(3.238.173.209) 您好!臺灣時間:2021/05/16 21:10
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果

詳目顯示:::

我願授權國圖
: 
twitterline
研究生:艾文傑
研究生(外文):Wen-Jei Ai
論文名稱:三相多功能主動式電力濾波器之研製
論文名稱(外文):Development of Three Phase Multi-Function Active Power Filter
指導教授:林法正林法正引用關係
指導教授(外文):Faa-Jeng Lin
學位類別:碩士
校院名稱:中原大學
系所名稱:電機工程研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2001
畢業學年度:89
語文別:中文
論文頁數:105
中文關鍵詞:三相不平衡主動式電力濾波器並聯式諧波多模組並聯
外文關鍵詞:APFshuntharmonicunbalancedmultiple module paralleled
相關次數:
  • 被引用被引用:4
  • 點閱點閱:141
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本論文旨在研製一多功能且可以多模組並聯之三相主動式
電力濾波器。在功能方面,所提除具備並聯功能外,亦可以補償負載電流之諧波、虛功以及三相電流之不平衡,使輸入電流為平衡、低失真且功率因數為一。在控制方法,本論文結合同步旋轉框演算法與帶通濾波器之諧波電流計算法,使得所提電路即使在電壓失真下亦能維持良好之操作性能。為供應三相不平衡負載,本論文亦提出一瞬時功率法之三相電流平衡控制技術使得輸入電流為平衡。此,本論文亦提出了串聯式負載電流之感測方式,配合三相虛功、諧波電流振幅與三相實功率不平衡之限容控制技術,可以使所提之主動式電力濾波器不需要控制信號連結亦可以多模組並聯使整個濾波系統的容量、可靠度、使用效率均可以有明顯的提高。本論文實際設計並製作一3KVA 之系統,以EMTP 程式模擬及實作結果來驗證所提方法之有效性。
The object of this thesis is to develop a multi-functional active power filter (APF) that can be multi-module parallel operation. The functions include compensation of the load current harmonics, reactive power and three-phase unbalanced currents aiming that the input currents are balanced with low distortion and the input power factor is unity. As for the control method, the synchronous-frame-based algorithm for reactive power compensation combined with the band-pass filter for harmonic current calculation is adopted for achieving a better filtering performance under the distorted voltage supply. A real power compensation technique is also proposed for balancing the unbalanced load currents. The cascaded series load current sensing method accompanying with the capacity-limitation control (including the reactive power capacity, harmonic current amplitude and unbalanced load power limitations) is employed to make multiple APFs can be paralleled without any control interconnection. A 3KVA APF system is implemented, the effectiveness of the proposed methods are proved in terms of some EMTP simulation and experimental results.
中文摘要
英文摘要
致謝
目錄
圖目錄
表目錄
第一章 緒論
1.1 當前電力品質所面臨之問題
1.2 電力諧波之成因與影響
1.3 諧波之改善
1.4 本論文之研究動機
1.5 本論文之內容安排
第二章 並聯式主動電力濾波器之原理
2.1 電流諧波與虛功補償技術
2.2 不平衡負載補償技術
2.3 多模組並聯技術
2.4 本論文所提主動式電力濾波器之控制方法
第三章 主動式電力濾波器之研製
3.1 所提三相三線式系統之架構
3.2 三相三線式變流器之切換控制
3.3 控制器設計
3.4 電壓源變流器之設計
3.5 模擬與實作結果
第四章 所提APF之多組並聯
4.1 所提APF多組並聯技術之原理
4.2 各式限容準位之設定
4.3 模擬結果與分析比較
第五章 結論與未來展望
參考文獻
[1] R. C. Dugan, M. F. McGranaghan, and H. W. Beaty, Electric, PowerSystem Quality. New York: McGraw-Hall, 1996.[2] IEEE Std. 519-1992, IEEE Recommended Practices and Requirementsfor Harmonic Control in Electric Power Systems, New York, 1993.[3] 李廷祥,目前的電力問題:電力品質,第十四屆電力工程研討會演講稿,中華民國八十二年。[4] G. Manchur and C. C. Erven, “Development of a model for predictingflicker from electric arc furnaces,” IEEE Transactions on Power Delivery,vol. 7, no. 1, pp. 416-426, 1992.[5] R. G. Harley and E. B. Makram, “Starting transients of induction motorsconnected to unbalanced networks,” Electric Power System Research, vol.17, pp. 189-197, 1989.[6] P. G. Cummings, “Estimating effect of system harmonics on losses andtemperature rise of squirrel-cage motor,” IEEE Transactions on IndustryApplications, pp. 1121-1126, 1986.[7] W. S. Wood, F. P. Flynn, and A. Poray, “Effects of supply voltagewaveform distortion on motor performance,” Internation Conference onSources and Effects of Power System Disturbances, pp. 261-267, 1974.[8] G. C. Jain, “The effect of voltage waveshape on the performance of athree-phase induction motor,” IEEE Transactions on Power Apparatusand Systems, vol. 4, pp. 561-566, 1984.[9] 江榮城,電力品質實務,全華科技圖書股份有限公司,中華民國八十九年[10] 江榮城,陳士麟,顏士雄,諧波管制標準研擬,台電工程月刊,第526 期,中華民國八十一年。ഊ[11] H. Fujita, H. Akagi, and M. Kohata, “Combined rectifying systemincluding double-series capacitor-smoothed diode rectifier and seriesactive filtering,” IEEE Transactions on Power Electronics, vol. 10, no. 3,pp. 273-279, 1995.