跳到主要內容

臺灣博碩士論文加值系統

(216.73.217.68) 您好!臺灣時間:2026/11/20 13:07
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:陳昱達
研究生(外文):Yu-Ta Chen
論文名稱:針對五軸工具磨床A軸與刀具軸誤差量測方法分析
論文名稱(外文):Error Measurement Methods for A-axis and Spindle of Five-axis Grinding Machine Tool
指導教授:劉建聖
指導教授(外文):Chien-Sheng Liu
口試委員:蔡忠佑、謝文馨、陳怡呈
口試委員(外文):Chuang-Yu Tsai、Wen-Hsin Hsieh、Yi-Cheng Chen
口試日期:2015-06-26
學位類別:碩士
校院名稱:國立中正大學
系所名稱:機械工程學系暨研究所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2015
畢業學年度:103
語文別:中文
論文頁數:105
中文關鍵詞:五軸工具磨床、誤差模型、誤差量測
外文關鍵詞:Five-axis grinder machine tool、Error model、Error measurement
相關次數:
  • 被引用被引用:2
  • 點閱點閱:426
  • 評分評分:
  • 下載下載:22
  • 收藏至我的研究室書目清單書目收藏:1
隨著現代製造業的蓬勃發展,精密和超精密加工技術扮演越來越重要的角色,電腦數值控制工具機做為發展高科技產品和尖端工業產品的基礎設備,因應工具機市場的高度競爭與朝向生產高精度工具機且當前對於五軸工具磨床誤差綜合建模與量測技術的研究稍嫌不足,因此,本論文致力於研究五軸工具磨床誤差綜合模型、 軸偏心誤差、 軸與刀具主軸在 方向的偏置誤差量測方法分析,本論文的主要研究內容:
建立五軸工具磨床誤差綜合模型,本論文詳細分析與定義五軸工具磨床各運動軸主要誤差源,進行機台誤差運動學分析,建立誤差運動學方程式,首先利用各軸間的齊次座標矩陣轉換對五軸工具磨床進行幾何誤差建模,基於小誤差理論假設,對誤差綜合模型進行合理的簡化,得出該五軸工具磨床的誤差綜合數學模型,並驗證模型的正確性。
五軸工具磨床A軸與刀具軸誤差量測方法分析,本文利用齊次座標矩陣轉換推導出工具機的功能矩陣與其逆向運動學,再根據五軸工具磨床各軸運動關係轉換成NC數值函數,設計五次不同的量測姿態,進行 軸與刀具主軸在 方向的偏置誤差量測方法分析,驗證理論的可行性。

With the growing development of the modern manufacturing industry, precise and ultra-precise processing technologies are playing an important role in recent years. Computerized numerical control machine tools have become the basic manufacturing equipments in high-tech industry and are being widely used in the factory. In response to the highly competitive market, the machine tools manufacturers will naturally tend to produce highly precise products. Currently there is relatively less research on geometric error modeling and measurement technology of five-axis CNC machine tools. Therefore this thesis focuses on geometric error modeling and the analysis of the measurement method of the eccentricity error of orthogonal rotary axes. The thesis analyzes the geometric error sources and establishes the error motion equations on five-axis CNC grinding machine tools. By using the homogeneous transformation matrix (HTM), this thesis proposes the geometric error model of the five-axis machine tool and verify the validity of the error model.
Also this thesis analyzes the measurement method of the geometric error of A-axis and spindle on the five-axis CNC grinding machine tool. The homogeneous transformation technology is used to get the forward kinematics, the corresponding element of the ability matrix and inverse solution, and then NC data equations are obtained according to the relation of the moving parts on the machine tool. Five different measuring postures are designed to measure the coordinates of the workpiece origin ( 、 、 ) and the active parameters.

