|
[1]Edward M. Mielnik, "Metalworking Science and Engineering," McGraw- Hill, Inc. New York ,San Francisco (1993).[2]李榮顯 編著, "塑性加工學" 三民書局 印行 (1996)。[3]日本塑性加工學会 編, "押出し加工─基礎から先端技術まで" コロナ東京 (1992)。[4]K. Osakada, M. Limb and P. B. Mellor, "Hydrostatic Extrusion of Composite Rods with Hard Cores," International Journal of Mechanical Sciences, Vol. 15 (1973) pp. 291-307.[5]N. Inoue and M. Nishihara, "Hydrostatic Extrusion," Elsevier Applied Science Publishers LTD., (London and New York) (1985).[6]B. Avitzur, "Analysis of Wire Drawing and Extrusion Through Conical Dies of Large Cone Angle," Journal of Engineering for Industry, Transactions of the ASME, (1964) pp.305-316. [7]C. T. Chen and F. F. Ling, "Upper-Bound Solutions to Axisymmetric Extrusion Problems," International Journal of Mechanical Sciences, Vol. 10, (1968) pp.863-879.[8]K. Osakada and Y. Niimi, "A Study on Radial Flow Field for Extrusion Through Conical Dies," International Journal of Mechanical Sciences, Vol. 17, (1975) pp. 241-254.[9]V. Nagpal, " General Kinematically Admissible Velocity Field for Some Axisymmetric Metal Forming Problems," Journal of Engineering for Industry, Transactions of the ASME, (1974) pp.1197-1201. [10]V. Nagpal, "Analysis of Plane-strain Extrusion Through Arbitrarily Shaped Dies Using Flow Function," Journal of Engineering for Industry, Transactions of the ASME, (1977) pp.754-758.[11]T. Yoshihiro, S. Yasuyuki, T. Kenzo and S. Akio, "An Application of the Stream Function in the Formulation of a Method of Solution for Plane Strain Steady State Plastic Forming Processes," Journal of the JSTP Vol. 22, No. 244, (1981-5) pp.452-459.[12]D. Y. Yang, C. H. Han and B. C. Lee, "The Use of Generalised Deformation Boundaries for the Analysis of Axisymmetric Extrusion Through Curved Dies," International Journal of Mechanical Sciences, Vol. 27, No. 10, (1985) pp. 653-663.[13]M. S. Ragab, A. S. Wifi and G. M. A. Galal, "On the Deformation of imetal Wires by Drawing," Journal Materials Shaping Technology, Vol. 9, No. 2 (1991) pp.67-75.[14]A. K. Tayal and R. Natarajan, "A Finite Element Analysis of Axisymmetric Extrusion of Composite Rods," International Journal Machine Tool Design Research, Vol. 21, No. 3/4, (1985) pp.227-235.[15]D. Y. Yang, T. G. Kim and C. M. Lee, "An Upper-Bound Solution for Axisymmetric Extrusion of Composite Rods Through Curved Dies," International Journal Machine Tools Manufacturing, Vol. 31, No. 4 (1991) pp.565-575.[16]J. L. Alcaraz and J. G. Sevillano, "Safety maps in bimetallic extrusion," Journal of Materials Processing Technology 60, (1996) pp.133-140.[17]R. Silwa, "Plastic Zones in the Extrusion of Metal Composite," Journal of Materials Processing Technology 67 (1997) pp.29-35.[18]H. Li. D. Pugh and A. H. Low, "The Hydrostatic Extrusion of Difficult Metals," Journal of the Institute of Metals, Vol. 93 (1964-65) pp.201-217.[19]A. W. Duffill, P. B. Mellor and S. A. Tobias, "The Design and Development of a Hydrostatic Extrusion Machine," International Journal Machine Tool Design Research, Vol. 8, (1968) pp.125-140.