(34.201.11.222) 您好!臺灣時間:2021/02/25 14:02
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果

詳目顯示:::

我願授權國圖
: 
twitterline
研究生:曾枸諺
研究生(外文):Kou-Yen Tseng
論文名稱:北部地區粒料對高流動化混凝土力學性質影響之研究
論文名稱(外文):Influence of Northern-Taiwan Aggregates on the Mechanical Properties of Flowing Concrete
指導教授:楊仲家黃然黃然引用關係
指導教授(外文):C. C. YangR. Huang
學位類別:碩士
校院名稱:國立海洋大學
系所名稱:材料工程研究所
學門:工程學門
學類:材料工程學類
論文種類:學術論文
論文出版年:1999
畢業學年度:87
語文別:中文
論文頁數:117
中文關鍵詞:S/ATaicon混凝土配比設計高流動性
外文關鍵詞:S/ATaicon concretemix designfluidity
相關次數:
  • 被引用被引用:0
  • 點閱點閱:113
  • 評分評分:系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔系統版面圖檔
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本研究主要是在Taicon混凝土之基本要求下探討高流動化混凝土之力學性質,以水膠比、波索蘭材料、S/A(細骨材體積/總骨材體積)及強塑劑用量為變數。實驗中固定水泥用量,採不同水膠比之水泥漿為水泥質材料之母材,使用北部地區之細粗骨材,置入不同之粗細骨材含量及強塑劑用量,採試誤法進行各配比之坍度及坍流度試驗,根據試驗結果調整配比,分析符合Taicon混凝土之範圍,並探討其力學性質及配比設計。實驗中有幾組配比不使用強塑劑能符合Taicon要求,而研究結果顯示:在條件設定下,Taicon混凝土能以較簡單的配比方法得到。另外,用水量、S/A、強塑劑用量及波索蘭材料均直接影響工作度。

The mechanical properties of high fluidity concrete is investigated in this study under the basic requirement of Taicon (Taiwan concrete). In order to investigate the effect of w/b (water/binder) ratio, pozzolanic admixture, and superplasticizer content on the fluidity of Taicon, cylindrical specimens with different superplasticizer contents, pozzolanic admixtures (fly ash and slag), and various w/b ratios were cast and tested. In this study, some mix proportions satisfy the requirement of Taicon with 0% of superplasticizer. Based on the results of this study, the relation between w/b and superplasticizer content was shown and used to predict the superplasticizer content of the mix design.

中文摘要 Ⅰ
英文摘要 Ⅱ
目錄 Ⅲ
圖目錄 Ⅳ
表目錄 Ⅷ
第一章 緒論 1
1-1前言 1
1-2研究目的 2
1-3研究方法與步驟 2
第二章 文獻回顧 5
2-1飛灰 5
2-2爐石 8
2-3 工作度 12
第三章 實驗計劃 20
3-1前言 20
3-2試驗變數與配比設計 20
3-3試驗材料 28
3-4試驗儀器設備 32
3-5試驗方法 34
第四章 結果與討論 36
4-1 Taicon混凝土範圍分析 36
4-2 Taicon混凝土之坍度及坍流度 50
4-3 抗壓強度 79
4-4 彈性模數 93
4-5 配比設計 107
第五章 結論與建議 109
5-1結論 109
5-2 建議 110
參考文獻 111

1. P. J. M. Monteiro, P. R. L. Helene, and S. H. Kang, "Designing Concrete Mixtures for Strength, Elastic Modulus and Fracture Energy", Materials and Structures, Vol.26, pp.443~452, 1993.
2. A. M. Neville, "Aggregate Bond and Modulus of Elastic of Concrete", ACI Material Journal, Vol.94, No.1, pp.71~74, 1997.
3. F. A. Oluokun, E. G. Burdette, and J. H. Deatherage, "Elastic Modulus, Poisson's Ratio, and Compressive Strength Relationships at Early Ages", ACI Material Journal, Vol.88, No.1, pp.3~10, 1991.
4. P. K. Mehta, P. J. M. Monteiro, "Concrete-structure, properties, and materials", Prentice Hall, pp.117~121, pp.404~416, pp.2445~250, 1993.