[12] G. Blajszczak, “Direct method for voltage distortion compensation inpower networks by series converter filter,” IEE Proceedings of ElectricPower Application, vol. 142, no. 5, pp. 308-312, 1995.[13] R. G. Harley, B.s. Rigby, and G. D. Jennings, “Design of a controlledconverter which emulates a series capacitive compensator for long powerlines,” Proceedings of Power Electronics and Motion Control conference,September, pp. 213-218, 1994.[14] A.Cavallini and G. C. Montanari, “Compensation strategies for shuntactive power control,” IEEE Transactions on Power Electronics, vol. 9,no. 6, pp. 587-593, 1994.[15] Y. Hayashi, N. Sato, and K. Takhashi, “A novel control of a currentsource active filter for ac power system harmonic compensation,” IEEETransactions on Industry Applications, vol. 27, no. 2, pp. 380-384, 1991.[16] V. B. Bhavaraju and P. N. Enjeti, “Analysis and design of an active powerfilter for balancing unbalanced loads,” IEEE Transactions on PowerElectronics, vol. 8, no. 4, pp. 640-647, 1993.[17] M. E. Habrouk, M. K. Ddarwish, and P. Metha, “Active Power Filters: AReview,” IEE Proceedings of Electric Power Application, vol. 147, no. 5,pp. 403-413, 2000.[18] G. Manon, P. Delarue, R. Bausiere, and M. Crappe, “Design of a unifiedpower flow controller for implementation into a micronetwork,”Proceedings of European Power Electronics Conference, Trondheim,Norway, September, pp. 1142-1148, 1997.[19] F. Libano, D. Simonetti, and J. Uceda. “Frequency characteristics of102hybied filter filter system,” in Proceedings IEEE 27 Th Annual PowerElectronics Specialists Conference (PESC), pp. 406-411, 1999.[20] J. Hafner, M. Arades, and K. Heumann, “Utilization of a small ratedshunt active power filter combined with a conventional passive filter forlarge power systems,” IEE Proceedings of Power Electronics and MotionControl Conference, Warsaw, Poland, September, pp. 190-195, 1994.[21] V. Zyl, J. H. R. Enslin, and R. Spee, “A new unified approach to powerquality management,” IEEE Transactions on Power Electronics, vol. 11,pp. 691-697, 1996.[22] S. Bhattacharya, D. Divan, “Active filter solutions for utility interface ofindustrial loads,” in Proceedings of the 1996 International Conference onPower Electronics, Drives and Energy Systems for Industrial Growth, vol.2, pp. 1078-1084, 1996.[23] A. Cavallini and G. C. Montanari, “Compensation strategies for shuntactive-filter control, ” IEEE Transactions on Power Electronics, vol. 9, no.6, pp. 587-593, 1994.[24] J. Afonso, C. Couto, and J Martin, “Active filters with control based onthe p-q theory,” IEEE Industrial Electronics Society Newsletter, pp. 5-11,2000.[25] E. H. Watanabe, R. M. Stephan, and M. Aredes, “New concepts ofinstantaneous active and reactive powers in electrical systems withgeneric loads,” IEEE Transactions on Power Delivery, vol. 8, no. 2, pp.697-703, 1993.[26] H. Shirahama and P. T. Cheng, “Instantaneous control method with aGTO converter for active powers in superconduction magnetic energystorage,” IEEE Transactions on Power Electronics, vol. 9, no. 1, pp. 1-6,1994.[27] G. C. Cho, G. H. Jung, N. S. Choi, and G. H. Cho, “Analysis andഊcontroller design of static VAR compensator using three-level GTOinverter,” IEEE Transactions on Power Electronics, vol. 11, no. 1, pp.57-65, 1996.[28] B. Ooi and S. Dai, “Series type solid state ststic VAR compensator,”IEEE Transactions on Power Electronics, vol 8 no. 2, pp. 308-312, 1993.[29] T. Furuhashi, S. Okuma, and Y. Uchikawa, “A study on the theory ofinstantaneous reactive power,” IEEE Transactions on IndustrialElectronics, vol. 37, no. 1, pp. 86-90, 1990.[30] H. L. Jou, “Performance comparison of the three-phase active powerfilter algorithms Generation,” IEE Proceedings of Transmission andDistribution, vol. 142, no. 6, pp. 646-652, 1995.