跳到主要內容

臺灣博碩士論文加值系統

(54.83.119.159) 您好!臺灣時間:2022/01/17 08:25
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:黃達海
研究生(外文):Ta-Hai Huang
論文名稱:孔於長刀桿切削下不規則輪廓成形之理論
論文名稱(外文):A Theory to the Formation of Irregular Profile in Hole Making with Long Tool Shaft
指導教授:秦繼華秦繼華引用關係
指導教授(外文):Jih-Hua Chin
學位類別:碩士
校院名稱:國立交通大學
系所名稱:機械工程系
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2001
畢業學年度:90
語文別:英文
論文頁數:108
中文關鍵詞:多邊孔形
外文關鍵詞:multi-cornered shape
相關次數:
  • 被引用被引用:0
  • 點閱點閱:216
  • 評分評分:
  • 下載下載:36
  • 收藏至我的研究室書目清單書目收藏:0
從過去的文獻中,我們發現幾乎沒有較嚴格的運動公式描述在長刀桿的切削狀況下,不規則孔形的成形原因。建立在一些理論的分析,這篇論文架構了一個統御方程式為了探求在深孔鑽中多邊孔形的形成原因。藉由模擬統御方程式,我們展現出整個的切削過程發現多邊孔形形成的原因與夾頭(chuck)上的爪數有關,也就是說,多邊孔形的邊數等於夾頭上的爪數。這個現象應該是由被富里葉級數(Fourier series)展開後簡諧徑向切削力所導致。這個結果不同於較早的一些究研只有觀察被加工工件的某單一截面而較不具上述結果的說服力,也因此沒有被歸納成結論。另一個重要的結果是系統共振的發生只有當轉述接近其各階自然頻率的1/n,此處,n代表爪數,且當轉速越接近自然頻率,多邊孔形越明顯。這個結果在可接受的公差內對不同長度刀桿作切削速度選擇最佳化。

Literatures investigation revealed that there is no rigorous dynamic equation for making a description of formation of irregular profile in a machined hole with a long tool shaft. Based on some theoretical analysis, this paper constructed a governing equation to search for the formation of irregular profile in hole making. By simulating the governing equation, the entire cutting processes are shown to interpret the number of multi-cornered shape is related to the number of jaws on the chuck, i.e., n-cornered shape is caused by n-jaw chuck. The phenomenon can be resulted from the harmonic radial cutting force expanded as Fourier series. This result is different from some earlier researches just observing a certain cross-section in a cylindrical machined workpiece. Another important outcome is resonance occur only if the spindle speed approaches the 1/n of natural frequencies, where n is the number of jaws on the chuck. And the multi-cornered shape get more prominent when the spindle is closer to the 1/n of natural frequencies, therefore, we can optimize the cutting speed within an acceptable tolerance for various length of tool shaft.

Chapter 1 Introduction 1
Chapter 2 Derivation of Mathematical Formula 7
2.1Inference of the radial cutting force for the chuck with a various number of jaws 7
2.2Establishment of the governing equation 12
Chapter 3 Simplification of the governing equation 17
3.1Simplification of the radial cutting force 17
3.2Simplification of system 19
Chapter 4 Solution for the governing equation 32
Chapter 5 Simulation and Discussion 38
5.1Influence of the length of the drill tube and spindle speed for the quality of machined hole 39
5.2Relation between irregularity of the machined hole and the number of jaws on the chuck 41
Chapter 6 Conclusion 95
Reference 96
Appendix A 98
Appendix B 105

