跳到主要內容

臺灣博碩士論文加值系統

(18.97.14.91) 您好!臺灣時間:2025/02/11 19:16
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:王俊超
研究生(外文):Jiunn-Chau Wang
論文名稱:應用DSP與PC486於三相感應電動機向量控制法之研究
論文名稱(外文):Field-oriented control of induction servo motor using digital signal processor and PC 486
指導教授:魏炯權 陳建富
指導教授(外文):J. C. WANG J. F. Chen
學位類別:碩士
校院名稱:國立成功大學
系所名稱:電機工程研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:1993
畢業學年度:81
語文別:中文
論文頁數:84
中文關鍵詞:插卡式電流調變電壓型變流器個人電腦PC 486數位訊號處理器
外文關鍵詞:the plug-board current hysteresis-controlled PWM VSIPC AT 486
相關次數:
  • 被引用被引用:0
  • 點閱點閱:128
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
感應電動機運用向量控制法可去除動態方程式之時變、耦合且非線性特性
,使轉矩與電流間呈線性關係,並可增進其速度響應的特性。但運用向量
控制法則,需要較多的計算,故會影響控制器的執行時間;為達到快速的
響應,本論文採用插卡式電流磁滯脈寬調變電壓型變流器為驅動系統,而
控制器則採用兩種不同型式:第一種是由高階程式語言 Turbo C 所撰寫
之控制程式在個人電腦PC 486上執行,並以8255 I/O卡當做輸出入埠,達
到既簡潔且便利的控制方式。第二種即是使用數位訊號處理器(TMS320
C30)配合外部硬體,來達到快速響應的目的。使用插卡式驅動系統可輕易
更換不同型式的驅動電路,來提供方便型更換驅動器的硬體設計。而第一
種控制器是運用個人電腦(PC AT 486)為主控制器,配合目前廣泛使用
的8255 A I/O介面卡來做輸出、入資料功能,並且以高階程式語言Turbo
C 來撰寫控制程式,如此不僅精簡控制器硬體電路,而且高階程式語言
Turbo C 易懂、易寫、除錯容易,更節省了軟體設計時間,實是未來最具
發展潛力的控制器之一,但由於486 CPU 所執行運算高階程式撰寫的向量
控制演算法,所需之取樣時間較長些,故提出使用快速型之CPU(TMS320
C30)來改進控制器的響應速度。  第二種控制器即是使用數位訊號處理
器 (DSP)來當主控制器,應用數位訊號處理單晶片TMS320C30 快速執行運
算的特性,配合模板本身的 D/A與A/D介面將內部數位訊號與外部的類比
訊號直接轉換,可使設計者節省外部硬體的電路,再配合上高階語言
Turbo c 的監督程式,可觀視控制過程中所執行的結果,並可線上變更命
令,亦是未來最具發展潛力的控制器之一。

Using the indirect field-oriented control method in induc- tion
motors can eliminate the characteristics of time-varing ,
coupling and nonlinear in dynamic equations . Thus it can be
obtained the linear relationship between torque and current .
The speed response will also be fast. Since a great number of
calculation is needed by the indirect field-oriented control
method. The time to executein the controller will be affected.
In this thesis , the plug-board current hysteresis-controlled
PWM VSI is used as drivers for the state of fast response. And
two different methods of control system are both used here.The
first one written by Turbo C language as control program is
executed on the PC AT 486, insertd 8255 card as I/O ports , to
get the control way with ease and convenience.In the other one,
DSP , the digital signal processor , is used as the controller
coinciding with hardwares outside to achieve the state by means
of TMS320C30 sigle chip. The benefit using the plug - board
drivers is to exchange different drivers easily. And the
control program for the first controller is of easy-
understanding , easy-writing . It can not only save the time
for developing software but simplify hardware circuit outside.
The other controller can improve the response of the first one
and improve that of system in addition.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top