跳到主要內容

臺灣博碩士論文加值系統

(44.210.21.70) 您好!臺灣時間:2022/08/15 09:06
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

: 
twitterline
研究生:鄭錦智
研究生(外文):Jin-Jhy Jeng
論文名稱:降低遙場渦電流檢測評估誤差之研究
論文名稱(外文):Study on Reducing Evaluation Error of Remote Field Eddy Current Testing
指導教授:吳學鑑
指導教授(外文):Shyue-Jian Wu
學位類別:博士
校院名稱:國立中山大學
系所名稱:機械工程學系研究所
學門:工程學門
學類:機械工程學類
論文種類:學術論文
論文出版年:2002
畢業學年度:90
語文別:中文
論文頁數:93
中文關鍵詞:變異分析數學補償法遙場渦電流換熱器
外文關鍵詞:Remote Field Eddy CurrentHeat exchangerAnalysis of VarianceMathematical Compensation Method
相關次數:
  • 被引用被引用:3
  • 點閱點閱:446
  • 評分評分:
  • 下載下載:51
  • 收藏至我的研究室書目清單書目收藏:1
封面
摘要
ABSTRACT
目錄
圖目錄
表目錄
第一章 緒論
1.1 前言
1.2 文獻回顧
1.3 本文組織架構
第二章 遙場渦電流基本理論及檢測原理
2.1 遙場渦電流之數學理論
2.2 遙場渦電流檢測原理
2.3 集膚深度理論
第三章 實驗數據統計分析理論及影響遙場渦電流準確度原因探討
3.1 實驗數據之變異分析及檢定原理
3.2 檢測準確度影響因素分析及實驗規劃
第四章 數學補償模式之理論推導
第五章 實驗測試結果分析及討論
5.1 影響檢測準確度因素之實驗結果分析及討論
5.2 數學補償模式應用之結果分析及討論
第六章 結論與建議
附錄
參考文獻
1. Schmidt, T.R. “History of the Remote-Field Eddy Current Inspection Technique, ” Materials Evaluation, Vol.47, No.1, pp. 14-22 (1989).
2. Mackintosh, D.D., Atherton, D.L. and Sullivan, S.P. “Remote-Field Eddy Current Signal Analysis in Small-Bore Ferromagnetic Tubes, ” Materials Evaluation, Vol. 51, No.4, pp. 492-495 (1993).
3. Schmidt, T.R.“The Remote Field Eddy Current Inspection Technique , ” Materials Evaluation, Vol. 42, No.2, pp. 225-230 (1984).
4. Mackintosh, D.D., Atherton, D.L. , Schmidt, T.R. and Russell, D.E. “Remote Field Eddy Current for Examination of Ferromagnetic Tubes ,” Materials Evaluation, Vol. 54, No.6, pp. 652-657 (1996).
5. Brown,D.J. and Le, Q.V.“Application of the Remote-Field Eddy Current Technique to The In-Service Inspection of Ferromagnetic,” Materials Evaluation, Vol. 47, No.1, pp. 47-55, (1989).
6. Sullivan, S., Atherton, D.L. and Schmidt, T.R.“Comparing a One-Dimensional Skin Effect Equation with Through Transmission Eddy Current Phenomena, ” British Journal of Nondestructive Testing, Vol. 32, No.2, pp. 71-75 (1990).
7. Kilgore, R.J. and Ramchandran, S. ,“Remote-Field Eddy Current Testing of Small-Diameter Carbon Steel Tubes, ”Materials Evaluation, Vol. 47, No.1, pp. 32-36(1989).
8. Maclean, M.D.“Defect Characterization by the Remote Field Eddy Current Technique in Small-Diameter Tubing, ” Materials Evaluation, Vol. 47, No.1, pp. 24-28 (1989).
9. Atherton, D.L., Czura, W., and Schmidt, T.R. “ Finite Element Calculations for Shields in Remote-Field Eddy Current Tools,” Materials Evaluation, Vol. 47, No. 9, pp.1084-1088 (1989)
10. Atherton, D.L., Czura, W., Schmidt, T.R., Sullivan, S. and Toal, C. “Use of Magnetically-Saturated Regions in Remote Field Eddy Current Tools,” Journal of Nondestructive Evaluation, Vol. 8, No. 1, pp.37-43 (1989)
11. Atherton, D.L., Mackintosh, D.D., Sullivan, S.P., Dubois, J.M.S. and Schmidt, T.R. “Remote Field Eddy Current Signal Representation,” Materials Evaluation, Vol. 51, No. 7, pp.782-789 (1993)
12. Atherton, D.L., and Czura, W. “ Finite Element Calculations for Remote Field Eddy Current Inspection Tools , ” Electrosoft, Vol. 2, No. 2/3, pp.157-174 (1991)
13. Mackintosh, D.D., Atherton, D.L. and Puhach, P.A. “ Through-Transmission Equations for Remote-Field Eddy Current Inspection of Small-Bore Ferromagnetic Tubes,” Material Evaluation, Vol. 51, No. 6 , pp.744-748 (1993)