5. W. F. Chen, J. E. Dahl, "Polymer-Impregnated Concrete as a Structural Material", Magazine for Concrete Research, Vol.26, No.86, pp.16~20, 1974.
6. J. Cook, "Research and Application of High Strength Concrete Using Class C Fly Ash", Concrete International, Design and Construction, Vol.4, No.7, pp.72~80, 1982.
7. P. S. Mangat, and B. T. Molloy, "Influence of PFA, Slag and Microsilica on Chloride Induced Corrosion of Reinforced in Concrete", Cement and Concrete Research, Vol.21, No.5, pp.819~834, 1991.
8. A. Bilodeau, V. Sivasundaram, K. E. Painter, and V. M. Malhotra, "Durability of Concrete Incorporating High Volumes of Fly Ash from Sources in the U.S.", ACI Materials Journal, Vol.91, No.1, pp.3~12, 1994.
9. Z. M. El-Shakra and V. S. Gopalaratnam, "Deflection Measurements and Toughness Evaluations for FRC", Cement and Concrete Research, Vol.23, pp.1455~1466, 1993.
10. P. Balaguru, R. Narahari, and M. Patel, "Flexural Toughness of Steel Fiber Reinforced Concrete", ACI Materials Journal, Vol.89, No.6, pp.541~546, 1992.
11. G. Chanvillard, N. Banhia, and P. -C. Aitcin, "Normalized Load-Deflection Curves for Fibre Reinforced Concrete under Flexure", Cement & Concrete Composites, Vol.12, pp.41~45, 1990.
12. ASTM C311, "Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as a Mineral Admixture in Portland-Cement Concrete", 1990.
13. R.O. Lane, "Effects of Fly Ash on Freshly Mixed Concrete", Concrete International, October, pp.50~52, 1983.
14. D. Ravina, P. K. Mehta, "Properties of Fresh Concrete Containing Large Amounts of Fly Ash", Cement and Concrete Research, Vol.16, No.2, pp.227~238, 1986.
15. P. K. Mehta, "Influence of Fly Ash Characteristics on the Strength of Portland-Fly Ash Mixtures", Cement Concrete Research, Vol.15, No.4, pp.669~674, 1985.
16. 黃兆龍, 郭淑德, 劉昌民, "含飛灰及強塑劑對水泥水化機理與性質之研究", 臺電工程月刊, 第528期, pp.44~64, 81年8月.
17. 林平全, "飛灰混凝土", 科技圖書股份有限公司, 第四版, pp.45~53, 84年12月.
18. C. L. Hwang and D. H. Shen, "The Effects of Blast-Furnace Slag and Fly Ash on the Hydration of Portland Cement", Cement and Concrete Research, Vol.21, No.4, pp.410-425, 1991.
19. T. R. Naik and S. S. Singh, "Influence of Fly Ash on Setting and Hardening Characteristics of Concrete Systems", ACI Materials Journal, Vol.94, No.5, pp355~360, 1997.
20. D. Ravina, "Slump Retention of Fly Ash Concrete With and Without Chemical Admixtures", Concrete International, April, pp.25~29, 1995.
21. D. Ravina, "Slump Loss of Fly Ash Concrete", Concrete International, April, pp.35~39, 1984.
22. D. Ravina, P. K. Mehta, "Compressive Strength of Low/High Fly Ash Concrete", Cement and Concrete Research, Vol.18, No.4, pp.571~583, 1988.
23. T. R. Naik, S. S. Singh, and M. M. Hossain, "Enhancement in Mechanical Properties of Concrete Due to Blended Ash", Cement and Concrete Research, Vol.26, No.1, pp.49~54, 1996.
24. 林炳炎, "飛灰用在混凝土中", 現代營建雜誌社, 初版, pp.162, 80年5月.
25. M. G. Alexander and T. I. Milne, "Influence of Cement Blend and Aggregate Type on Stress-Strain Behavior and Elastic Modulus of Concrete", ACI Materials Journal, Vol.92, No.3, pp.227~235, 1995.
26. F. D. Larrard and A. Belloc, "The Influence of Aggregate on the Compressive Strength of Normal and High-Strength Concrete", ACI Materials Journal, Vol.94, No.5, pp.417~426, 1997.
