臺灣博碩士論文加值系統

將鐵氟龍（PTFE）纖維加入聚縮醛（POM）工程塑膠中，以增加其耐磨耗及降低摩擦係數。然而，由於PTFE具有非常低的表面能，導致其黏著力很弱，而且會降低摻合物機械性質。為了改善纖維與基材間的界面黏著力，作者使用氬氣電漿處理鐵氟龍纖維（PPTFE）且將Acrylic acid (AAc)利用UV光接枝於纖維上(AAc-g-PPTFE)。在本研究中，實驗的參數為電漿處理時間、接枝單體的濃度及接枝的時間。

The various kinds of PTFE fibers were added into POM to increase the wear resistance and to decrease the frictional coefficient of POM. However, PTFE has a low surface energy, resulting in weak adhesion bonding and the decrease of mechanical properties. To enhance the adhesion between the matrix and fiber, the author used argon plasma to treat the surface of PTFE fiber (PPTFE) and then the acrylic acid (AAc) was grafted onto the surface of PPTFE fiber (AAc-g-PPTFE). The experiment parameters in this investigation were plasma treatment time, concentration of grafting monomers, and grafting time.

List of Figures……………………………………………………………Ⅰ
List of Tables ……………………………………………………………Ⅴ
Abstract (Chinese) ………………………………………………………Ⅵ
Abstract (English) ………………………………………………………Ⅶ
Chapter 1
Introduction …………………………………………………………1
Chapter 2
Theories and Literatures Review ……………………………………3
Chapter 3
Experiment ………………………………………………………30
Chapter 4
Results and Discussion …………………………………………40
Chapter 5
Conclusions ……………………………………………………92
References …………………………………………………………………94