摘要 I
ABSTRACT II
目錄 IV
圖目錄 VIII
表目錄 X
符號說明 XI
第一章 緒論 1
1-1研究背景 1
1-2 文獻回顧 4
1-2-1 工具機分析與驗證 4
1-2-2多軸工具機誤差建模 5
1-3研究動機與目的 6
1-4本文架構 8
第二章 基礎理論 10
2-1齊次座標轉換矩陣 10
2-2機台誤差源分析 15
2-3工具機的精度檢驗規範與方法 16
第三章 五軸工具機磨床誤差元素及誤差運動學分析 20
3-1五軸工具機磨床簡介 20
3-2五軸工具機磨床構造與運動關係分析 22
3-2-1五軸工具機磨床構造分析 22
3-2-2五軸工具磨床運動關係分析 23
3-3五軸工具磨床誤差元素 23
3-3-1線性軸的運動誤差元素 24
3-3-2 旋轉軸的運動誤差元素 27
3-4五軸工具機磨床誤差量 30
第四章 五軸工具機磨床綜合誤差模型 34
4-1五軸工具機磨床運動鏈分析 34
4-2五軸工具機磨床座標系設定 35
4-3五軸工具機磨床運動鏈間的齊次座標轉換矩陣 36
4-3 誤差綜合模型的建立 44
4-4小節 47
第五章 五軸工具磨床運動學分析 49
5-1五軸工具機磨床座標系建立 50
5-2 五軸工具機磨床之正向運動學 51
5-3 五軸工具機逆向運動學 54
5-4 小節 56
第六章 五軸工具磨床NC數值函數 58
6-1五軸工具機磨床之初始偏置量 58
6-2五軸工具磨床NC數值函數 63
6-3小節 64
第七章 主動參數與工件原點之量測 66
7-1第一次量測 70
7-2第二次量測 71
7-3第三次量測 72
7-4第四次量測 75
7-5第五次量測 77
7-6求解A軸偏心誤差,刀具軸與A軸在Z方向上的偏置量 78
7-7小節 79
第八章 結論與未來展望 81
8-1結論 81
8-2未來展望 83
附錄(一) 85
附錄(二) 88
參考文獻 89



