跳到主要內容

臺灣博碩士論文加值系統

(44.222.64.76) 您好!臺灣時間:2024/06/16 04:53
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:張祐睿
研究生(外文):Yu-Jui Chang
論文名稱:應用於自由曲面球銑加工之CNC工具機插位器設計
論文名稱(外文):CNC Machine Tool Surface Interpolator for Ball-End Milling of Free-Form Surfaces
指導教授:羅致卿
指導教授(外文):Chih-Ching Lo
學位類別:碩士
校院名稱:逢甲大學
系所名稱:機械工程學系
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2000
畢業學年度:88
語文別:中文
論文頁數:54
中文關鍵詞:數控工具機計算機輔助製造曲面加工插位器
外文關鍵詞:CNC machine toolball-end millingfree-form surfaceinterpolator
相關次數:
  • 被引用被引用:0
  • 點閱點閱:190
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本文將探討在傳統的CNC工具機插位器設計方式之下,以球銑刀切削任一曲面時所衍生出的瓶頸,進而提出一個全新的插位器設計概念,以期修正誤差、資料流等存在已久的問題。此曲面插位器(傳統的插位器大致上可分成線性及曲線兩大類)整體說來則包含了以下幾個主要的部份:線上即時的CC路徑規劃、CC路徑的插位以及刀具的加工補償。本文中提出了三種加工方式,分別是等參數、等扇形以及等剖面,將在稍後依次詳述其設計的概念與理論基礎,用以減少CNC之加工資料流過大以及提高加工精度而達到精密切削加工之最終目的。

Because of so many problems in the traditional CNC machine tool interpolator design, this paper presents a new type of it that is capable of generating the cutter path for ball-end milling of a free-form surface. The surface interpolator comprises three major points as follows: On-line algorithms for cutter-contact CC path scheduling, CC path interpolator, and tool offsetting. There are three kinds of interpolator algorithms, iso-parametric, iso-scallop and iso-planar respectively. The proposed surface interpolator gains the advantages for minimizing the data feeding to the CNC machine tool and maintaining the desired feedrate and more position accuracy along the CC path.

