|
[1] ARI standard 410-91, 1991, Forced-Circulation Air-Cooling and Air-Heating Coils, Air-Conditioning & Refrigeration Institute, Arlington.
[2] Ware, C.D., and Hacha, T.H., Heat transfer from humid air to fin and tube Extended Surace Cooling Coils, ASME paper 60-HT-17.
[3] Threlkeld, J. L., 1970, Thermal Environmental Engineering, New-York: Prentice-Hall, Inc.
[4] Ｗang,C.C.,Hsieh,Y.C.Chang,Y.J.,and Lin Y. T,."Sensible Heat And Fraction Characteristics of Plate Fin-and-Tube Heat Exchanger," Int.J.of Refriggereation.1997
[5] Ｃhi-Chuan Wang,Chang-Tsair Chang.,"Heat and Mass Transfer for Plate Fin-and-Tube Heat Exchanger,With and Without Hydroplic
[6] McQuiston, F.C., 1975, “Fin Efficiency With Combined Heat and Mass Transfer,” ASHRAE Transactions, 81, part 1, pp. 350-355.
[7] Hong, T. K., and Webb, R. L., 1996, “Calculation of Fin Efficiency for Wet and Dry Fins,” Int. J. HVAC&R Research, 2, No. 1, pp. 27-41.
[8] Chen, L.T., 1991, “Two-dimensional fin Efficiency With Combined Heat and mass Transfer between Water-wetted fin Surface and Moving Moist Airstream,” Int. J. Heat and Fluid Flow, 12, pp. 71-76.
[9] Liang, S.Y., Wong, T.N., and Nathan, G.K., 2000, “Comparison of One-dimensional and two-dimensional Models for Wet-surface fin efficiency of a Plate-fin-tube Heat Exchanger,” Applied Thermal Engineering, 20, pp. 941-962.
[10] Besednjak, A. and Poredoš, A. 1998, “Efficiency of Cooled Extended Surfaces,” Int. J. Refrig., 21, pp. 372-380.
[11] Coney, J.E.R., Kazeminejad, H., and Sheppard, C.G.W., 1989, “Dehumidification of air on a Vertical Rectangular fin: a Numerical Study,” Proc. Inst. Mech. Engrs, J. of Mechanical Engng. Sci, 203, pp. 165-175.
[12] Wu, G., and Bong, T. Y., 1994, “Overall Efficiency of a Straight Fin With Combined Heat and Mass Transfer,” ASHRAE Transactions, 100, part 1, pp. 367-374.
[13] ASHRAE Standard 33-78, 1978, Method of Testing Forced Circulation Air Cooling and Air Heating Coils, Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
[14] ASHRAE Standard 41.1-1986, 1986, Standard Method for Temperature Measurement. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
[15] ASHRAE Standard 41.2-1987, 1987, Standard Methods for LaboratoryAir-flow Measurement. Atlanta American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.
[16] Chilton, T.H., and Colburn, A.P., 1934, “Mass transfer coefficients,” Int. Eng. Chem., 26, pp. 1183-1187.
[17] Coney,J.E.R., Kazeminejad, H., and Sheppard, C.G.W., 1989, “Dehumidification of Turbulent air Flow Over a Thick fin: an Experimental Study,” Proc. Inst. Mech. Engrs, J. of Mechanical Engng. Sci, 203, pp. 177-188.
[18] Coney,J.E.R., Sheppard, C.G.W., and El-Shafei, E.A.M.,1989, “Fin Performance With Condensation From Humid air: a Numerical Study,” Int. J. Heat and Fluid Flow, 10, pp. 224-231.
[19] Elmahdy, A. H., and Biggs, R. C., 1983, “Efficiency of Extended Surfaces With Simultaneous Heat Transfer and Mass Transfer,” ASHRAE Transactions, 89, part 1A, pp. 135-143.
[20] Kandlikar, S.G., 1990, “Thermal Design Theory for Compact Evaporators,” in: Compact Heat Exchangers, R. K., Kraus et al. eds., New York: Hemisphere Publishing Corp. pp. 245-286.
[21] Rosario, L., and Rahman, M.M., 1998, “Overall efficiency of a Radial fin assembly Under Dehumidifying Conditions,” ASME J. of Energy Resources Technology, 120, pp. 299-304.
[22] Rosario, L., and Rahman, M.M., 1999, “Analysis of Heat Transfer in a partially wet Radial fin assembly During Dehumidification,” Int. J. Heat and Fluid Flow, 20, pp. 642-648.
[23] Kazeminejad, H., 1995, “Analysis of One-dimensional fin assembly Heat Transfer With Dehumidification,” Int. J. of Heat and Mass Transfer, 38, pp. 455-462.
[24] Salah El-Din, M.M., 1998, “Performance Analysis of Partially-wet fin Assembly,” Applied Thermal Engng., 18, pp. 337-349.
[25] O’brien, N.G., and Turner, R.L., 1963. “Fin Thermal efficiency During Simultaneous Heat Mass Transfer,” AIChE J.,11,pp. 546-548.
[26] 沈耀明,"放大尺寸之鰭管式熱交換器特性分析,"元智大學機械所碩文,1996
|