跳到主要內容

臺灣博碩士論文加值系統

(100.26.196.222) 您好!臺灣時間:2024/02/23 08:10
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:林再福
研究生(外文):Tsai-Fu Lin
論文名稱:複金屬燈特性研究及電子安定器設計
論文名稱(外文):Operating Characteristics and Ballast Design of Metal Halide Lamps
指導教授:莫清賢莫清賢引用關係
指導教授(外文):Chin-Sien Moo
學位類別:博士
校院名稱:國立中山大學
系所名稱:電機工程學系研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2002
畢業學年度:90
語文別:中文
論文頁數:126
中文關鍵詞:保護電路高功因電子安定器音頻共振複金屬燈定功率
外文關鍵詞:protection circuitconstant power operationhigh power factoracoustic resonanceMetal halide lampelectronic ballast
相關次數:
  • 被引用被引用:20
  • 點閱點閱:373
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
封面
中文摘要
英文摘要
目錄
圖表目錄
符號表
第一章簡介
1-1研究動機
1-1-1複金屬燈
1-1-2電磁耦合安定器與電子安定器
1-1-3 功因修正電路
1-1-4單級高功因電子安定器
1-2論文大綱
第二章複金屬燈特性探討
2-1發光特性
2-2 暫態過渡現象
2-3 穩態工作特性
2-3-1燈管功率對燈管特性之影響
2-3-2使用時數對燈管特性之影響
第三章音頻共振
3-1音頻共振燈管特性
3-2音頻共振頻率分佈
3-2-1相異燈管的頻率分佈
3-2-2使用時數的影響
3-2-3燈管功率的影響
3-3避免音頻共振的方法
3-3-1定頻操作之電子安定器
3-3-2低頻方波驅動之電子安定器
第四章熱點燈
4-1熱點燈之對策
4-2 兩級升壓式高電壓點火電路
4-3 單級高電壓點火電路
第五章泛用電源之高功因定功率電子安定器
5-1電路架構
5-2工作原理
5-3電路特性分析
5-4應用實例及量測
第六章單級高功因可熱點燈電子安定器
6-1電路架構
6-2工作原理
6-3電路分析
6-4應用實例及量測
6-5保護電路與多燈操作
第七章結論與未來研究方向
參考文獻
[1]IES Lighting Handbook, Reference and Application, Illuminating Engineering Society of North America, 8th Edition, 1995.
[2]POWERSTAR HOI-T and HQI-TS compact metal-halide lamps, Technical information, OSRAM company, 1997.
[3]M. Sugiura, “Review of Metal-Halide Discharge-Lamp Development 1980-1992,” IEE Proceedings-Science, Measurement and Technology, Vol. 140, Pt. A, No. 6, pp. 443-449, Nov. 1993.
[4]R. G. Gibson, “Dimming of Metal Halide Lamps,” Journal of the Illuminating Engineering Society, pp. 19-25, Summer 1994.
[5]N. Fukumori, H. Nishimura, K. Uchihashi, and M. Fukuhara, “A Study of HID Lamp Life when Operated by Electronic Ballasts,” Journal of the Illuminating Engineering Society, pp. 41-47, Winter 1995.
[6]W. Pabst and D. Klien, “Igniting High-Pressure Lamps with Electronic Ballasts,” Journal of the Illuminating Engineering Society, pp. 14-20, Summer 1992.
[7]I. K. Lee, S. J. Choi, K. C. Lee, and B. H. Cho, “Modeling and Control of Automotive HID Lamp Ballast,” IEEE International Conference on Power Electronics and Drive Systems, pp. 506-510, July 1999.
[8]T. R. Chen, J. J. Cheh, Te C. Chen, J. W. Lin, and J. B. Chen, “Implementation of Dimmable Electronic Ballast for High Pressure Sodium Lamp,” 19th Symposium on Electrical Power Engineering, Taipei, Taiwan, pp. 1068-1072, 1998.
[9]XBO Xenon Short Arc Lamps, OSRAM Berlin-Munich Germany, 1978.
[10]A. R. Prasad, P. D. Ziogas, and S. Manlas, “A Novel Passive Waveshaping Method for Single-Phase Diode Rectifiers,” IEEE Transactions on Industrial Electronics, Vol. 37, No. 6, pp. 521-530, Dec. 1990.
[11]J. Olsen and W. P. Moskowitz, “Time Resolved Measurements of HID Lamp Acoustic Frequency Spectra,” IEEE Industry Applications Society Annual Meeting, pp. 2111-2116,1998.