中文摘要……………………………………………………………Ⅰ
英文摘要……………………………………………………………Ⅱ
目錄……………………………………………………………Ⅲ
圖表目錄……………………………………………………………Ⅴ
第一章 緒論……………………………………………………………1
1 —1 前言……………………………………………………………1
1 —2 研究動機與目的………………………………………………1
第二章 CNC工具機之概述與插位器角色之定位………………………4
2 —1 CC速度補償的原理與其必要性………………………………4
2 —2 插位器在整個加工過程中所扮演的角色……………………6
2 —3 CNC工具機加工流程總觀……………………………………6
第三章 刀具路徑規劃與插位器概述…………………………………7
3 —1 刀具路徑規劃之概述…………………………………………7
3 —2 插位器之基本概述……………………………………………9
第四章 路徑規劃與插位器的理論概述………………………………11
4 —1 CC路徑之插位…………………………………………………11
4 —2 刀具的補償……………………………………………………12
第五章 CC路徑規劃與曲面插位器的理論推演………………………14
5 —1等參數工具機之理論推演……………………………………14
5 —2等扇形高度工具機之理論推演………………………………20
5 —2 —1現有設計方式與新發展設計方式之不同點…………21
5 —2 —2等扇形高度之設計步驟………………………………23
5 —3等剖面高度工具機之理論推演………………………………30
5 —3 —1等剖面高度之設計理論………………………………31
5 —3 —2等剖面高度之設計公式演算推導……………………31
5 —4插位器的附加功能─刀具干涉的避免………………………35
第六章 應用範例之電腦模擬與結果討論……………………………37
6 —1應用範例之敘述………………………………………………37
6 —2電腦模擬之描述………………………………………………37
6 —3結果與討論……………………………………………………43
參考文獻………………………………………………………………45
1. Aomura, S., and Uehara, T., 1990, “Self-Intersection of an Offset,” Computer-Aided Design, Vol. 22, No. 7, September, pp. 417-422.
2. Borow, J. E., 1985, “NC Machine Tool Path Generation From CSG Part Representation, ”Computer-Aided Design, Vol.17, No. 2, March, (1985), pp. 69-76.
3. Broomhead, P. and Edkins, M., 1986, “Generating NC Data at the Machine Tool for the Manufacture of Free-Form Surfaces, “International Journal of Production Research, Vol. 24 No. 1, January, pp. 1-24.
4. Chen, Y. D., Ni, J., and Wu, S. M., 1993, “Real-Time CNC Tool Path Generation for Machining IGES Surfaces, “ASME Journal of Engineering for Industry, Vol. 115, November, [[. 480-486.
5. Chou, J. J., and Yang, D. C. H., 1991, “Command Generation for Three-Axis CNC machining,” ASME Journal of Engineering for Industry, Vol. 113, August, pp. 305-310.
6. Choi, B. K., Lee, C. S., Hwang, J. S., and Jun, C. S., 1988, “Compound Surface Modeling and Machining,” Computer-Aided Design, Vol. 20, No. 3, April, , pp. 127-136.
7. Choi, B. K., and Jun, C. S., 1989, “Ball-End Cutter Interference Avoidance in NC Machining of Sculptured Surfaces,” Computer-Aided Design, Vol. 21, No. 6, July/August, pp. 371-378.
8. Faux, I.D., and Pratt, M.J., Computational Geometry for Design and Manufacturing, John Wiley & Sons, 1981.
9. Hwang, J. S., 1992, “Interference-Free Tool Path Generation in the NC Machining of Parametric Compound Surfaces,” Computer-Aided Design, Vol. 24, No. 12, December, pp. 667-676.
10. Kim, B.H., and Chu, C.N., “Effect of Cutter mark on surface Roughness and Scallop Height in Sculptured Surface Machining,” Computer-Aided Design, Vol. 26, No. 3 1994, pp. 179-188.
11. Kiritsis, D., 1994, “High Precision Interpolation Algorithm for 3D Parametric Curve Generation,” Computer-Aided Design, Vol. 26, No. 11, November, pp. 850-856.
12. Koren, Y., Computer Control of Manufacturing Systems, McGraw-Hill, 1983.
13. Koren, Y., 1983, Computer Control of Manufacturing Systems, McGraw-Hill. Lin, R. S., and Koren, Y., 1996, “Efficient Tool-Path Planning for Machining Free-Form Surfaces,” ASME Journal of Engineering for Industry, Vol. 118, February, pp. 20-28.
14. Lo, C. C., 1997, “Feedback Interpolators for CNC Machine Tools,” ASME Manufacturing Science and Engineering, Vol. 119, No. 4, November, pp. 587-592.
15. Lo, C.C., “A New Approach to CNC Tool Path Generation,” Computer-Aided Design, Vol. 30, No. 8, 1998, pp. 649-655.
16. Lin, R.S., and Koren, Y., “Efficient Tool-Path Planning for Machining Free-Form Surfaces,” ASME Journal of Engineering for Industry, Vol. 118 1996, pp. 20-28.
17. Loney, G. C., Ozsoy, T. M., 1987, “NC Machining of Free Form Surfaces,” Computer-Aided Design, Vol. 19, No. 2, March, March, pp. 85-90.
18. Luenberger, K.G., Linear and Nonlinear Programming, Addison-Wesley, 1984.
19. Shaw, M. C., Metal Cutting Principles, Oxford University Press, 1984.
20. Shpitalni, M., Koren, Y., and Lo, C.C., “Realtime Curve Interpolators,” Computer-Aided Design, Vol. 26, No. 11, 1994, pp. 832-838.
21. Suresh, K., and Yang, D.C.H., “Constant Scallop-Height Machining of Free-Form Surfaces,” ASME journal of Engineering for Industry, Vol. 116, 1994, pp. 253-259.
22. Yang, D.C.H., and Kong, T., “Parametric Interpolator Versus Linear Interpolator for Precision CNC Machining, “Computer-Aided Design, Vol. 26, No. 3, 1994, pp. 225-233.
23. Yeung, M.K.., and Walton, D.J., “Curve Fitting with Arc Splines for NC Tool Path Generation,” Computer-Aided Design, Vol. 26, No. 11, 1994, pp. 845-849.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top