[1] Kahng, C. H., Lord, H. W. and Davis, T. L., “The Effect of Chucking Methods on Roundness Error in the Boring Process”, Transactions of the ASME, Journal of Engineering for Industry, Vol. 98, No. 1, pp. 233-238, 1976.
[2]Rahman, M. and ITO, Y., “Machining Accuracy of a Cylindrical Workpiece Held by a Three-Jaw Chuck”, Bull. Japan Soc. of Prec. Engg., Vol. 13, No.1, pp. 7-12,1979.
[3]Martin, M. A. and Rahman, M., “Analysis of the Cutting Process of a Cylindrical Workpiece Clamped by a Three-Jaw Chuck”, ASME Journal of Engineering for Industry, Vol. 110, No. 4, pp. 326-332, 1988.
[4]Rahman, M., Matin, M. A., Seah, K. H. W., “A Study of the Vibrational Dynamics of an Endrill Clamped by Side-Locking”, ASME Journal of Engineering for Industry, Vol. 115, pp. 438-443, 1993.
[5]Endres, W J., Sutherland, J. W., DeVor, R. E., and Kapoor, S. G., “a Dynamic Model of the Cutting Force System in the Turing Process”, ASME, PED-44, Monitoring and Control For Manufacturing process, pp. 193-212, 1990.
[6]Zill, D. G., and Cullen M. R., “Advance Engineering Mathematics”, PWS-KENT, R.O.C., 1992.
[7]Sakuma, K., Taguchi, K. and Katsuki, A, “Self-Guiding Action of Deep-Hole-Drilling Tools”. Ann. CIRP 30, pp. 311-315, 1981.
[8]Sakuma, K., Taguchi, K., and Katsuki, A., “Study on Deep-Hole Boring by BTA System Solid Boring Tool―Behavior of Tool and Its Effects on Profile of Machined Hole.” Bull. Japan Soc. of Prec. Engg., Vol. 14, No. 3, pp. 143-148, 1980.
[9]Gessesse, Y B., Lationvic, V. N., Osman, M. O. M., “On the Problem of Spiralling in BTA Deep-Hole Machining”, ASME Journal of Engineering for Industry, Vol. 116, pp. 161-165, 1994.
[10]Griffiths, B. J., “Modelling Complex Force Systems, Part 1: The Cutting and Pad Forces in Deep Drilling”, ASME Journal of Engineering for Industry, Vol. 115, pp.169-176, 1993.
[11]Clark, S. K., Dynamics of Continuous Elements, Prentice-Hall, Englewood Cliffs, N.J., 1972.
[12]Timoshenko, S, Young, D. H., and Weaver, W., Jr., “Vibration Problems in Engineering (4th ed.)”, Wiley, New York, 1974.
[13]Rao, S. S., ”Mechanical vibrations (3rd ed.)”, Addison-Wesley P. C., inc. (October, 1995)
[14]Yumshtyk, M. G. and Kedrov, S. S., “Gun Drill Vibration in Deep Drilling. Machines & Tooling Vol. 39, pp. 34-36, 1968.
[15]Blevins, R, D., Flow-Induced Vibration, Chapter 10. Krieger Publ, 1986.
[16]Yoshizawa, M. et al. Buckling and Postbuckling Behavior of a Flexible Pipe Conveying Fluid. Bull. JSME Vol. 28, pp. 1218-1225,1985.
[17]Edelstein, W. S., Chen, S. S. and Jendrzejczyk, J. A., “A Finite Element Computation of the Flow-Induced Oscillations in a Cantilevered Tube”, J. Sound Vibration, Vol.107, pp. 121-129, 1986.
[18]Chin, J. H. and Lee, L. W., “A Study on the Tool Eigenproperties of BTA Deep Hole Drill―Theory and Experiments”. Int. J. Machine Tools and manufacturing, Vol. 35, No. 1, pp. 29-49, 1994.
[19]Chin, J. H. and Hsieh, C. T. and Lee, L. W., “The Shaft Behavior of BTA Deep Hole Drilling Tool”. Int. J. Mech. Sciences. Vol. 38, No. 5, pp. 461-482, 1996.
[20]Bauer, H. F., “Vibration of a Rotating Uniform Beam, Part I: Orientation in the Axis of Rotation,” Journal of Sound and Vibration, Vol. 72, pp. 177-189, 1980.
[21]Zu, Jean W.Z. and Han, Ray P. S., “Natural Frequencies and Normal Modes of a Spinning Timoshenko Beam with General Boundary Conditions, ASME. Journal of Applied Mechanics, Vol. 59, s197-s204, 1992.
[22]Perng Y. L., “A Study on the Properties of Rotating BTA Drill Shaft”, Phd thesis, Institute of Mcchincal Engineering, National Chiao-Tung University., Taiwan, R.O.C, May, 2001.
[23]Pipes, L. A., and Harvill, L. R., “Applied Mathematics for Engineers and Physicists”, third edition, McGraw-Hill Kogakusha, Ltd., R.O.C, 1970.

QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top