跳到主要內容

臺灣博碩士論文加值系統

(216.73.216.191) 您好!臺灣時間:2026/11/19 18:18
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:林棋樺
研究生(外文):Chi-hua Lin
論文名稱:應用於薄膜電晶體液晶顯示器驅動電路之設計
論文名稱(外文):Driver Circuits Design for TFT-LCD Display
指導教授:吳錦川 
指導教授(外文):Prof.Jiin-Chuan Wu
學位類別:碩士
校院名稱:國立交通大學
系所名稱:電子工程系所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
畢業學年度:92
語文別:英文
論文頁數:75
中文關鍵詞:薄膜電晶體、驅動電路
外文關鍵詞:TFT-LCD Data Driver、Driver Circuits
相關次數:
  • 被引用被引用:0
  • 點閱點閱:1143
  • 評分評分:
  • 下載下載:1
  • 收藏至我的研究室書目清單書目收藏:0
本篇論文的目標是設計應用在液晶顯示器的驅動電路,並且探討能夠達到快速充放電、高解析度、低飄移電壓以及低功率的可能性。液晶顯示器的驅動電路可分為閘級驅動電路和源級驅動電路;閘級驅動電路是由移位暫存器、電位轉換器和輸出緩衝器組成,而源級驅動電路則是由移位暫存器、閂鎖器、電位轉換器、數位對類比轉換器和輸出緩衝器所組成。
要達到快速充放電的目標,我們採用了有快速充放電、超低靜態電流特色的B類緩衝器架構。由於隨著解析度的提升,相對的源級驅動器的輸出緩衝器準確度更顯的重要,因此本論文主要的重點在於設計出一個低飄移電壓的源級驅動器,而為了達到此目標我們運用了chopper offset cancellation技巧,把飄移電壓壓到最小。在高解析度方面,我們實作了一個10位元解析度數位對類比轉換器,架構則是採用Voltage scaling架構,有面積小的優點。
另外在低功率消耗方面,我們設計了電荷共享的電路,half recycling可節省二分之一動態功率,而triple charge recycling可節省三分之二的動態功率。以上電路皆在0.35μm CMOS製程中試製晶片。
In this thesis, we focus on the driver circuits design for TFT-LCD display, and the possibility of high slew-rate, high-resolution, low-offset-voltage, and low power consumption is discussed. The driver circuits of LCD are composed of two parts, the gate driver and the data driver. Gate driver consists of shift registers, level shifters, and output buffers. Data driver is composed of shift register, level shifter, latch, digital to analog converter, and output buffers.
In order to achieve high slew-rate performance, a class-B buffer which is capable of high slew-rate and extremely low statistic current has been proposed. As the resolution bits become higher, the accuracy of the output buffer becomes more and more important. In this thesis, chopper offset cancellation techniques to reduce input offset voltage has been achieved. For high resolution, a 10-bit digital to analog converter with voltage scaling architecture and small layout area has been implemented.
In addition, charge recycling circuits has been introduced to reduce more power consumption. Half recycling can reduce about 1/2 dynamic power, where Triple charge recycling can reduce about 2/3 dynamic power. All of the above circuits has been designed and fabricated in a 0.35 μm CMOS process.
CONTENTS……………………………………………………i
TABLE CAPTION……………………………………………v
FIGURE CAPTIONS…………………………………...……vi

CHAPTER 1 INTRODUCTION………………….…………1
1.1 Motivation…………………………………………..1
1.2 Thesis Organization…………………………...……2

CHAPTER 2 LIQUID CRYSTAL DISPLAY……………….3
2.1 Liquid Crystal Display Structure…………...………3
2.1.1 Introduction to Liquid Crystal………………….3
2.1.2 Passive/Active Matrix LCD…………………….5
2.1.3 Pixel Structure of TFT-LCD……………………6
2.1.4 Structure of LCD Panel…………………………8
2.2 TFT-LCD Driving Method…………………………9
2.2.1 Inversion Driving Method…………………...…9
2.2.2 Direct Driving and AC Modulation Driving…..10
2.3 Periphery Driver Circuits……………………...…..11
2.3.1 Scan Driver…………………...……………….12
2.3.2 Data Driver……………………………………13