14. Harold, R. L., “ Analysis of Variance in Experimental Design,” Springer-Verlag, pp13-46 (1991).
15. Olive, J. D., Virginia, A. C., “Applied Statistics: Analysis of Variance and Regression ,” John Wiley & Sons, pp 70-156(1987).
16. Graybill, F. A. , “Theory and Application of the Linear Model,” Wadsworth, pp 654-655(1976).
17. 黃俊英,多變量分析,第52-65頁,中國經濟企業研究所,台北(1986)。
18. 馮文俊,應用線性迴歸,第6-35頁,五南圖書出版公司,台北(1996)。
19. 張輝煌,統計與機率,第225頁,建興出版社,台北(1990)。
20. ASME ‘Boiler and Pressure Vessel Code’ SECTION II Part A, Material Specifications (1988).
21.ASTM E2096, ‘Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing’ (2000).
22. Dodd, C. V., “ Application of a Phase-Sensitive Eddy Current Instrument,” Materials Evaluation, Vol. 22, No. 6, pp.260-262 (1964).
23. Dodd, C. V., “A Portable Phase —Sensitive Eddy Current Instrument,” Materials Evaluation, Vol. 26, No. 3, pp.33-36 (1968).
24. Dodd, C. V., “ Solutions to Electromagnetic Induction Problems,” Ph.D. dissertation, University of Tennessee, Knoxville, June (1967).
25. Muzhitskii, V. F., and Smirnov, A. S., “ Phase-Sensitive Method of Electromagnetic Flaw Detection,” Soviet Journal of Nondestructive Testing, pp. 7-13(1973).
26. Lord, W., and Palanisamy, R., “Development of Theoretical Models for Nondestructive Testing Eddy-Current Phenomena,” in Eddy-Current Characterization of Materials and Structures, ed. G. Birnbaum and G. Free, STP 772, ASTM, Philadelphia, PA. (1981).
27. Kituta, T., Fisher, J. L., Rowland, S. N., and Jolly ,W. D., “ Far-Field Eddy Current Model for Carbon Steel Gas Pipes,” the 5th International Symposium on Offshore Mechanics and Arctic Engineering (OMAE), Dallas, TX (1985).
28. Rowland, S. N., Burkhardt, G., and Birring, A. S., “ Electromagnetic Methods to Detect Corrosion in Aircraft Structure,” Review of Progress in Quantitative Nondestructive Evaluation , Vol. 5B, pp. 1549-1557 (1985).
29. Rowland, S. N., “ Examination of Carbon Steel Tubing,” Materials Evaluation, Vol. 43 , No. 11, pp.1382-1383 (1985).
30. Palanisamy, R., “ Finite Element Modeling of Eddy Current Nondestructive Testing Phenomena, ” Ph.D. dissertation, Colorado State University (1980).
31. Palanisamy, R., “ Theoretical Prediction of Remote-Field Eddy Current Response for the Nondestructive Evaluation of Metallic Tube,” Journal of Applied Physics, Vol. 61, No. 8, Part IIA, pp. 3202-3204 (1987).
32. Atherton, D. L., Szpunar, B., and Sullivan, S., “ The Application of Finite-Element Calculations to the Remote-Field Inspection Technique,” Materials Evaluation, Vol. 45, No. 9, pp. 1083-1086 (1987)
33. Lord, W., Sun ,Y.-S., Udpa, S. S., and Nath, S., “ A Finite Element Study of the Remote-Field Eddy Current Phenomenon,” IEEE Transactions on Magnetic, Vol. 24, No.1, pp. 435-438 (1988).
34. Ida, N., Palanisamy, R., and Lord, W., “ Eddy Current Probe Design Using Finite Element Analysis,” Materials Evaluation, Vol. 41, No. 12, pp. 1389-1394 (1983).
35. Shatat, A., Atherton, D. L., “ Remote Field Eddy Current Inspection of Support Plate Fretting Wear,” Materials Evaluation, Vol. 55, No 3, pp 361-366 (1997).
36. 陶旺斌、周在杞,電磁檢測,杭空工業出版社,北京 (1995)。
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top