臺灣博碩士論文加值系統

本文改良設計並製造一套送料裝置，它可用來連續且平順地輸送小圓桿至CNC複合車銑床以進行加工。待處理之小圓桿的兩端具有不同的形狀，而該送料裝置之主要功能為，它必須能將存放於送料斗內之大量且雜亂無序的小圓桿加以整列、調整方向，然後運送至特定的加工位置。在應用型態學矩陣來求得一些可行的送料裝置以後，再將其中之最佳解製造成原型機以進行檢測，測試結果顯示該原型機確實可滿足指定的各項要求。

A feeding device is designed and manufactured to feed a CNC lathe and milling machine with small rods continuously and smoothly. The small rods to be handled have different shapes at its two ends. Large amount of the rods are initially disordered in a hopper, and the desired feeding devices must have the ability to unscramble, orientate, and convey them to the working position precisely. Possible solutions of the feeding devices are determined by using the morphological chart analysis method. A prototype of the best solution is then built for verifying its ability, and the experiments show that it is satisfactory to the design requirements.

致 謝 ......................... I
摘要.......................... II
ABSTRACT .................... III
目 錄..........................IV
圖 目 錄.......................VI
表 目 錄.......................IX
第一章 前言.....................1
1-1文獻回顧與相關研究.............2
1.1.1進料機構之文獻回顧..... .....2
1.1.2市面上進料機構之種類.........5
1-2研究動機與目的................8
1-3論文架構.....................8
第二章 進料裝置.................10
2-1基本構成....................10
2-2進料裝置動作流程..............17
2-3組成裝置之功能分析............18
2.3.1進料裝置之功能結構圖.........18
2.3.2次分功能之分析.............20
2-4目前遭遇問題描述..............28
2.4.1個別問題描述...............28
2-5改善之目標...................33
第三章 新式進料裝置之設計.........35
3-1型態學矩陣求解...............35
3.1.1設計結果之評選.............39
3-2新式進料裝置之細部設計........41
3.2.1自動整列與定向裝置之設計.....41
3.2.2分離裝置的改良.............44
3.2.3輔助定向裝置...............48
第四章 進料機構的製作與測試........50
4-1手動測試....................50
4-2空轉測試....................51
4-3上機實測....................54
4-4結果分析....................54
4.4.1構造方面..................54
4.4.2警報次數..................57
4.4.3成本比較..................58
第五章 結論與建議................59
參考文獻.......................60
自述..........................62

[1]Thomas Robins,”Conveyer-belt”,1906, U.S. Patent No. US981312.
[2]Boyer Harold E,1972,”Vacuum conveyor belt with air bearing”, U.S. Patent No. US3889801A.
[3]Mario T. Sgriccia,1950,” Feeder Bowl”, U.S. Patent No. US2654465,1950.
[4]Robert S. Molique,1977,”Vibratory though part feeder”, U.S. Patent No. US4000807.
[5]Kyle Aldrich Lester,1928,”Rotary feeder”, U.S. Patent No. US1747809.
[6]Francois G. Grandemange,1980,”Device for the transfer of long products particularly bars or
tubes”, U.S. Patent No. US4383604A.
[7]Philip S. Anderson, Kurt H. Hoppmann,Werner H. Schmitt, Charles Vaughn,1992,”Linear feeder”, U.S.
Patent No. US 5236077A.
[8]程泰機械，棒材輸送機-http://www.goodwaycnc.com/exhtml_goodway/goodway_tw/automation/turning/bar_feeders/index.htm
[9]程泰機械，材輸送機工作原理- http://www.goodwaycnc.com/exhtml_goodway/goodway_tw/automation/turning/bar_feeders/index.htm
[10]程泰機械，門型輸送機- http://www.goodwaycnc.com/exhtml_goodway/goodway_tw/automation/turning/gantry_loading/index.htm

[11]程泰機械，自動化上下料- http://www.goodwaycnc.com/exhtml_goodway/goodway_tw/automation/turning/loading_unloading/index.htm
[12] Pahl, G.,and Beitz, W.,1988,Engineer Design-A Systematic Approach,Spring-Verlag.
[13]Zwicky, F.,1967,"The Morphological Approach to Discovery, Invention, Research and Construction", New Method of Thought and Procedure: sysposium on
Methodologies,Pasadena,pp.316-317.
[14]Chen,S.Y.,2005,"A Case-based Shape Conceptualization System for Support Creative Product Design", to be published in Jurnal of Engineering Design.
[15]王龍祥譯，1978，零件輸送圖集，自動化叢書。
[16]江雨龍編譯，1989，自動化機械設計，全華科技圖書。
[17]本社編輯部編譯，1989，最新自動化機構圖集，夫子出版社。
[18] 吳學良，2007，重力式單軌IC測試分類機之創新設計，國立中山大學機械與機電工程學系碩士在職專班。