跳到主要內容

臺灣博碩士論文加值系統

(44.222.64.76) 您好!臺灣時間:2024/06/16 04:33
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:林猷傑
研究生(外文):Lin, Yu-Chieh
論文名稱:大型結構物精密安裝定位-以鋼鐵廠冷軋機設備精密定位為例
論文名稱(外文):The Precise Alignment of Large Structure -Using the Precise Alignment of Tandem Cold Rolling Mill in Steelwork as an Example
指導教授:邱仲銘邱仲銘引用關係
指導教授(外文):Chiu Chung-Ming
學位類別:碩士
校院名稱:國立成功大學
系所名稱:測量工程學系
學門:工程學門
學類:測量工程學類
論文種類:學術論文
論文出版年:1997
畢業學年度:85
語文別:中文
論文頁數:100
中文關鍵詞:冷軋機安裝定位
外文關鍵詞:Cool Rolling MillAlignment
相關次數:
  • 被引用被引用:0
  • 點閱點閱:194
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
國內公私經建活動頻仍,理應有甚多大型結構物精密安裝定位的需求
,但測量專業似乎鮮少與聞,其原因可能是機械、土木方面不瞭解測量專
業的存在或不瞭解測量專業能提供的服務,而測量專業人員亦未積極主動
參與,因而對此類工程之實際作業情形缺乏認識。 鋼鐵廠冷軋機之
安裝為大型機械結構物安裝定位中的一個案例,面對其較大的作業範圍與
高精度安裝要求,目前由機械工程技術人員施行之安裝模式與方法,從測
量專業的觀點而言,其安裝作業之規劃設計、調整定位、運轉後安全監測
等各階段,仍有甚多可供探討的空間。 本研究乃對現行冷軋機安裝之
作業程序與作業方法進行通盤的檢討。運用工程測量中控制網佈設原則、
測量上的數據處理方法、品質評估方法,進行軋機安裝時控制網之規劃與
成果分析。參考一些大型機械結構物精密安裝工程所採用的測量方法與目
前的儀器設備,提出改進方案。統計測試方法應用於監測網點位變動分析
,為軋機安裝時之調整與運轉後的安全監測提供較為嚴密的作業方式。
本研究並對機械製造部門與測量專業的充分協調互動提出建議,期望藉由
機械製造部門的配合,促使此類大型機械構件之精密安裝測量作業之施行
更有效率。

Owing to much public or private economical andengineering
activities in Taiwan, there should be many needs on precise
alignment and installation for large construction objects. But
professional surveyors in Taiwan seem to participate in these
project very rarely. The reason may be that people in the field
of machinery and civil engineering don't know what surveying can
do for their works. Furthermore, surveyors in Taiwan seem to pay
less attentions on their needs. Therefore, the real application
aspects are less understood.The alignment of TCM (=tandem cold
rolling mill) in steelwork is an application case for large
mechanisms. The related works are done in a larger area and need
high accuracy. From the surveying point of view, there exists
something to be considered or improved, e.g. about operational
approaches and methods of layout design and alignment as well as
successive monitoring, which are controlled or executed by
professional mechanist at present.In this thesis, the
operational procedures for the TCM-alignment are examined
exactly. The principle of network design in engineering survey,
data processing methods and quality estimation techniques are
used in the network design and analysis for the TCM-alignment.
Comparing with surveying methodology adopted in some precise
alignment of large mechanical constructions and considering the
available instruments at present, some improvement plans are
proposed. Applying statistical tests to the deformation analysis
of monitoring network, a rigorous way is applicable for the
installation and monitoring of TCM.On the other hand, some
suggestions are offered for a good cooperation between
mechanical engineering and surveying. It is expected that the
concerned surveys about the precise alignment of large
mechanical equipment will be done more efficiently.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top