|
[1]李百祺(2000),醫用超音波原理. [2]Degertekin, F. L., Guldiken, R. O., & Karaman, M. (2006). Annular-ring CMUT arrays for forward-looking IVUS: transducer characterization and imaging.Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on,53(2), pp.474-482. [3]Caronti, A., Caliano, G., Carotenuto, R., Savoia, A., Pappalardo, M., Cianci, E., & Foglietti, V. (2006). Capacitive micromachined ultrasonic transducer (CMUT) arrays for medical imaging. Microelectronics journal, 37(8), pp.770-777. [4]Cianci, E., Schina, A., Minotti, A., Quaresima, S., & Foglietti, V. (2006). Dual frequency PECVD silicon nitride for fabrication of CMUTs’ membranes. Sensors and Actuators A: Physical, 127(1), pp.80-87. [5]Tanaka, H., Machida, S., Hashiba, K., & Kobayashi, T. (2009). Acoustic characteristics of CMUT with rectangular membranes caused by higher order modes. IEEE Ultrasonics Symposium (IUS), pp. 434-437. [6]Doody, C. B., Cheng, X., Rich, C. A., Lemmerhirt, D. F., & White, R. D. (2011). Modeling and characterization of CMOS-fabricated capacitive micromachined ultrasound transducers. Microelectromechanical Systems, Journal of, 20(1), pp. 104-118. [7]Tang, P. K., Wang, P. H., Li, M. L., & Lu, M. S. (2011). Design and characterization of the immersion-type capacitive ultrasonic sensors fabricated in a CMOS process. Journal of Micromechanics and Microengineering, 21(2), art. no.025013. [8]Tien, Y. S., Ku, P. C., Lin, F. Y., Li, P. C., Lu, L. H., Kuo, P. L., & Tian, W. C. (2012). A low voltage CMOS-based capacitive micromachined ultrasonic sensors development. IEEE Sensors, pp.1-4. [9] Kuhl, W., Schodder, G. R., & Schroder, F. K. (1954). Condenser transmitters and microphones with solid dielectric for airborne ultrasonics. Acustica, 4(5), pp. 519-532. [10]Cantrell, J. H., Heyman, J. S., Yost, W. T., Torbett, M. A., & Breazeale, M. A. (1979). Broadband electrostatic acoustic transducer for ultrasonic measurements in liquids. Review of Scientific Instruments, 50(1), pp.31-33. [11]Haller, M. I., & Khuri-Yakub, B. T. (1996). A surface micromachined electrostatic ultrasonic air transducer. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 43(1), pp. 1-6. [12]Hochman, M., Zahorian, J., Satir, S., Gurun, G., Xu, T., Karaman, M., ... & Degertekin, F. L. (2010). CMUT-on-CMOS for forward-looking IVUS: Improved fabrication and real-time imaging. IEEE Ultrasonics Symposium (IUS), pp. 555-558. [13]Lemmerhirt, D. F., Cheng, X., Kripfgans, O. D., Zhang, M., & Fowlkes, J. B. (2010). A fully-populated 32× 32 CMUT-in-CMOS array. IEEE Ultrasonics Symposium (IUS), pp. 559-562. [14]Kupnik, M., & Khuri-yakub, B. T. (2013). U.S. Patent No. 20,130,088,118. Washington, DC: U.S. Patent and Trademark Office. [15] 莊達人, & 電子工程. (2003). VLSI 製造技術. 高立出版. [16] Verweij, J. F., & Klootwijk, J. H. (1996). Dielectric breakdown I: A review of oxide breakdown. Microelectronics journal, 27(7), pp. 611-622. [17]Pey, K. L., & Tung, C. H. (2007). Physical characterization of breakdown in metal-oxide-semiconductor transistors. [18]Ergun, A. S., Yaralioglu, G. G., & Khuri-Yakub, B. T. (2003). Capacitive micromachined ultrasonic transducers: Theory and technology. Journal of Aerospace Engineering, 16(2), pp.76-84. [19] Tanaka, H., Machida, S., Hashiba, K., & Kobayashi, T. (2009). Acoustic characteristics of CMUT with rectangular membranes caused by higher order modes. IEEE Ultrasonics Symposium (IUS), pp. 434-437. [20]De, S. K., & Aluru, N. R. (2004). Full-Lagrangian schemes for dynamic analysis of electrostatic MEMS. Microelectromechanical Systems, Journal of, 13(5), pp.737-758. [21]Cai, M. (2011). A PolyMUMPs Capacitive Micromachined Ultrasonic Transducer(Doctoral dissertation, University of British Columbia). [22]Zhang, P., Fitzpatrick, G., Moussa, W., & Zemp, R. J. (2010). CMUTs with improved electrical safety & minimal dielectric surface charging. IEEE Ultrasonics Symposium (IUS), pp.1881-1885.
|