Appl, Phys. Lett. 85, 2181 (2004).
[2] J. Stöhr et al., Science, 292, 2299 (2001).
[3] O.Yaroshchuk, Yu. Zakrevsky, A.Dobrovolsky, and S Pavlov, Proc. SPIE 4418, 49 (2001).
[4] W. M. Gibbons, P. J. Shannon, S. T. Sun, and B. J. Swetlin, Nature, 351, 49 (1991).
[5] Peter J. Collings and Michael Hird 合著,楊怡寬、郭蘭生及鄭殷立編譯,“液晶化學及物理入門”台北:偉明圖書出版,2001。
[6]松本正一及角田市良合著,劉瑞祥譯,“液晶之基礎與應用”台北:國立編譯館出版。
[7] H. K. M. Vithana and S. M. Faris, SID Int. Symp. Dig. Tech. Papers, p.731 (1997).
[8] K. H. Yang and H. Takaon, J. Appl. Phys. 67, 5 (1990).
[9] K. H. Yang, J. Appl. Phys. 64, 4780 (1988).
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