[1]葉立綸等,2013機械產業年鑑,工研院IEK,2013年7月。
[2]http://mymkc.com/
[3]D. L. Leete, “Automatic compensation of alignment errors in machine tools,” Int. J. Mach. Tool. Manu. , vol. 1, pp. 293-324, 1961.
[4]T. C. Austin, J. Denavit, and R. S. Hartenberg, “Analysis of Errors in the Double Hooke Joint,” ASME J. Eng. Ind., Series B, vol. 87, pp. 251-257, 1965.
[5]J. Denavit and R. S. Hartenberg, “A Kinematic Notation for Lower Pair Mechanisms Based on Matrices,” ASME J. Appl. Mech., vol. 22, pp. 215-221, 1955.
[6]R. S. Hartenberg and J. Denavit, Kinematic Synthesis of linkages, McGraw-Hill, New York, 1964.
[7]P. D. Lin, “Modeling for Error Analysis of Cam Mechanisms by Using 4x4 homogeneous Transformation Matrix,” Math. Comput. Model., vol. 19, pp. 33-42, 1994.
[8]P. D. Lin and M. B. Chu, “Machine Tool Settings for Manufacturing of Cams with flat-face Followers,” Int. J. Mach. Tool. Manu., vol. 34, pp1119-1131, 1994.
[9]P. D. Lin and C. S. Tzeng, “New Method for Determination of the Pose of the Grinding Wheel for Thinning Dill Points,” Int. J. Mach. Tool. Manu., vol. 47, pp. 2218-2229, 2007.
[10]C. Y. Tsai and P. D. Lin, “The mathematical models of the basic entities of multi-axis serial orthogonal machine tools using a modified Denavit-Hartenberg notation,” Int. J. Adv. Manuf. Technol., vol. 42, pp. 1016-1024, 2009.
[11]曾乾生,“Ewag六軸CNC工具磨床之研究” 國立成功大學機械研究所,碩士論文,2002。
[12]林俊佑,“四軸半工具機的分析與驗證” 國立成功大學機械研究所,碩士論文,2010。
[13]王金圓,“五軸數控機床誤差建模分析” 瀋陽工業大學,碩士論文,2012。
[14]張瑩,“加工中心輪廓誤差預測前饋補償技術研究” 西安理工大學,碩士論文,2007。
[15]W. J. Love and A. J. Scarr, “Determination of the volumetric accuracy of multi-axes machine,” Proceedings of the 14th International M. T. D. R. Conference, vol. 14, pp. 307-315, 1973.
[16]P. D. Lin and K. F. Ehmann, “Direct volumetric error evaluation for multi-axis machines,” Int. J. Mach. Tools. Manuf., vol. 5(33), pp. 675-693, 1993.
[17]M. Rahman, J. Heikkala and K. lappalainen, “Modeling, measurement and error compensation of multi-ax is machine tool. Part I: theory,” Int. J. Mach. Tool. Manu., vol. 40, pp. 1535–1546, 2000.
[18]V. S. B. Kiridena and P. M. Ferreira, “Kinematic modeling of quasi static errors of three-axis machining centers,” Int. J. Mach. Tool. Manu., vol. 1(34), pp. 85-100, 1994.
[19]V. S. B. Kiridena and P. M. Ferreira, ”Parameter estimation and model verification of first order quasi static error model for three-axis machining centers,” Int. J. Mach. Tool. Manu., vol. 1(34), pp. 101-125, 1994.
[20]楊建國,“數控機床誤差綜合補償技術及應用” 上海交通大學,博士論文1998。
[21]楊建國,潘志宏,薛秉源,“數控機床幾何和熱誤差綜合的運動學建模” 機械設計與製造,1998。
[22]楊建國,潘志宏,薛秉源,“數控雙主軸車床幾何和熱誤差綜合數學模型及實時補償” 機械設計與研究,1998。
[23]楊建國,“數控機床誤差綜合補償技術及應用” 上海交通大學,博士論文,1998。
[24]倪軍,“數控機床誤差補償研究的回顧與展望” 中國機械工程學會,1997。
[25]J. D. Foley, A. V. Dam, S. K. Feiner and J. F. Hughes, Computer Graphics Principles and Practices, Addision-Wesley Publishing Company, 1981.
[26]C. H. Wu, “Robot Accuracy Analysis Based on Kinematics,” IEEE J. Rob. Autom., vol. 2, pp. 171-179, 1986.
[27]R. P. Paul, Robot Manipulators-Mathematics, Programming and Control, MIT press, Cambridge, Mass, 1982.
[28]J. Denavit and R. S. Hartenberg, “A Kinematic Notation for Lower Pair Mechanisms Based on Matrices,” J. Appl. Mech.-Trans. ASME, vol. 22, pp. 215-221, 1955.
[29]J. J. Uicker, “On the Dynamic Analysis of Spatial Linkages Using 4x4 Matrices,” Dissertation for Doctor of Philosophy, Northwestern University, Evanston, ILL., Aug. 1965.
[30]蔡忠佑,“鏡成像位姿變化及成像位移之分析、建模與設計” 成功大學機械系博士論文,2007.
[31]陳俊仁“使用雷射四象限儀檢測精密機具性能” 成功大學機械系,碩士論文,2003。
[32]王靖霈,“三軸工具機誤差分析及量測” 成功大學機械系,碩士論文,2002。
[33]廖明毅,“以DBB量測及校正五軸工具機之幾何誤差” 清華大學動力機械工程研究所,碩士論文,2002。
[34]林威辰,“工具機單線性軸六自由度量測系統之設計” 中正大學機械系,碩士論文,2014。
[35]盛伯浩,“數控機床誤差的綜合動態補償技術”,製造技術與機床,1997。
[36]李聖怡,戴一帆,尹自強,鄭子文,王貴林,彭小強,精密和超精密機精度建模技術,國防科技大學,湖南長沙。
[37]ISO 230-1, Acceptance Code for Machine Tools, Part 1: Geometric Accuracy of Machine Operating Under No-load or Under Finishing Conditions, International Standard, 1996.
[38]ISO 230-2, Acceptance Code for Machine Tools, Part 2: Determination of Accuracy and Repeatability of Position of Numerically Controlled Machine Tools, International Standard, 1997.
[39]ISO 230-3, Acceptance Code for Machine Tools, Part 3: Evaluation of Thermal Effects, International Standard, 1988.
[40]ISO 230-4, Acceptance Code for Machine Tools, Part 4: Circular Measurements, International Standard, 1996.
[41]GB/T 17421.1,機床檢驗通則,第一部分:在無負荷或精加工條件下機床的幾何精度,中華人民共和國國家標準,1998。
[42]GB/T 17421.2,機床檢驗通則,第二部分:數控軸線的定位精度和重覆定位精度的確定,中華人民共和國國家標準,2000。
[43]雷射干涉儀操作手冊,明江貿易股份有限公司,2012。
[44]GB/T 17421.4,機床檢驗通則,第四部分:數控機床的圓檢驗,中華人民共和國國家標準,2003。
[45]http://www.renishaw.com.tw/tw/
[46]http://www.liebherr.com/
[47]蔣岳峰,“五軸CNC成形砂輪磨齒機數學模式之研究”,台灣科技大學,碩士論文,2011。
[48]Akihide Kimura, Wei Gao and Zeng Lijiang,“Position and out-of-straightness measurement of a precision linear air-bearing stage by using a two-degree-of-freedom linear encoder,” Meas. Sci. Technol., Vol. 21, pp. 1-10, 2010.
[49]ISO 230-7, Test code for machine tools- Part7: Geometric accuracy of axes of rotation, 2006
[50]D. French, S. H. Humphries, “Compensation for backlash and alignment errors in a numerically controlled machine tool by a digital computer program,” Proceedings of the 8th International M. T. D. R. Conference, pp. 707-726, 1967.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top