[31] S. Bhattacharya and D. Divan, “Synchronous frame based controllerimplementation for a hybrid series active filter system,” in ProceedingsIEEE 30 Th Annual Meeting Industry Applications Conference, (IAS), vol.3, pp. 2531-2540, 1995.[32] A. Cavallini and G. C. Montanari, “Compensation strategies for shuntactive filter control,” IEEE Transactions on Power Electronics, vol. 9, no.6, pp. 587-593, 1994.[33] G. Blajzczak, “Non-active power compensation using time-windowmethod,” Eur. Transactions on Power Eng, vol. 2, no. 5, 1996.[34] W. Koczara, S. Greethham, and L. Hoydock, “An investigation of theharmonics and reactive power in a single phase system using an adaptivefilter, ” Proceedings of Power Electronics and Motion Control conference.(PEMC), Warsaw, Poland, pp. 196-201, 1994.[35] M. Ei-Habrouk, “A new configuration for shunt active filters,” PhDthesis. Department of Electrical Engineering and Electronics. BrunlUniversity, UK, 1998.[36] S. Bhattacharya, A. Veltman, D. M. Divan, and R. D. Lorenz, “Flux104based active filter controller,” in Proceedings IEEE 30 Th Annual MeetingIndustry Applications Conference (IAS), vol. 3, pp. 2483-2491, 1995.[37] L. Shiguo and H. Zhencheng, “An adaptive detecting method forharmonic and reactive currents,” IEEE Transactions on IndustrialElectronics, vol. 42, no. 1, pp. 85-89, 1995.[38] J. F. Chicharo and H. Wang, “Power system harmonic signal estimationand retrieval for active power filter applications,” IEEE Transactions onPower Electronics, vol. 9, no. 6, pp. 580-586, 1994.[39] J. W. Dixon, J. J. Garcia, and L. Moran, “Control system for three-phaseactive power filter which simultaneously compensates power factor andunbalanced loads,” IEEE Transactions on Industrial Electronics, vol. 42,no. 6, pp. 636-641, 1995.[40] U. B. Jensen, P. N. Enjeti, and F. Blaabjerg, ”A new space vector basedcontrol method for UPS systems powering nonlinear and unbalancedloads,” in Proceedings IEEE 15 Th Annual Meeting Power ElectronicsConference and Exposition Conference (APAC), vol. 2, pp. 895-901,2000.[41] P. Verdelho and G. D. Marques, “An active power filter and unbalancedcurrent compensator,” IEEE Transactions on Industrial Electronics, vol.44, no. 3, pp. 321-328, 1997.[42] V. B. Bhavaraju and P. N. Enjeti, “Analysis and design of an activepower filter for balancing unbalanced loads,” IEEE Transactions onPower Electronics, vol. 8, no. 4, pp. 640-647, 1993.[43] S. J. Chiang and J. M. Chang, “Design and implementation of theparallelable active power filter,” in Proceedings IEEE 31 ST Annual PowerElectronics Specialists Conference (PESC), vol. 1, pp. 406-411, 1999.[44] L. Mora’n, P. Godoy, R. Wallace, and J. Dixon, “A new current controlstrategy for active power filters using three PWM voltage sourceഊinverters,” in Proceedings IEEE 24 Th Annual Power ElectronicsSpecialists Conference (PESC) pp. 3-9, 1993.[45] L. Moran, L. Fernandez, J. Dixon, and R. Wallace, “A simple and low-costcontrol strategy for active power filters connected in cascade,” IEEETransactions on Industrial Electronics, vol. 44, no. 5, pp. 621-629, 1997.[46] P. Z. Fang, Jr G. W. Ott, and D. J. Adams, “Harmonic and reactive powercompensation based on the generalized instantaneous reactive powertheory for three-phase four-wire systems,” IEEE Transactions on PowerElectronics, vol. 13, no. 6, pp.1174-1181, 1998.[47] S. Luo, Z. Ye, R. L. Lin, and F. C. Lee, “A classification and evaluationof paralleling methods for power supply modules,” in Proceedings IEEE30 Th Annual Power Electronics Specialists Conference (PESC), Vol. 2, pp.901-908, 1999.[48] A. Tuladhar, H. Jin , T. Unger and K. Mauch, “Parallel operation ofsingle-phase inverter modules with no control interconnections,” inProceedings IEEE Applied Power Electronics Conference and Exposition(APEC), Vol. 1, pp. 94-100, 1997.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top