跳到主要內容

臺灣博碩士論文加值系統

(54.224.117.125) 您好!臺灣時間:2022/01/28 20:32
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:周昭男
研究生(外文):Chao-Nan Chou
論文名稱:鐵-8.0鋁-28.5錳-(5,10)鉻合金相變化
論文名稱(外文):Phase transformations in Fe-8.0Al-28.5Mn-(5,10)Cr alloys
指導教授:劉增豐
指導教授(外文):Tzeng-Feng Liu
學位類別:碩士
校院名稱:國立交通大學
系所名稱:材料科學與工程系
學門:工程學門
學類:材料工程學類
論文種類:學術論文
論文出版年:2002
畢業學年度:90
語文別:英文
論文頁數:74
中文關鍵詞:鐵錳鋁鉻
外文關鍵詞:Fe-Mn-Al-Cr
相關次數:
  • 被引用被引用:4
  • 點閱點閱:130
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
在本論文中,我們利用穿透式電子顯微鏡以及X光能量散佈分析儀研究在鐵- 8.0鋁-28.5錳合金中添加 5.0和10.0鉻的相變化。在淬火狀態下,添加5.0鉻的合金中,其顯微結構為沃斯田鐵和肥粒鐵之雙相,而添加10.0鉻的合金之淬火顯微結構為單一肥粒鐵相。將合金做時效處理,在沃斯田鐵基地中均無析出物,而在肥粒鐵基地中隨著不同時效溫度會有不同析出物產生。當此二合金在350℃至450℃之間做時效處理時,規律的D03和A12 α-錳相皆可在肥粒鐵基地中被發現。除此之外,在高溫時效後,A13 b-錳析出物亦可在兩合金中被觀察到。在這二個合金中,發現隨著時效溫度的增加,在肥粒鐵相內之相變化均為 (α + A12 α-Mn + D03) → (α + A12 α-Mn) → (α + A13 β-Mn) → α 。 儘管這兩個合金的顯微結構變化順序是一樣的,但是由實驗結果可清楚知道,隨著鉻含量的增加,D03和A12 α-錳相皆可存在至更高的溫度。

Phase transformations in Fe- 8.0 wt. % Al -28.5 wt. % Mn alloy with 5.0 and 10.0 wt. % Cr have been investigated by means of optical microscopy, scanning transmission electron microscopy and energy-dispersive X-ray spectrometey. In the as-quenched condition, the microstructure in the Fe- 8.0 wt. % Al- 28.5 wt. % Mn-5.0 wt. % Cr alloy was a (ferrite) + g (austenite) duplex phases and only single a phase could be found in the Fe- 8.0 wt. % Al- 28.5 wt. % Mn-10.0 wt. % Cr alloy. When the Fe- 8.0 wt. % Al- 28.5 wt. % Mn-5.0 wt. % Cr alloy was aged at various temperatures, no precipitates could be found within the austenite matrix. However, different kinds of precipitates could be formed within the ferrite grains with increasing the aging temperature. When both alloys were aged at temperatures ranging from 350°C to 450℃, both ordered D03 and A12 α-Mn phases could be observed within the ferrite matrix. In addition to the D03 and A12 a-Mn phases, A13 b-Mn precipitates could also be found in both alloys aged at higher temperatures. In these two alloys, the phase transformation sequences in the ferrite grains as the aging temperature increased were found to be (α + A12 α-Mn + D03) → (α + A12 α-Mn) → (α + A13 β-Mn) → α. In spite of having the same microstructural developments in these two alloys, experimental results indicated that the existing temperatures of both the D03 and A12 a-Mn phases were increased with increasing the Cr content.

ABSTRACT(Chinese)……………………………..…………..1
ABSTRACT(English)……………………………..…………...2
CONTENT……………………………………………………..4
LIST OF FIGURES……………………………….…………...5
LIST OF TABLES……………………………….…………...9
INTRODUCTION…………………………………………….10
EXPERIMENTAL PROCEDURE………….……….………13
RESULTS…………………………………………….…….…15
DISCUSSION………………………………………..………..27
CONCLUSIONS………………………….……………….31
REFERENCES…………………………….………………….32

H. C. J. WANG. C. M. WAN and B. S. CHIOU. Ibid. p. 291.
14. C. J. WANG and J. G. DUH. J. Mater. Sci. 23 (1988) 2913.
15. Idem. Ibid. 23 (1988) 3447.
16. J. G. DUH. J. W. LEE. And C. J. WANG. Ibid. 23 (1988) 2649.
17. J. G. DUH. And C. J. WANG, ibid. 25 (1990) 268.
18. Idem. Ibid. 25. (1990) 2063.
19. J. C. Garcia, N. Rosas and R.J. Rioja: Met. Prog., Aug. (1982) 47~50.
20. C. J. Altstetter, A.P. Bentley, J.W. Fourie and A.N. Kirkbride: Mater. Sci. Eng., 82 (1986) 13~25.
21. R. Wang and F.H. Beck: Met. Prog., Mar. (1983) 72~76.
22. D.J. Schmatz: Trans. ASM, 52 (1960) 898~910.
23. W. Köster and W. Tonn., Arc Eisenhuettenw, 7, (1933) 365
24. D. S. Stone, K. B. Yodev, J. Mater. Res. 9 (1994) 2524.
25. V. K. Sikka, R. H. Baldwin, J. H. Resinshagen, J. R. Knibole, R. N. Wright, Mater. Res. Soc. Sym. Proc. 213 (1991) 901.
26. Y. Nishinno, A. Asano, T. Ogawa, Mater. Sci. Eng. 234 (1997) 271.
27. Young S. Han, Soon H. Hong, Science and Engineering A222 (1997) 76-83.
28. J. H. Westbrook, Trans. Am. Soc. Met. 45 (1953) 221.
29. A. G. Atkins, Met. Sci. 16 (1982) 127.
30. E. E. Underwood, Mater. Methods 45 (1957) 127.
31. Y. G. Kim, Y. J. Park and J. K. Han. Metall. Trans. A,16 (1985) 1689.
32. J. Charles, A. Berghzan, A. Lutts and P. L. Dancoisne, Met. Prog., May (1981) 71.
33. C. J. Lin, M. T. Liao. J. Mater. Sci., April (1993) 6007~6012.
34. T. F. Liu and C. M. Wan, Scripta Metallurgical, Vol. 19, pp. (1985) 805~810.
35. T. F. Liu and J. C. Tasy, Scripta Metallurgical, Vol. 21, pp. (1987) 1213~1218.
36. T. F. Liu and C. M. Wan, Scripta Metallurgical, Vol. 23, pp. (1989) 1243~1248.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top