[12]H. L. Witting, “Acoustic Resonances in Cylindrical High-Pressure Arc Discharges,” 1978 American Institute of Physics, pp. 2680-2683, May 1978.
[13]S. Wada, A. Okada, and S. Morri, “Study of HID Lamps with Reduced Acoustic Resonances,” Journal of the Illuminating Engineering Society, pp. 162-175, Winter 1987.
[14]H. Peng, S. Ratanapanachote, P. Enjeti, L. Laskai, and I. Pitel, “Evaluation of Acoustic Resonance in Metal Halide (MH) Lamps and An Approach to Detect Its Occurrence,” IEEE Industry Applications Society Annual Meeting, pp. 2276-2283, Oct. 1997.
[15]Requirements for Ignitors for Xenon Lamps, OSRAM Munich Germany, 1978.
[16]T. F. Lin, C. S. Moo, M. J. Soong, W. M. Chen, and C. R. Lee, “A High-Power-Factor Electronic Ballast for Metal Halide Lamps with Hot Restarting,” IEEE International Conference on Industrial Electronics Control and Instrumentation, pp. 2261-2266, 2000.
[17]W. M. Keeffe, “Recent Progress in Metal Halide Discharge-Lamp Research,” IEE Proceedings-Instrument Electric Engineering, Vol. 127, Pt. A, No. 3, pp 181-189, April 1980.
[18]E. Rasch and E. Statnic, “Behavior of Mental Halide Lamps with Conventional and Electronic Ballast,” Journal of the Illuminating Engineering Society, pp. 88-96, Summer 1991.
[19]W. R. Alling, “Important Design Parameters for Solid-State Ballasts,” IEEE Transactions on Industry Applications, Vol. 25, No. 2, pp. 203-207, Mar./Apr. 1989.
[20]H. J. Faehnrich and E. Rasch, “Electronic Ballasts for Metal Halide Lamps,” Journal of the Illuminating Engineering Society, pp. 131-140, Summer 1988.
[21]E. J. P. Mascarenhas, “Applications of Electronic Circuits in Lighting,” IEE Proceedings-Science, Measurement and Technology, Vol. 140, Pt. A, No. 6, pp. 435-442, Nov. 1993.
[22]M. C. Cosby and R. M. Nelms, “A Resonant Inverter for Electronic Ballast Applications,” IEEE Transactions on Industrial Electronics, Vol. 41, No. 4, pp. 418-425, Aug. 1994.
[23]W. W. Byszewski, A. B. Budinger, and Y. M. Li, “HID Starting: Glow Discharge and Transition to the Thermionic Arc,” Journal of the Illuminating Engineering Society, pp. 3-9, Summer 1991.
[24]G. Zaslavsky, S. Cohen, and W. Keeffe, “Improved Starting of the 100-W Metal Halide Lamp,” Journal of the Illuminating Engineering Society, pp. 76-83, Summer 1990.
[25]T. J. Liang, K. H. Su, and W. H. Fu, “High Frequency Electrical Circuit Model of Metal-Halide Lamp,” IEEE Applied Power Electronics Conference and Exposition, pp. 1163-1167, 1998.
[26]M. C. Cosby and R. M. Nelms, “A Resonant Inverter for Electronic Ballast Applications,” IEEE Transactions on Industrial Electronics, Vol. 41, No. 4, pp. 418-425, Aug. 1994.
[27]R. Severns, “Topologies for Three-Element Resonant Converter,” IEEE Transactions on Power Electronics, Vol. 7, No. 1, pp.89-98, Jan. 1992.
[28]B. L. Hesterman and T. M. Poehlman, “A Novel Parallel-Resonant Programmed Start Electronic Ballast,” IEEE Industry Applications Society Annual Meeting, pp.249-255,Oct. 1999.
[29]M. Gulko and S. Ben-Yaakov, “Current-Sourcing Push-Pull Parallel-Resonance Inverter (CS-PPRI): Theory and Application as a Discharge Lamp Driver,” IEEE Transactions on Industrial Electronics, Vol. 41, No. 3, pp. 285-291, June 1994.
[30]P. K. Jain, A. St-Martin, and G. Edwards, “Asymmetrical Pulse-Width-Modulated Resonant DC/DC Converter Topologies,” IEEE Transactions on Power Electronics, Vol. 11, No. 3, pp. 413-422, May 1996.
[31]R. L. Steigerwald, “A Comparison of Half-Bridge Resonant Converter Topologies,” IEEE Transactions on Power Electronics, Vol. 3, No. 2, pp. 174-182, April 1988.
