跳到主要內容

臺灣博碩士論文加值系統

(216.73.217.68) 您好!臺灣時間:2026/11/20 13:07
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:張欽宇
研究生(外文):Chin-yu Chang
論文名稱:五軸CNC成形砂輪磨齒機NC路徑模擬與碰撞檢測
論文名稱(外文):NC PATH SIMULATION AND COLLISION DETECTION BASED ON THE FIVE-AXIS CNC GEAR PROFILE GRINDING MACHINE
指導教授:石伊蓓
指導教授(外文):Yi-pei Shih
口試委員:石伊蓓
口試日期:2011-07-01
學位類別:碩士
校院名稱:國立臺灣科技大學
系所名稱:機械工程系
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2011
畢業學年度:99
語文別:中文
論文頁數:79
中文關鍵詞:成形砂輪磨齒機、NC碼轉譯、三維體素、碰撞檢測
外文關鍵詞:CNC gear profile grinding machine、NC Complier、Volume pixel、Collision Detection
相關次數:
  • 被引用被引用:15
  • 點閱點閱:780
  • 評分評分:
  • 下載下載:191
  • 收藏至我的研究室書目清單書目收藏:0
為提高大直徑圓柱齒輪精度,一般使用成形砂輪研磨加工,現有的成形砂輪磨齒機為五軸CNC同動,可實施包含修砂、磨削和線上量測三種工序。此類機台運動較為複雜,精密度高且價格昂貴,一旦撞機,不僅工件報廢,夾治具撞傷,嚴重者則可能造成機械損壞,其維修費用非常高。為防撞機,一般在加工前會執行空跑以測試NC路徑是否正確,由於工序較為複雜,所需的測試時間長,此時機台無法投入生產因而影響生產效率。有鑑於此,本研究建立三維虛擬實境之模擬系統,以方便使用者模擬規劃之NC路徑。此模擬系統不僅可以節省機台空跑的時間,並可避免撞機發生。
本研究利用Visual Basic 2008做為開發平台,以OpenGL圖形庫為三維圖形顯示基礎,研發成形砂輪磨齒機之三維虛擬實境NC路徑模擬與碰撞檢測系統。建立之模擬系統主要分為三大部份(1)NC碼轉譯功能、(2)三維體素(Voxel)建立功能以及(3)碰撞檢測功能。
In order to improve the precision of the cylindrical gear with large-size diameter, the cylindrical gear is grinding by profile grinding wheel. There are three processes of existing simultaneous five-axis CNC gear profile grinding machine, which including dressing, grinding, and on-machine measurement. The motion of this machine is more complicated, and its precision and price are high. Once the collision of machine happens, the workpiece is declared no longer useable and the clamping fixture is damaged. Critically, the charge of the repair for the damage of machine is expensive. In order to avoid the collision of machine, dry run is implemented to test whether the NC path is correct or not before actual manufacturing. Because of the complicated process, it needs to take long time for testing. At this time, the machine is idle and the production efficiency is reduced. Having this in mind, we develop the 3-D virtual reality simulation system in this study to easily simulate the NC path which the user had planned. It’s not only saves the time for dry run, but also avoids the collision of machine.
We use Visual basic 2008 as the developing platform in this study, and the 3-D graphical library of OpenGL as the foundation of graph showing to develop the 3-D virtual reality NC path simulation and collision detection system. The simulation system is divided into three parts: (1) the complier of NC code, (2) the building of 3-D volume pixel, and (3) the detection of collision.
中文摘要 I
Abstract II
誌 謝 III
目 錄 IV
符號索引 VI
圖索引 VIII
表索引 XI
第一章 緒論 1
1.1 前言 1
1.2 研究動機與目的 2
1.3 文獻回顧 3
1.3.1 NC碼轉譯 3
1.3.2 體素建立 4
1.3.3 碰撞檢測 7
1.4 論文架構 8
第二章 五軸CNC成形砂輪磨齒機三維模型與座標系統建立 9
2.1 前言 9
2.2 三維零件STL檔案格式 9
2.3 機台各零件相對於機械原點的座標轉換矩陣 11
2.3.1 零件運動座標轉換矩陣與運動方程式的定義 11
2.3.2 程式原點定義 21
2.4 小結 25
第三章 NC碼轉譯器 26
3.1 前言 26
3.2 轉譯器 26
3.2.1 轉譯器概述 26
3.2.2 法那科控制器的語句命令 26
3.3 NC碼轉譯器編譯方法 30
3.3.1 轉譯器架構 30
3.3.2 初始處理模組 31
3.3.3 語法拆解模組 32
3.3.4 變數計算模組 33
3.3.5 G/M碼命令模組 36
3.3.6 依速度之差補點點數計算方法 37
3.4 小結 38
第四章 零件之體素邊界體建立與碰撞檢測 39
4.1 前言 39
4.2 碰撞檢測架構 39
4.3 八元樹Octree 40
4.4 程式產生之零件模型 41
4.4.1 軸對稱的三角面模型建立 42
4.4.2 工件齒輪三角面模型的建立 45
4.5 三角面模型轉換成體素邊界體模型 49
4.6 體素邊界體快速碰撞測試 57
4.6.1 邊界體定義 58
4.6.2 邊界體碰撞測試種類 58
4.6.3 快速碰撞測試 60
4.7 小結 65
第五章 NC碼模擬與碰撞檢測範例 66
5.1 前言 66
5.2 程式功能與使用流程 66
5.3 碰撞模擬 68
5.3.1 範例一:使用探頭碰出一個張字 68
5.3.2 範例二:量測齒輪時因沒有提刀產生的碰撞 71
5.3.3 範例三:研磨齒輪路徑模擬與修砂路徑模擬 72
5.4 小結 74
第六章 結論與建議 75
6.1 結論 75
6.2 建議與未來展望 76
參考文獻 77
作者簡介 79
[1]H. S. Yan, Creative Design of Mechanical Devices, Springer, Singapore (1998).