[20]B. Avitzur, "Hydrostatic Extrusion," Journal of Engineering for Industry, Transactions of the ASME, (1965) pp.487-494.[21]N. S. Cho and D. Y. Yang, "Hydrofilm Extrusion of Tubes Through Optimized Curved Dies," Journal of Engineering for Industry, Transactions of the ASME, Vol. 105 (1983) pp.243-250.[22]W. Zoerner, A. Austen and B. Avitzur, "Hydrostatic Extrusion of Hard Core Clad Rod," Journal of Engineering for Industry, Transactions of the ASME, 31 (1972) pp.78-80.[23]Y. Yamaguchi, M. Noguchi, T. Matsushita and M. Nishihara, "Hydrostatic Extrusion of Clad Materials," Journal of the JSTP Vol. 15, No. 164, (1974-9) pp.723-729.[24]J. M. Story, B. Avitzur and W. C. Hahn, "The Effect of Receiver Pressure on The Observed Flow Pattern in The Hydrostatic Extrusion of Bimetal Rods," Journal of Engineering for Industry, Transactions of the ASME, (1976) pp.909-913.[25] L. A. Pacheco and J. M. Alexander, "On the Hydrostatic Extrusion of Copper-Covered Aluminum Rods," International Conference on Numerical Methods in Industry Forming Process, (1982) pp.205-216.[26]H. J. Park, K. H. Na, N. S. Cho, Y. S. Lee and S. W. Kim, "A Study of Hydrostatic Extrusion of Copper-Clad Aluminum Tube," Journal of Material Processing Technology 67 (1997) pp.24-28.[27]P. B. Mellor, "Tensile Instability in Thin-Walled Tubes," Journal Mechanical Engineering Science Vol. 4, No. 3, (1962) pp.251-256. [28] B. Avitzur, R. Wu, S. Talbert and Y. T. Chou, "Criterion for the Prevention of Core Fracture During Extrusion of Bimetal Rods," Journal of Engineering for Industry, Transactions of the ASME, Vol. 104, (1982) pp.293-304.[29]B. Avitzur, R. Wu, S. Talbert and Y. T. Chou, "An Analytical Approach to the Problem of Core Fracture During Extrusion of Bimetal Rods," Journal of Engineering for Industry, Transactions of the ASME, Vol. 107, (1985) pp.247-253.[30]B. Avitzur, R. Wu, S. Talbert and Y. T. Chou, "Analysis of Core Fracture in Drawing of Bimetal Rods and Wires," Journal of Engineering for Industry, Transactions of the ASME, Vol. 108, (1986) pp.133-140.[31]R. Onodera, K. Hokamoto and M. Aramaki, "Numerical Analysis for Inhomogeneous Deformation of Bimetal Rods During Extrusion," Journal of the JSTP Vol. 33 No. 376, (1992-5) pp.543-549.[32]工藤英明 著, "基礎機械工學全書 3 塑性學," pp.198-210 森北出版株式会社 日本 東京 (1968)。[33]Napgal, Vijay, "Alower Upper-Bound Approach to Some Metal Forming Problems," Georgia Institute of Technology, Ph.D.,1974 Engineering,Mechanical, pp51.[34]黃永茂、徐宏修 著, "應用流線函數法於複合板壓延解析之研究" 國立中山大學，碩士論文，(1992)[35]William F. Hosford and Robert M. Caddell, "Metal Forming : mechanics and metallurgy," Prentice-Hall, Inc., Englewood Cliffs. New York (1983). [36]後藤 學 著, "塑性學" pp.103-112 コロナ社 東京 (昭和57)。[37] H. Li. D. Pugh, "Mechanical Behaviour of Materials Under Pressure," Applied Science Publishers LTD., (London) (1971). [38]C.H. Lee and T. Altan, "Influence of flow stress and friction upon metal flow in upset forging of rings and cylinders," Journal of Engineering for Iindustry, Transactions of the ASME, 31, (1972) pp.775-782
|