[32]Y. G. Kang, A. K. Upadhyay, and D. L. Stephens, “Analysis and Design of a Half-Bridge Parallel Resonant Converter Operating Above Resonance,” IEEE Transactions on Industry Applications, Vol. 27, No. 2, pp. 386-395, March/April 1991.
[33]R. L. Steigerwald, “A Comparison of Half-Bridge Resonant Converter Topologies,” IEEE Transactions on Power Electronics, Vol. 8, No. 4, pp.386-395, Oct. 1993.
[34]M. K. Kazimieroczuk, “Class D Voltage-Switching MOSFET Power Amplifier,” IEE Proceedings-Electric Power Application, Vol. 138, Pt. B, No. 6, pp. 285-296, Nov. 1991.
[35]C. S. Moo, C. R. Lee, and Y. C. Chuang, “A Protection Circuit for Electronic Ballasts with Self- Excited Series-Load Resonant Inverter,” IEEE International Conference on Industrial Electronics Control and Instrumentation, pp. 1116- 1121, 1996.
[36]C. L. Tsay, H. S. Chun, L. M. Wu, and K. S. Kwan, “Development of the Versatile Electronic Ballast For Metal Halide Lamps with Phase-Shift Soft-Switching Control,” IEEE Industry Applications Society Annual Meeting, Vol. 4, pp. 2112-2119, 1996.
[37]Philips Semiconductors, “UBA2021 570V Drive IC for CFL and TL Lamps,” Application Note AN98099, 1998.
[38]International Rectifier “Self-Oscillation Half-Bridge Drive,” Control Integrated Circuit Designers,” Manual, pp. B199-B204,1994.
[39]J. Adams, T. J. Ribarich, and J. Ribarich, “A New Control IC for Dimmable High-Frequency Electronic Ballasts,” IEEE Applied Power Electronics Conference and Exposition, pp. 713-719, 1999.
[40]I. S. Yeo, D. H. Lee, and S. B. Song, “A Simple Electronic Starter Capable of End-Of-Life Protection for Fluorescent Lamps,” IEEE Applied Power Electronics Conference and Exposition, pp. 473-479, 1999.
[41]J. M. Alonso, A. J. Calleja, F. J. Ferrero, E. Lopez, J. Ribes, and M. Rico-Secades, “Signle-Stage Constant-Wattage High-Power-Factor Electronic Ballast with Dimming Capability,” IEEE Power Electronics Specialist Conference, pp. 2021-2027, 1998.
[42]R. G. Gibson, “Dimming of Metal Halide Lamps,” Journal of the Illuminating Engineering Society, pp. 19-25, Summer 1994.
[43]J. S. Subjak and J. S. Mcquilkin, “Harmonics-Causes, Effects, Measurements, and Analysis: An Update,” IEEE Transactions on Industry Applications, Vol. 26, No. 6, pp. 1032-1042, Nov./Dec. 1990.
[44]R. P. Stratford, “Harmonic Pollution on Power System- A Change in Philosophy,” IEEE Transactions on Industry Applications, Vol. 16, No. 5, Sep./Oct. 1980.
[45]M. E. Amoli and T. Florence, “Power Factor and Harmonic Distortion Characteristics of Energy Efficient Lamps,” IEEE Transactions on Power Delivery, Vol. 4, No. 3, pp. 1965-1969, July 1989.
[46]International Electromechanical Commission IEC 555-2 Standards: Disturbances in Supply Systems caused by Household Appliances and Similar Electrical Equipment, Part 2: Harmonics.
[47]R. O. Brioschi and J. L. F. Vieira, “High-Power-Factor Electronic Ballast with Constant DC-Link Voltage,” IEEE Transactions on Power Electronics, Vol. 13, No. 6, pp. 1030-1037, Nov. 1998.
[48]M. H. Kheraluwala and S. A. Hamamsy, “Modified Valley Fill High Power Factor Electronic Ballast for Compact Fluorescent Lamps,” IEEE Power Electronics Specialist Conference, pp. 10-14, 1995.
[49]J. Qian, F. C. Lee, and T. Yamauchi, “Analysis, Design and Experiments of a High Power Factor Electronic Ballast,” IEEE Applied Power Electronics Conference and Exposition, pp. 1024-1029, 1997.
[50]R. D. O. Brioschi and J. L. F. Vieira, “High-Power-Factor Electronic Ballast with Constant DC-Link Voltage,” IEEE Transactions on Power Electronics, Vol. 13, No. 6, pp. 1030-1037, Nov. 1998.
