臺灣博碩士論文加值系統

本論文提出一單迴路多頻天線，目的為改善雙迴路loop天線，於應用時所造成的互感效應，並以手持式裝置之近場通訊(Near Field Communication, NFC)射頻天線，整合Qi無線充電線圈設計來當載具以便驗證單迴路多頻天線之效能。此架構之整體大小為68(L)x49(W) mm2。除了能夠用於13.56MHz之NFC系統讀卡器模式、卡片模式以及點對點模式三種功能，亦可切換為100kHz之Qi無線充電系統。
　　本論文所討論的Qi無線充電技術，即採用磁感應之方式，透過HFSS模擬，以及實作量測得知所設計之感應頻率正確性，也利用X-Ray螢光膜厚儀找出最小銅厚，達到降低製程成本。

In order to facilitate people who want having NFC and wireless charging functions together in the mobile, this paper presents a single-loop antenna. This antenna can switching each function more easily. Let mobile users more convenient.
　　The antenna size is 68 (L) x49 (W) mm2. This antenna not only can use the NFC system for 13.56MHz reader mode, the card mode and peer to peer mode but also can switch to 100kHz using the Qi wireless charging system.
　　The main reason to design this antenna is for solving the two loop antenna will occur mutual induction. With near field communication system, changing the line width and turns will increase the magnetic field energy intensity. With wireless charging antenna design, this thesis is according to Qi specification , using the HFSS simulation, measurement, X-Ray to find out the minimum copper thickness, to cost down it.

摘要…………………...…………………………..…………..……………..…...I
Abstract…...……...…...……………………………………..…........………….II
目錄………………...…………………………………………………………..III
圖目錄…………………………………………………………………………..V
表目錄…………………………………………………………………………VII
第一章　緒論…………...…...…………………………….…..………………..1
1.1研究動機………………………………………………………….....…1
1.2研究目的…………………………………………………………….…3
1.3研究方法與章節概述……………………………………………….…4
第二章　NFC系統與無線充電原理概述…………………………………..…6
2.1 RFID簡介………………………………………………………….…..6
2.1.1 RFID工作原理…………………………………………………7
2.2 NFC簡介………………………………………………………………8
2.2.1 NFC工作原理……………………………………………....…11
2.2.2 NFC-卡模式…………………………………………………...14
2.2.3 NFC-讀取器模式……………...………………………………15
2.2.4 NFC-點對點模式…………………………………………..….16
2.3無線充電簡介……………………………………………………...…18
2.3.1 Qi無線充電介紹………………………………………..….…23
第三章　實驗步驟及分析方法…………………………………………….…25
3.1實驗流程………………………………………………………..….…28
3.2銅厚製程……………………………………………………..…….…32
3.2.1化學鍍銅增厚……………………………………………....…32
3.2.2 降低成本...……………………………………………………34
第四章　結果與討論……………………………………………………….…35
4.1 NFC天線效能分析…………………………………………….…….35
4.2無線充電效能分析………………………………………………...…37
4.3銅厚分析…….………………………………………..………………44
4.4綜合比較…………………………………………………………...…49
第五章　結論…………………..…………………………………………...…52
第六章　參考文獻….…………………………………………………………53

1.Alippi, C. and Galperti, C., "An Adaptive System for Optimal Solar Energy Harvesting in Wireless Sensor Network Nodes". Circuits and Systems I: Regular Papers, IEEE Transactions on, Vol. 55, pp. 1742-1750. 2008.
2.簡煜倫，內建於手持式裝置之進場通訊無線傳能天線設計，碩士論文， 國立臺灣科技大學電機工程系，臺北，臺灣，2014。
3.Zhi Ning, C. and Xianming, Q., "Antennas for RFID applications". Antenna Technology (iWAT), 2010 International Workshop, 2010.
4.Minihold, M. R. "Near Field Communication (NFC) Technology and Measurements"., 2014.
5.Ahmad, M. Y. and Mohan, A. S., "Multi-loop bridge HF RFID reader antenna for improved positioning". Microwave Conference Proceedings (APMC), Asia-Pacific., 2011.
6.Li, L., Zehua, G., and Yazhou, W., "NFC antenna research and a simple impedance matching method". Electronic and Mechanical Engineering and Information Technology (EMEIT), International Conference, 2011.
7.Brown, T. W. C. and Diakos, T., "On the design of NFC antennas for contactless payment applications". Antennas and Propagation (EUCAP), Proceedings of the 5th European Conference.,2011.
8.Mujal, J., Ramon, E., Di, x, az, E., Carrabina, J., Calleja, A., Marti, x, nez, R., and Teres, L., "Inkjet printed antennas for NFC systems". Electronics, Circuits, and Systems (ICECS), 2010 17th IEEE International Conference., 2010.
9.Minwoo, J., Joon Goo, P., Jee Hyun, K., and Jeonghun, C., "Interoperability between Medical Devices Using near Field Communication". Information Science and Applications (ICISA), 2013 International Conference., 2013.

10.Yunlei, L., Jin, L., and Hoi, L., "Ground Switching Load Modulation With Ground Isolation for Passive HF RFID Transponders". Very Large Scale Integration (VLSI) Systems, IEEE Transactions on, Vol. 20, pp. 1443-1452. , 2012.
11.林崧銘，實用電子電路設計手册，全華圖書股份有限公司，新北，臺灣，1994。
12.謝沐田，高低頻變壓器設計，全華圖書股份有限公司，新北，臺灣，2008。
13.Bevelacqua, P. J., "ANTENNA ARRAYS: PERFORMANCE LIMITS AND GEOMETRY OPTIMIZATION "., 2008.
14.Adel S. Sedra, K.C.S.，MICROELECTRONIC CIRCUITS,OXFORD UNIVERSITY PRESS，New York，2004.
15.Hached, S., Trigui, A., El Khalloufi, I., Sawan, M., Loutochin, O., and Corcos, J., "A Bluetooth-based Low-Energy Qi-compliant battery charger for implantable medical devices". Bioelectronics and Bioinformatics (ISBB), 2014 IEEE International Symposium., 2014.
16.Bansal, R.. "The Future of Wireless Charging [AP-S Turnstile]". Antennas and Propagation Magazine, IEEE, Vol. 51, pp. 153-153., 2009
17.Olvitz, L., Vinko, D., and Svedek, T., "Wireless power transfer for mobile phone charging device". MIPRO,Proceedings of the 35th International Convention., 2012
18.Hui, S. Y., "Planar Wireless Charging Technology for Portable Electronic Products and Qi". Proceedings of the IEEE, Vol. 101, pp. 1290-1301., 2013
19.蕭宏，半導體製程技術導論，全華圖書股份有限公司，新北，臺灣，2013。