CHAPTER 3 OUTPUT BUFFERS FOR DATA
DRIVER……………………………………...15
3.1 Design Consideration of OP-AMP for AMLCD….15
3.2 Unity-Gain Voltage Buffers……………………….18
3.2.1 Unity-Gain Voltage Buffers…………….……..18
3.2.2 Input/Output Rail-to-Rail Operational
Amplifier………………………………………19
3.2.3 High-Speed Operational Amplifier……………19
3.2.4 Class-B Buffer……………………………...…21
3.3 High-Speed Class-B Buffer……………………….21
3.4 Amplifier with Chopper Techniques………………26
3.5 High-Speed Low-Offset-Voltage Class-B Buffer with
Chopper Techniques………………………………27
3.6 Simulation Results………………………………...29
3.6.1 Simulation Results of High-Speed Class-B
Buffer………………………………………….29
3.6.2 Simulation Results of Low-Offset-Voltage
Class-B Buffer with Chopper Techniques…….35
CHAPTER 4 DIGITAL TO ANALOG CONVERTER AND CHARGE RECYCLING FOR DATA
DRIVER……………………………….….....37
4.1 Gamma Correction………………………………...37
4.2 Digital to Analog Converter……………………….37
4.2.1 Voltage Scaling DAC………………………….38
4.2.2 Charge Scaling DAC………………………….40
4.2.3 Time Scaling DAC…………………………….42
4.3 Low Power Design Consideration……………...…44
4.3.1 Half Charge Recycling………………………...45
4.3.2 Triple Charge Recycling………………………46

CHAPTER 5 CIRCUIT LAYOUT AND MEASUREMENT
RESULTS…………………………………..49
5.1 Layout Considerations…………………………...49
5.2 Measurement Results………………………………53
5.2.1 Class-B Buffer………………………………..55
5.2.2 Class-B Buffer with Chopper Techniques…....58
5.2.3 Two buffers without charge recycling………..60
5.2.4 Half charge recycling…………………………65
5.2.5 Triple charge recycling…………………...…..66
5.2.6 10-bit Digital to Analog Converter…………...68

CHAPTER 6 CONCLUSIONS AND FUTURE
WORKS………………………………………71
6.1 Conclusions………………………………………..71
6.2 Future Works………………………………………72

REFERENCES…………………………………………….73
VITA…………………………………………………….75
[1] E. Lueder, Liquid Crystal Display, John Wiley & Sons, Inc., 2001. (ISBN: 0-471-49029-6).
[2] 那野比古著/陳連春譯, 什麼是液晶, 建興出版社, 民89. (ISBN: 9-578-17396-2).
[3] Wen-Hsia Kung, “Design on Driver Circuits for TFT-LCD Display,” Department of Electronics Engineering & Institute of Electronics, National Chiao-Tung University, 2002.
[4] AUO website, Technology [TFT-LCD Introduction], AU Optronics Corporation, Taiwan, 2004.
[5] Wei-Jen Hsu, “Design of Driving Circuits for LCD in LTPS Technology,” Department of Electronics Engineering & Institute of Electronics, National Chiao-Tung University, 2003.
[6] “ : 384-output TFT-LCD source driver (compatible with 256-gray scales),” Document No. S14791EJ1V0DS00, NEC Corporation, Japan, Feb. 2000.
[7] Ron Hogervorst, John P. Tero, Ruud G.. H. Eschauzier, and Johan H. Huijsing, “A Compact Power-Efficient 3V CMOS Rail-to-Rail Input/Output Operational Amplifier for VLSI Cell Libraries,” IEEE Journal of Solid-State Circuits, vol.29, no.12, pp.1505-1513, December 1994.
[8] Chin-Wen Lu and Chung Len Lee, “A low-power high speed class-AB buffer amplifier for flat-panel-display application,” IEEE Trans. VLSI Systems, vol. 10, no. 2, Apr. 2002.

[9] Chin-Wen Lu, “A low power high speed class-AB buffer amplifier for flat panel display signal driver application,” in SID 2002 Dig., May 2002, pp.281-283.
[10] Tetsuro Itakura and Hironori Minamizaki. “ 10 A quiescent current op-amp design for LCD driver ICs,” IEICE Trans. Fundamentals, vol. E81-A, no. 2, Feb. 1998.
[11] Pang-Cheng Yu and Jiin-Chuan Wu, “A class-B output buffer for flat-panel-display column driver,” IEEE J. Solid-State Circuits, vol. 34, no. 1, Jan. 1999.
[12] Ming-Chan Weng and Jiin-Chuan Wu, “A compact low-power rail-to-rail class-B buffer for LCD column driver,” IEICE Trans. Electron., vol. E85-C, no. 8, Aug. 2002.
[13] Kuo-Jen Hsu, “A High-Speed Low-Power Rail-to-Rail Column Driver for AMLCD Application”, Department of Electrical Engineering, National Chi Nan University, 2003.
[14] Christian C. Enz, Member, IEEE, and GABOR C. TEMES, Fellow, IEEE, “Circuit Techniques for Reducing the Effects of Op-Amp Imperfections: Autozeroing, Correlated Double Sampling, and Chopper Stabilization,” Proceedings of The IEEE, vol. 84, no. 11, Nov. 1996.
[15] Anton Bakker, Kevin Thiele, and Johan H. Huijsing, “A CMOS Nested-Chopper Instrumentation Amplifier with 100-nV Offset,” IEEE Journal of Solid-State Circuits, vol. 35, no. 12, December 2000.
[16] Jan M. Rabaey, Digital Integrated Circuits, Prentice Hall, Inc. 1996. (ISBN: 0-13-178609-1).
電子全文 電子全文(限國圖所屬電腦使用)
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top