1. Plastic Engineering, Engineering resins primer, December, 30, 20 (1974).
2. R. E. Estell, Plastic Design and Processing 26, 35 (1971).
3. W. Y. Chiang and C. Y. Huang, J. Chin. I. Ch. E. 22, 291 (1991).
4. W. Y. Chiang and C. Y. Huang, Angew. Makromol. Chem. 196, 21 (1992).
5. W. Y. Chiang and C. Y. Huang, Eur. Polym. J. 29(6), 834 (1992).
6. W. Y. Chiang and C. Y. Huang, J. Appl. Polym. Sci. 47, 577 (1993).
7. Y. Yamaguchi, I. Sekiguchi, K. Sugiyama, and N. Suzuki, Kogakuin Daigaku Kenkyu Hokoku 31, 26 (1972).
8. Y. Okubo, Y. Yamaguchi, and I. Sekiguchi, Kogakuin Daigaku Kenkyu Hokoku 53, 22 (1982).
9. Taiho Kogyo Co., Ltd., Jpn. Kokai Tokkyo Koho, JP 60, 72, 952.
10. K. Ziemianski, Trybologia 19(6), 4 (1988).
11. I. Sekiguchi, Y. Yamaguchi, Y. Okubo, H. Kondo, and S. Onda, Kogakuin Daigaku Kenkyu Hokoku 64, 49 (1988).
12. K. Tanaka, Y. Yamada, J. Synth. Lubr. 5(2), 115 (1988).
13. H. Endo, M. Umeda, Jpn. Kokai Tokkyo Koho, JP 62, 54, 753.
14. W. Y. Chiang and C. Y. Huang, Composite Polym. 4, 251 (1991).
15. S. A. Brown, Polym. Mater. Sci. Eng. 53, 494 (1985).
16. V. K. Jain, Wear 92(2), 279 (1983).
17. V. K. Jain, Wear Mater. 583 (1983).
18. K. Tanaka, J. Lubr. Technol. 99(4), 408 (1977).
19. T. Okada, Jpn. Plast. Age. 15, 22 (1977).
20. J. I. Yamaki, Kobunshi Ronbunshu 33(6), 347 (1976).
21. J. I. Yamaki, Kobunshi Ronbunshu 33(7), 367 (1976).
22. M. Wagu, M. Hino, Japan Kokai 74, 108, 394.
23. H. Takahashi, K. Iwata, Jpn. Kokai Tokkyo Koho, JP 63, 179, 958.
24. T. Matsuo, S. Mori, N. Yokota, Jpn. Kokai Tokkyo Koho, JP 61, 12, 743.
25. H. Yamaguchi, Y. Tsuji, K. Tsukada, Jpn. Kokai Tokkyo Koho, JP 60, 235, 767.
26. Sumitomo Electric Industries Ltd., Jpn. Kokai Tokkyo Koho, JP 60, 58, 466.
27. Sumitomo Electric Industries Ltd., Jpn. Kokai Tokkyo Koho, JP 82, 42, 764.
28. K. R. Waston, Y. T. Wu, and P. G. Riewald, Plast. Eng. 45(3), 83 (1989).
29. G. Parlow, Gummi, Fasern, Kunstst. 41(12), 608 (1988).
30. A. Kitamura and M. Kawamura, Jpn. Kokai Tokkyo Koho, JP 61, 76, 594.
31. Bando Chem. Industries, Ltd., Jpn. Kokai Tokkyo Koho, JP 59, 179, 653.
32. Bando Chem. Industries, Ltd., Jpn. Kokai Tokkyo Koho, JP 58, 13, 226.
33. Y. Yamaguchi, T. Kitsukawa, and H. Ouchi, Kogakuin Daigaku Kenkyu Hokoku 63, 45 (1987).
34. K. Suzuki and M. Ogahama, Jpn. Kokai Tokkyo Koho, JP 62, 04, 748.
35. O. Jinno and T. Fukuoka, Jpn. Kokai Tokkyo Koho, JP 62, 10, 165.
36. C. Y. Huang, R. S. Chou, The Study on the Interface Modification of Polyactal/Polytetrafluoroethylene Composites, Thesis, Tatung Institute of Techonology (1997).
37. 陳玉惠, 林士偉, 聚縮醛/改質鐵氟龍分子間作用力之研究, 碩士論文, 中原大學 (1997).
38. R. J. Plunkett, U. S. Pat. 2, 230, 654 (1941).
39. L. E. Nielsen, in Mechanical Properties of Polymers and Composites, Marcel Dekker, Inc., 1974, Chapter 8.
40. F. L. Matthews and R. D. Rawlings, in Composite Materials: Engineering and Science, Chapman & Hall, 1993, Chapter 10.
41. R. B. Seymour, Polym. Plast. Technol. & Eng. 7, 49 (1976).
42. K. Friedrich, Ed., Application of Fracture Mechanics to Composite Materials, Chapter 6, Z. Eliezer, in Friction and Wear of Metal Matrix-Graphite Fiber Composites, Elsevier, 1989.
43. D. W. Clegg and A. A. Collyer, in Mechanical Properties of Reinforced Thermoplastics, Elsevier, 1986.
44. B. Chung and C. Cohen, Polym. Eng. & Sci. 25, 1001 (1985).
45. M. Sanou, B. Chung, and C. Cohen, Polym. Eng. & Sci. 25, 1008 (1985).
46. M. R. Kamal, E. Chu, P. G. Lafleur, and M. E. Ryan, Polym. Eng. & Sci. 26, 190 (1986).
47. S. H. Emerman, Polym. Eng. & Sci. 27, 1105 (1987).
48. Z. Tadmor, J. Appl. Polym. Sci. 18, 1753 (1974).
49. R. P. Sheldon, in Composite Polymeric Materials, Elsevier, 1982, Chapter 3.
50. F. L. Matthew and R. D. Rawlings, in Composite Materials: Engineering and Science, Chapman & Hall, 1993, Chapter 11.
51. K. Friedrich, Ed., Application of Fracture Mechanics to Composite Materials, Chapter 1, H. Czichos, in Introduction to Friction and Wear, Elsevier, 1989.
52. D. Tabor, Trans. ASME 103, 169 (1981).
53. H. Czichous, Umschau 71. 116 (1971).
54. N. P. Suh, in Tribological Technology, Vol. I, Ed. P. Senholzi, Martinus Nijhoff, The Hague, 1982, pp. 37-208.
55. G. P. Koo, in Fluoropolymers, Ed. L. A. Wall, Wiley Interscience, New York (1972).
56. F. Mark and W. G. Gaylord, Eds., in Encyclopedia of Polymer Science and Technology, 13, Wiley, New York, 1970.
57. W. A. Zisman, ACS Adv. Chem. Ser. 43, 9 (1964).
58. M. W. Pascoe, Tribology, 184 (1973).
59. M. O. W. Richards and M. W. Pascoe, in Advances in Polymer Friction Wear, 5A, L. H. Lee, Ed. Plenum Press, New York, 123 (1974).