27. A. Cetin and R. L. Carrasquillo, "High-Performance Concrete : Influence of Coarse Aggregates on Mechanical Properties", Vol.95, No.3, pp.252~261, 1998.
28. W. Baalbaki, B. Benmokrane, O. Chaallal, and P. C. Aitcin, "Influence of Coarse Aggregate on Elastic Properties of High-Performance Concrete", ACI Materials Journal, Vol.88, No.5, pp.499~503, 1991.
29. G. Giaccio, C. Rocco, D. Violini, J. Zappitelli, and R. Zerbino, "High-Strength Concretes Incorporating Different Coarse Aggregates", ACI Materials Journal, Vol.89, No.3, pp242~246, 1992.
30. P. C. Aitcin and P. K. Mehta, "Effect of Coarse-Aggregate Characteristics on Mechanical Properties of High-Strength Concrete", ACI Materials Journal, Vol.87, No.2, pp.103~107, 1990.
31. C. C. Yang, "Effect of the Transition Zone on the Elastic Moduli of Mortar", Cement and Concrete Research, Vol.28, No.5, pp727~736, 1998.
32. P. J. Tikalsky and R. L. Carrasquillo, "Influence of Fly Ash on the Sulfate Resistance of Concrete", ACI Structural Journal, Vol.89, No.1, pp.69~75, 1992.
33. J. Olek and S. Diamond, "Proportioning of Constant Paste Composition Fly Ash Concrete Mixes", ACI Materials Journal, Vol.86, No.2, pp159~166, 1989.
34. 吳鍾瑾, "飛灰在滾壓混凝土中的作用及其影響", 土木水利, 第20卷, 第3期, pp.51~59, 82年11月.
35. M. K. Gopalan, "Nucleation and Pozzolanic Factors in Strength Development of Class F Fly Ash Concrete", ACI Materials Journal, Vol.90, No.2, pp.117~121, 1993.
36. N. J. Gardner, "Effect of Temperature on the Early-Age Properties of Type I, Type III, and Type/Fly Ash Concretes", ACI Materials Journal, Vol.87, No.1, pp.68~78, 1989.
37. R. N. Swamy and H. B. Mahmud, "Mix Proportions and Strength Characteristics of Concrete Containing 50 Percent Low-Calcium Fly Ash", Fly ash, Silica Fume, Slag, and Natural Pozzolans in Concrete: proceedings, second international conference, Madrid, Spain, sp-91, pp.413~432, 1986.
38. ACI 226, "Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete", ACI 226.1R-87.
39. V. M. Malhotra, "Fly Ash, Slag, Silica Fume, and Rice-Husk Ash in Concrete: A Review", Concrete International, April, pp.23~28, 1993.
40. J. W. Meusel and J. H. Rose, "Production of GBF Slag at Sparrowos Point, and the Workability and Strength Potential of Concrete Incorporating the Slag", ACI sp-79, pp.867~890, 1983.
41. V. Sivasundaram and V. M. Malhotra, "Properties of Concrete Incorporating Low Quantity of Cement and High Volumes of Ground Granulated Slag", ACI Materials Journal, Vol.89, No.6, pp.554~563, 1992.
42. S. Nishibayashi, A. Yoshino, S. Hideshima, M. Takada, and T. Chikada, "A Study on Superplasticized Concrete Containing High Volumes of Blast-Furnace Slag", Superplasticizers and other chemical admixtures in concrete: proceedings, third international conference, Ottawa, Canada, sp-119, pp.445~455, 1989.
43. P. J. Wainwright and J. J. A. Tolloczko, "Early and Later Age Properties of Temperature Cycled Slag-OPC Concretes", Fly ash, Silica Fume, Slag, and Natural Pozzolans in Concrete: proceedings, second international conference, Madrid, Spain, sp-91, pp.1293~1321, 1986.
44. D. M. Roy and G. M. Idorn, "Hydration, Structure, and Properties of Blast Furnace Slag Cements, Mortars, and Concrete", ACI Journal, Vol.26, Mar., pp.444~457, 1982.