[2]S. Gottschalk, M. C. Lin and D. Manocha, OBBTree: A hierarchical structure for rapid interference detection, ACM SIGGRAPH (1996).
[3]Bergen Gino Van Den, Efficient Collision Detection of Complex Deformable Models Using AABB Trees,Journal of Gaphics Tools archive Vol. 2 Issue 4 (1998) 1-13.
[4]D. Eberly, Dynamic Collision Detection using Oriented Bounding Boxes,Geometric Tools (1999).
[5]C.K. Chan, S.T. Tan,Determination of the Minimum Bounding Box of an Arbitrary Solid: an Iterative Approach,Computers and Structures (79) (2001) 1433-1449.
[6]D. L. James and D. K. Pai, BD-Tree:Output-Sensitive Collision Detection for Reduced Deformable Models, ACM Transactions on Graphics Vol. 23 No. 3 (2004) 393-398.
[7]Oren Tropp, A Fast Triangle-Triangle Intersection Test, Computer Animation And Virtual Worlds (2005).
[8]M. Inui and A. Ohta, Using a GPU to Accelerate Die and Mold Fabrication, IEEE Computer Graphics and Applications 21(1) (2007) 82-88.
[9]W. Zhang, X. Peng, M. C. Leu and W. Zhang, A novel contour generation algorithm for surface reconstruction from dexel data, ASME Journal of Computing and Information Science in Engineering 7(3) (2007) 203-210.
[10]林秉毅,車銑複合五軸工具機之 PC-based CNC 即時系統設計與實現,國立成功大學碩士論文,2003。
[11]吳稚逸,基於STEP-NC之五軸曲面加工,國立清華大學碩士論文,2004。
[12]劉原呈,三軸CGT工具機之碰撞偵測,國立中正大學碩士論文,2005。
[13]蔡孟杰,適應性3D模型應用於多軸模擬與虛擬雕刻系統,國立中正大學碩士論文,2006。
[14]洪榮星,六軸CNC加工機之運動學與碰撞分析及模擬,國立中正大學碩士論文,2006。
[15]楊澐鈞,五軸工具機實體切削模擬,國立台灣大學碩士論文,2008。
[16]楊勝群,VERICUT數控加工仿真技術,清華大學出版社,北京,2010。
[17]大新資訊,OpenGL超級手冊第二版,碁峰資訊,台北市,2000。
[18]冬陽,3D遊戲程式設計/基礎篇,宸宇,台北縣新莊市,2003。
[19]Alfred V. Aho,編譯系統設計,碁峰資訊,2006。
[20]廖榮貴等,資料結構與演算法-使用VB、VB2005,文魁資訊股份有限公司,台北市,2007。
[21]法那科公司,法那科系列控制器操作手冊。
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
1. 江大樹(2003),〈台灣政黨輪替後的政府再造工程:續階改革或第二波寧靜革命〉,《東吳政治學報》,16期,頁27~48。
2. 江岷欽(1998),〈政府再造的五希策略〉,《研考雙月刊》,22卷4期,頁19~30。
3. 江明修、蔡金火(1996),〈王雲五委員會初探:兼論其對當前行政改革之啟示〉,《空大行政學報》,6 期,頁137~168。
4. 江岷欽(1999),〈政府再造的省思〉,《游於藝雙月刊》,15 期,第04版。
5. 江岷欽(1996),〈企業型政府新銓〉,《理論與政策》,12卷2期,頁 63~82。
6. 朱楠賢(1992),〈從組織重組觀點論行政院組織設計之研究〉,《中國行政》,51期,頁71~95。
7. 朱愛群(2005),〈從行政院組織法修正草案-論部會調整之原理、門檻及其要件〉,《考銓季刊》,第41 期,頁65~66。
8. 朱武獻(2006),〈政府改造現況與展望〉,《日新月刊》,第6期,頁172~189。
9. 何鴻榮(1997),〈行政重組的成因和原則之解析─兼論行政院組織法修訂的動力和應有的方向〉,《立法院院聞》,25卷1期,頁65~81。
10. 江明修(1996b),〈再造社群政府〉,《理論與政策》,12卷2期,頁36~62。
11. 江明修、蔡金火、梅高文(1998),〈第三波政府再造之道(上)〉,《人事管理》,35卷12期,頁4~20。
12. 江明修、蔡金火、梅高文(1999),〈第三波政府再造之道(下)〉,《人事管理》,35卷12期,頁22~36。
13. 江明修(1996a),〈我國行政革新的觀念與省察〉,《考銓季刊》,5期,頁40~52。
14. 江岷欽、劉坤億(1997),〈企業型政府的省思--從美國行政革新經驗談起〉,《人事月刊》,25卷第4期,頁34~45 。
15. 吳再居(2004),〈行政院組織變革之歷史回顧〉,《研考雙月刊》,28卷6期,頁39~54。