(100.26.179.251) 您好!臺灣時間:2021/04/14 07:51
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果

詳目顯示:::

我願授權國圖
: 
twitterline
研究生:李大正
研究生(外文):Lee, D. Z.
論文名稱:電腦輔助二維容差表設計
論文名稱(外文):Computer Aided 2-Dimensional Tolerance Charting
指導教授:鄧昭瑞鄧昭瑞引用關係
指導教授(外文):Tang
學位類別:碩士
校院名稱:國立台灣工業技術學院
系所名稱:機械工程技術研究所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:1997
畢業學年度:85
語文別:中文
論文頁數:110
中文關鍵詞:容差表製造程序最加化製程規劃
外文關鍵詞:Tolerance Chartmanufacture processOptimuzationprocess planning
相關次數:
  • 被引用被引用:1
  • 點閱點閱:97
  • 評分評分:系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:1
In the manufacturing process of mechanical components,tolernace
chart plays an important role to support processplanning and
quality control. This work presents the studyof computer-aided
design for two-dimensional tolerance charting.For a component
with its surfaces not perpendicular to each other,nominal cuts
and tangential cuts will change its vertical andhorizontal sizes
including both dimensions and tolerances.Analytical study of
these changes forms the basis of thetwo-dimensional tolerance
charting. In order to assign proper process tolerance and stock
removal for eachmanufacturing process, optimization techniques
are applyto search for the design corresponded to the least
manufacturingcost. In comparing to the previous design packages,
the new software developed by this work has significant
improvementin man-machine interface and can be executed under
the WINDOWenvironment. The use of Object Linked and Emmbedded
techniquesis the key issue to obtain a good connection between
different design modules.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
系統版面圖檔 系統版面圖檔