45. J. J. Brooks and A. F. Al-Kaisi, "Early Strength Development of Portland and Slag Cement Concretes Cured at Elevated Temperatures", ACI Materials Journal, Vol.87, No.5, pp.503~507, 1990.
46. L. Jianyong and T. Pei, "Effect of Slag and Silica Fume on Mechanical Properties of High Strength Concrete", Cement and Concrete Research, Vol.27, No.6, pp833~837, 1997.
47. P. S. Mangat and J. M. Khatib, "Influence of Fly Ash, Silica Fume, and Slag on Sulfate Resistance of Concrete", ACI Materials Journal, Vol.92, No.5, pp.542~552, 1995.
48. V. M. Malhotra, "Superplasticizers, Pozzolans, and Granulated Blast-Furnace Slags in Concretes: A Review", Lewis H. Tuthill International Symposium on Concrete and Concrete Construction, sp-104, pp.63~88, 1987.
49. W. C. Jau and D. S. Tsay, "A Study of the Basic Engineering Properties of Slag Cement Concrete and Its Resistance Seawater Corrosion", Cement and Concrete Research, Vol.28, No.10, pp.1363~1371, 1998.
50. P. M. Gifford and J. E. Gillott, "Freeze-Thaw Durability of Activated Blast Furnace Slag Cement Concrete", ACI Material Journal, Vol.93, No.3, pp.242~245, 1996.
51. E. Douglas, A. Bilodeau, and V. M. Malhotra, "Properties and Durability of Alkali-Activated Slag Concrete", ACI Materials Journal, Vol.89, No.5, pp.509~516, 1992.
52. E. Douglas, A. Bilodeau, J. Brandstetr, and V. M. Malhotra, "Alkali Activated Ground Granulated Blast-Furnace Slag Concrete : Preliminary Investigation", Cement and Concrete Research, Vol.21, No.1, pp.101~108, 1991.
53. P. J. Tumidajski and G. W. Chan, "Durability of High Performance Concrete in Magnesium Brine", Cement and Concrete research, Vol.26, No.4, pp.557~565, 1996.
54. R. N. Swamy and A. Bouikni, "Some Engineering Properties of Slag Concrete as Influenced by Mix Proportioning and Curing", ACI Materials Journal, Vol.87, No.3, pp.210~220, 1990.
55. ASTM C1017, "Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete", 1992.
56. K. C. Hover, "Concrete Mixture Proportioning with Water-Reducing Admixtures to Enhance Durability: A Quantitative Model", Cement and Concrete Composites, Vol.20, pp.113~119, 1998.
57. C. Nmai and B. Violetta, "The Use of Flowing Concrete in Congested Areas", Concrete International, September, pp.53~57, 1996.
58. BS1881 Testing Concrete: Part 102, "Method for the Determination of Slump", British Standards Institution, 1983.
59. A. M. Neville, "Properties of Concrete", Longman, Fourth Edition, pp.186~200, 1995.
60. BS1881 Testing Concrete: Part 105, "Method for the Determination of Flow", British Standards Institution, 1984.
61. P. Bartos, "Fresh Concrete-properties and tests", Developments in Civil Engineering, Vol.38 (in UK), pp.111~115, 1992.
62. F. D. Larrard, "A Method for Proportioning High-Strength Concrete Mixtures", Cement and Concrete and Aggregates, CCAGDP, Vol.12, No.2, pp.47~52, 1990.
63. K. W. Nasser, "New and Simple Tester for Slump of Concrete", ACI Journal, Vol.73, No.10, pp.561~565, 1976.
64. K. W. Nasser and A. A. Al-Manaseer, "Interoperator Test Program to Determine the Reliability of the K-Slump Tester", ACI Materials Journal, May-June, pp.197~201, 1988.
65. A. A. Al-Manaseer and A. J. Albert, "Measuring the Consistency and Workability of Superplasticized Concrete", ACI Material Journal, Vol.92, No.3, pp.286~290, 1995.
66. JSCE-F503, "Method of Test for the Slump Flow of Concrete", Standards of Japan Society of Civil Engineers, 1990.
67. E. K. Schrader, "Mistakes, Misconceptions, and Controversial Issues Concerning Concrete and Concrete Repairs", Concrete International, September, pp.52~56, 1992.
