跳到主要內容

臺灣博碩士論文加值系統

(54.92.164.9) 您好!臺灣時間:2022/01/23 04:54
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:林勝智
論文名稱:晶圓代工廠可能延遲批量之替代途程選擇
論文名稱(外文):Selcetion of Alternative Routing for Possibly Delayed Lots in IC Foundry
指導教授:巫木誠巫木誠引用關係
學位類別:碩士
校院名稱:國立交通大學
系所名稱:工業工程與管理系
學門:工程學門
學類:工業工程學類
論文種類:學術論文
論文出版年:2002
畢業學年度:90
語文別:德文
論文頁數:56
中文關鍵詞:生產週期時間即時監控批量管制時程替代途程
外文關鍵詞:Cycle TimeLot Control ScheduleRoute Change
相關次數:
  • 被引用被引用:0
  • 點閱點閱:201
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:1
半導體製程較為複雜且製造現場常發生不可預期的事件,使得產品的生產週期時間不易管理。目前較常見之週期時間管理方法多為長期規劃,這類方法主要是靠資料之分析來進行初期之規劃,對於製造現場所發生的不可預期事件較無法即時管理。
本研究目的在於建立一套即時生產週期時間的改善機制;引用批量管制時程來對批量進行即時監控,並提出一個即時的替代途程評估機制來衡量是否轉換途程可以得到週期時間之改善。模擬的結果顯示,本研究提出之替代途程評估機制在預設延遲批量較少的情況下可以得到相當不錯的改善績效,達到對延遲做即時反制、降低週期時間的目的。

In semiconductor manufacturing, some manufacturing operations may be performed by different routes. In order to improve the on-time delivery of IC foundries, this research develops a method for the possibly delayed lots in the decision-making of changing routes. A lot is identified as a possibly delayed one whenever its progress of manufacturing is behind its lot control schedule. The lot control schedule defines the target progress of each operation of the lot. For a particular possibly delayed lot, facing the choice of two alternative routes, the lot is assigned to take the route where all the lots in the route that are possibly delayed have shorter cycle time. That is, if the lot is dispatched to a route, it may increase the cycle time of all the other lots in the route and may become possibly delayed ones. The cycle time of all these lots in a route can be computed by a method developed in this research. Simulation results show that the proposed method for changing routes can effectively improve on-time delivery when the percentage of planned delayed lots is low (10%), and cannot work well when the percentage of planned delayed lots is relatively high (15%).

中文摘要………………………………………………………………Ⅰ
英文摘要………………………………………………………………Ⅱ
致謝……………………………………………………………………Ⅲ
目錄……………………………………………………………………Ⅳ
表目錄…………………………………………………………………Ⅵ
圖目錄…………………………………………………………………Ⅶ
第一章 緒論……………………………………………………………1
1.1研究背景與動機……………………………………………………………1
1.2問題定義與研究目的………………………………………………………2
1.3研究步驟與流程……………………………………………………………5
第二章 文獻回顧………………………………………………………7
2.1替代途程之規劃問題………………………………………………………7
2.2目前晶圓代工廠之現況…………………………………………………10
2.3無附加價值活動即時管理系統…………………………………………11
2.3綜合比較與結論…………………………………………………………14
第三章 研究方法……………………………………………………16
3.1研究構想…………………………………………………………………16
3.2研究架構…………………………………………………………………18
3.2.1基本假設………………………………………………………………18
3.2.2警戒線系統……………………………………………………………18
3.2.3本研究之輸入資料……………………………………………………19
3.2.4替代途程選擇機制……………………………………………………21
3.2.5模擬驗證模組…………………………………………………………21
3.3即時估算週期時間機制…………………………………………………22
3.3.1採用途程評估機制之時點……………………………………………22
3.3.1即時週期時間估算法…………………………………………………22
第四章 實例驗證………………………………………………………28
4.1基本環境說明……………………………………………………………28
4.2系統環境設定……………………………………………………………29
4.3模擬驗證結果……………………………………………………………30
4.3.1採用FIFO之模擬結果………………………………………………30
4.3.2採用曾氏派工法則之模擬結果…………………………………….34
4.4結果分析…………………………………………………………………35
第五章 實例驗證………………………………………………………37
5.1結論………………………………………………………………………37
5.2建議………………………………………………………………………37
參考文獻……………………………………………………………39

〔1〕P. L. Chang, Y. C. Chou , M. G. Huang “Analytic approximations for multiserver batch-service workstation with multiple process recipes in semiconductor wafer fabrication” IEEE transaction on semiconductor manufacturing vol.14, No.4, 395-405, 2001
〔2〕S. K. Das and Prashanth Nagendra, “Selection of routes in a flexible manufacturing facility” International Journal Production Economics 48 237-247, 1997
〔3〕F. Guerrero, S. Lozano, T. Kolta, J. Larraneta “Machine loading and part type selection in flexible manufacturing systems” International Journal Production Research vol.37, No.6, 1303-1317, 1999
〔4〕H. Hwang and P. Ree “Routes selection for the cell formation problem with alternative part process plans” Computer industry. Engineering Vol.30, No.3, 423-431, 1996.
〔5〕G. Jeon, H. R. Leep and H. R. Parsaei “A celluar manufacturing system based on new similarity coefficient which considers alternative routes during machine failure” Computer industry. Engineering Vol.34, No.1, 21-36, 1998.
〔6〕G. Jeon, M. Broering, H. R. Leep, H. R. Parsaei, J. P. Wong ”Part family formation based on alternative routes during machine failure” Computer industry. Engineering Vol.35, No.1-2, 73-76, 1998
〔7〕 K. H. Kim, and P. J. Egbelu, “A mathematical model for job shop scheduling with multiple process plan consideration per job” Production Plan & Control vol. 9, No.3, 250-259, 1998
〔8〕S. Lozano, F. Gguerrero, I. Eguia and L. Onieva, “Cell design and loading in the presence of alternative routing” International Journal Production Research vol.37, No.14, 3289-3304, 1999
〔9〕J. Miltenburg “Production planning problem where products have alternative routings and bills-of-material” International Journal Production Research , vol. 39, No. 8, 1755-1775, 2001.
〔10〕K. Shanker and B. K. Modi “A branch and bound based heuristic for multi-product resource constrained scheduling problem in FMS encironment” European Journal of Operation Research 113 80-90, 1999
〔11〕S. Sofianopoulou² “Manufavturing cell design with alternative process planning and/or replicate machines ” International Journal Production Research , vol. 37, No. 3, 707-720, 1999.
〔12〕 甘志偉 , “晶圓代工廠生產週期時間管理導向製造執行系統架構” , 交通大學工業工程研究所碩士論文 , 2000
〔13〕 朱文東 , “晶圓代工廠無附加價值活動之即時管理系統” , 交通大學工業工程研究所碩士論文 , 2001
〔14〕 林時龍 , “晶圓廠短期動態機台調整機制” , 交通大學工業工程研究所碩士論文 , 2001
〔15〕 劉其昌 , “晶圓廠生產現場進度管制線之設定” , 交通大學工業工程研究所研究報告書 , 2001
〔16〕 曾文揚 , “晶圓廠短期動態機台調整機制” , 交通大學工業工程研究所碩士論文 , 2002
〔17〕 蕭慧馨 , “Pacemaker程式之構建程序” , 交通大學工業工程研究所碩士論文 , 1998
〔18〕 http://www.paragonms.com
〔19〕 http://www.tecnomatix-unicam.com.sg
〔20〕 http://www.autosim.com

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top