[51]J. Qian and F. C. Y. Lee, “A High-Efficiency Single-Stage Single-Switch High-Power-Factor AC/DC Converter with Universal Input,” IEEE Transactions on Power Electronics, Vol. 13, No. 4, pp. 699-705, July 1998.
[52]C. S. Moo, C. R. Lee, and T. F. Lin, “A High-Power-Factor Dc-link Resonant Inverter,” IEEE Transactions on Industrial Electronics, Vol. 46, No. 4, pp. 814-819, Aug. 1999.
[53]C. S. Moo, C. R. Lee, and H. C. Yen, “A High-Power-Factor Constant-Frequency Electronic Ballast for Metal Halide Lamps,” IEEE Power Electronics Specialist Conference, pp. 1755-1760, May, 1998.
[54]C. S. Moo, T. F. Lin, and Y. C. Chuang, “An Electronic Ballast for Operating Fluorescent Lamps in Wide Temperature Range,” IEEE Applied Power Electronics Conference and Exposition, pp. 577-583, 2000.
[55]T. F. Wu, C. Y. Lee, Y. J. Wu, and J. Y. Su, “Improvement on Component Stresses of Single-Stage Electronic Ballasts,” IEEE Industry Applications Society Annual Meeting, pp. 285-292, 1999.
[56]H. Güldner, K. Lehnert, F. Böhme, and F. Raiser, “Principles of Electronic Ballasts for Fluorescent Lamps- an Overview,” IEEE Power Electronics Specialist Conference, pp. 19-25, 1999.
[57]T. F. Wu, T. H. Yu, and M. C. Chiang, “Single-Stage Electronic Ballast with Dimming Feature and Unity Power Factor,” IEEE Transactions on Power Electronics, Vol. 13, No.3, pp. 586-597, May 1998.
[58]C. S. Moo, T. F. Lin, and Y. C. Hsieh, “A Single-Stage High Power Factor Electronic Ballast for Fluorescent Lamps with Constant Power Operation,” IEE Proceedings-Electric Power Application, Vol. 148, No. 5, pp. 465-468, Sep. 2001.
[59]Recommendations for Ignitors for Metal Halide Lamps HQI, OSRAM, Feb. 1988.
[60]W. M. Flanagan, Handbook of Transformer Design & Applications, McGraw-Hill, Inc. New York, 1992.
[61]C. S. Moo, T. F. Lin, and Y. C. Chuang, “Design an Ignitor for Short-Arc Xenon Lamps,” IEEE Industry Applications Society Annual Meeting, pp 612-617, 1999.
[62]W. D. Greason, Z. Kucerovsky, S. Bulach, and M. W. Flatley, “Investigation of the Optical and Electrical Characteristics of a Spark Gap,” IEEE Industry Applications Society Annual Meeting, pp. 2059-2064, 1996.
[63]D. Klien, “A New Heating Concept for Fluorescent Lamp Ballasts,” IEEE Industry Applications Society Annual Meeting, pp. 3428-3433, Oct. 2000.
[64]E. E. Hammer, “Photocell Enhanced Technique for Measuring Starting Electrode Temperature of Fluorescent Lamps,” IEEE Industry Applications Society Annual Meeting, pp.2313-2333, Oct. 1997.
[65]C. S. Moo, H. C. Yen, and Y. C. Hsieh, “Fluorescent Lamp Model for High-Frequency Electronic Ballasts,” IEEE Industry Applications Society Annual Meeting, pp.3361-3366, Oct. 2000.
[66]Y. Ji, R. Davis, C. O’Rourke, and W. M. Chui, “Compatibility Testing of Fluorescent Lamp and Ballast Systems,” IEEE Transactions on Industry Applications, Vol. 35, No. 6, pp. 1271-1276, Nov./Dec. 1999.
[67]E. E. Hammer, “High Frequency Characteristics of Fluorescent Lamps up to 500kHz,” Journal of the Illuminating Engineering Society, pp. 52-61, Winter 1987.
[68]M. Graovac, F. P. Dawson, M. Fila, and D. E. Cormack, “Fluorescent Lamp Cold Environment Performance Improvement,” IEEE Industry Applications Society Annual Meeting, pp. 2158-2163, 1998.
[69]E. E. Hammer, “Effects of Ambient Temperature on the Performance of Bent Tube Fluorescent Lamps,” IEEE Transactions on Industry Applications, Vol. 25, No. 2, pp. 216-223, March/April 1989.
[70]E. E. Hammer, “Starting Voltage Comparisons with Various Bent Tube Fluorescent Lamps,” Journal of the Illuminating Engineering Society, pp. 2-14, Winter 1990.
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top
無相關期刊