68. S. Popovics, "The Slump Test is Useless-or is it? ", Concrete International, September, pp.30~33, 1994.
69. M. Mittelacher, "Re-Evaluating the Slump Test", Concrete International, October, pp.53~56, 1992.
70. G.H. Tattersall, M. Sc., C. Phys., F. Inst. P., F. I. Ceram., "Workability and Quality Control of Concrete", E&FN SPON, pp.54~73, 1991.
71. C. Hu and F. D. Larrard, "The Rheology of Fresh-Performance Concrete", Cement and Concrete Research, Vol.26, No.2, pp.283~294,1996.
72. F. D. Larrard, C. Hu, T. Sedran, J. C. Szitkar, M. Joly, F. Claux, and F. Derkx, "A New Rheometer for Soft-to Fluid Fresh Concrete", ACI Materials Journal, Vol.94, No.3, pp.234~243, 1997.
73. C. Hu and F. D. Larrard, "Rheological Testing and Modeling of Fresh High Performance Concrete", Materials and Structures, Vol.28, pp.1~7, 1995.
74. J. Murata and H. Kikukawa, "Viscosity Equation for Fresh Concrete", ACI Materials Journal, Vol.89, No.3, pp.230~237, 1992.
75. I. B. Topcu and F. Kocataskin, "A Two-Phase Composite Materials Approach to the Workability of Concrete", Cement and Concrete Composites, Vol.17, pp.319~325, 1995.
76. P. F. G. Banfill, "Experimental Investigations of the Rheology of Fresh Mortar", Properties of Fresh Concrete: Proceedings of the colloquium organized on Behalf of the Coordinating Committee for Concrete Technology of RILEM, pp.145~153, 1990.
77. J. Murata and K. Suzuki, "New Method of Testing the Flowability of Grout", Magazine of Concrete Research, Vol.49, No.181, pp.269~276, 1997.
78. H. Okamura, "Self-Compacting High-Performance Concrete", Concretge International, July, pp.50~54, 1997.
79. M. Hayakama, Y. Matsuoka, and T. Shindoh, "Development and Application of Super-Workable Concrete", Proceedings of the International RILEM Workshop Organized by RiLEM Technical Committee TC 145: Special Concretes Workability and Mixing, E&FN SPON, 1994.
80. H. Okamura and K. Ozawa, "Self-Compacting High Performance Concrete", Structural Engineering International, pp.269~270, 1996.
81. M. Ouchi, M. Hibino, and H. Okamura, "Effect of Superplasticizer on Self-Compactability of Fresh Concrete", Transportation Research Record, No.1574, pp.37~40, 1996.
82. H. Kasami, T. Ikeda, and S. Yamane, "On Workability and Pumpability of Superplasticized Concrete-Experience in Japan", Superplasticizers in concrete, sp-62, pp.67~85, 1979.
83. P. C. Aitcin, C. Jolicoeur, and G. MacGregor, "Superplasticizers: How They Work and Why They Occasionally Don't", Concrete International, May, pp.45~52, 1994.
84. A. A. Ramezanianpour, V. Sivasundaram, and V. M. Malhotra, "Superplasticizers: Their Effect on the Strength Properties of Concrete", Concrete International, April, pp.30~35, 1995.
85. S. Y. Chan, N. Q. Feng, and M. K. C. Tsang, "Workability Retention of High Strength/Superplasticized Concrete", Magazine of Concrete Research, Vol.48, No.177, pp.301~309, 1996.
86. J. Punkki, J. Golaszewski, and O. E. Gjorv, "Workability Loss of High-Strength Concrete", ACI Materials Journal, Vol.93, No.5, pp.427~431, 1996.
87. A. F. Abbasi, M. Ahmad, and M. Wasim, "Optimization of Concrete Mix Proportioning Using Reduced Factorial Experimental Technique", ACI Materials Journal, Vol.84, No.1, pp.55~63, 1987.
88. P. Domone, "The Slump Flow Test for High-Workability Concrete", Cement and Concrete Research, Vol.28, No.2, pp.177~182, 1998.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
系統版面圖檔 系統版面圖檔