60. Minnesota Mining and Manufacture Co., Brit. Patent 765, 284 (1957).
61. G. Rappaport, U. S. Patent 2, 809, 130 (1957).
62. D. M. Brewis, R. H. Dahm, and M. B. Konieczko, Makromol. Chem. 43, 191 (1975).
63. R. J. Purvis and W. R. Beck, U. S. Patent 2, 780, 063 (1957).
64. J. Jansta, F. P. Dousek, and J. Riha, J. Electroanal. Chem. 38, 445 (1972).
65. J. Jansta, F. P. Dousek, and J. Riha, J. Appl. Polym. Sci. 19, 3201 (1975).
66. F. W. Ryan, G. M. Sessler, J. E. West, and H. Schonhorn, J. Appl. Polym. Sci. 17, 3199 (1973).
67. G. M. Gosedge, Ph. D. Thesis, University College of Wales (1979).
68. P. Cadman and G. M. Gosedge, J. Mat. Sci. 14, 2672 (1979).
69. R. K. Wells, M. E. Ryan, and J. P. S. Badyal, J. Phys. Chem. 97, 12879 (1993).
70. H. Kudoh, T. Sasuga, and T. Seguchi, Polymer 37, 16, 3737 (1993).
71. Jiazhen Sun, Yuefang Zhang, and Xiaoguang Zhong, Polymer 35, 13, 2881 (1994).
72. R. F. Roberts, F. W. Tyan, H. Schonohorn, G. M. Sessler, and J. E. Wert, J. Appl. Polym. Sci. 20, 255 (1976).
73. S. L. Vogel and H. Schonhorn, J. Appl. Polym. Sci. 23, 2493 (1979).
74. H. Schonohorn and R. H. Harvben, J. Appl. Polym. Sci. 11, 1461 (1967).
75. Da Youxian, Hans J. Griesser, Albert W. H. Mau, Robert Schmidt, and John Liesegang, Polymer 32, 6, 1126 (1991).
76. H. Brecht, F. Mayer, and H. Binder, Makromol. Chem. 33, 89 (1973).
77. D. W. Dwight and W. M. Riggs, J. Electr. Spectrosc. Rel. Phenom. 5, 447 (1974).
78. H. Yasuda, H. C. Marsh, S. Brandt, and C. H. Reilley, J. Polym. Sci. Polym. Chem., Ed. 15, 991 (1977).
79. H. Yasuda and G. C. Marsh, Am. Chem. Soc. Poly. Prepr. 16, 142 (1975).
80. T. Hirotsu and S. Ohnishi, J. Adhesion 11, 57 (1980).
81. G. C. S. Collins, A. C. Lowe, and D. Nicholas, Eur. Polym. J. 9, 1173 (1973).
82. R. H. Hansen and H. Schonohorn, Polym. Lett. 4, 203 (1966).
83. H. Schonohorn, F. W. Ryan, and R. H. Hansen, J. Adhesion 2, 93 (1970).
84. J. R. Hollahan, B. B. Stafford, R. D. Falls, and S. T. Payne, J. Polym. Sci. 13, 807 (1969).
85. C. M. Chan, in Polymer Surface Modification and Characterization, Hanser/Gardner, New York, 1994, Chapter 6.
86. D. T. Clark, W. J. Feast, W. K. R. Musgrave, and I. Ritchie, J. Polym. Sci. Polym. Chem. Ed. 13, 857 (1975).
87. R. d’Agostino, F. Cramarossa, and F. Fracassi, in Plasma Deposition, Treatment, and Etching of Polymers, Ed. R. d’Agostino, Academic Press, New York, 1990, pp. 95-162.
88. K. Asfardjani, Y. Segui, Y. Aurelle, and N. Abidine, J. Appl. Polym. Sci. 43, 271 (1991).
89. C. M. Chan, in Polymer Surface Modification and Characterization, Hanser/Gardner, New York, 1994, Chapter 5.
90. A. S. Hoffman, Adv. Polym. Sci. 57, 142 (1984).
91. A. S. Hoffman, J. Appl. Polym. Appl. Polym. Symp. 42, 251 (1988).
92. H. Inou and S. Kohama, J. Appl. Polym. Sci. 29, 877 (1984).
93. C. G. Beddows, H. G. Gill, and J. T. Guthrie, Biotechnol. Bioeng. 27, 579 (1985).
94. P. Dorwjanyn and J. L. Garnett, Polym. Mater. Sci. Eng. 57, 278 (1987).
95. J. L. Garnett, S. V. Jankiewicz, M. A. Long, and D. F. Sangster, Radiat. Phys. Chem. 27, 301 (1986).
96. K. Allmer, J. Hilborn, P. H. Larsson, A. Hult, and B. Ranby, J. Polym. Sci. Polym. Chem. Ed. 28, 173 (1990).
97. Y. Uyama and Y. Ikada, J. Appl. Polym. Sci. 41, 619 (1990).
98. K. Allmer, A. Hult, and B. Ranby, J. Polym. Sci. Polym. Chem. Ed. 27, 3405 (1989).
99. K. Allmer, A. Hult, and B. Ranby, J. Polym. Sci. Polym. Chem. Ed. 27, 3419 (1989).
100. C. H. Hoyle, in Radiation Curing of Polymeric Materials, Vol. 417, Ed. C. E. Hoyle and J. E. Kinstle, ACS Symposium Series, Washington, DC, 1990, p. 1.
101. B. Mattson and B. Stenberg, J. Appl. Polym. Sci. 50, 1247 (1993).
102. T. Ko and S. T. Cooper, J. Appl. Polym. Sci. 47, 1601 (1993).
103. F. Poncin-Epaillard, B. Chevet, and J. C. Brosse, J. Appl. Polym. Sci. 53, 1291 (1994).
104. 謝國煌，陳原振，曾勝茂。科儀新知第十八卷第四期。86, 2.
105. S. Wu, in Polymer Interface and Adhesion, MECEL DEKER, INC., New York, 1982, pp. 280-283.
106. C. Y. Huang, C. C. Cheng, The Research and Application of Lubricant Fiber Composited Polyactal Engineering Plastics, Thesis, Tatung Institute of Techonology (1996).