跳到主要內容

臺灣博碩士論文加值系統

(3.236.84.188) 您好!臺灣時間:2021/08/03 09:29
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:黃舒儀
研究生(外文):shuyi Huang
論文名稱:共通閘道介面之化工應用-氣、液體物性查詢與估算
論文名稱(外文):Common Gateway Interface for Chemical Industry Applications in Gas and Liquid Property Search and Estimation
指導教授:謝樹木謝樹木引用關係林鎮國林鎮國引用關係
學位類別:碩士
校院名稱:東海大學
系所名稱:化學工程學系
學門:工程學門
學類:化學工程學類
論文種類:學術論文
論文出版年:2002
畢業學年度:90
語文別:中文
論文頁數:106
中文關鍵詞:液體物性查詢與估算共通閘道介面
外文關鍵詞:Common Gateway InterfaceGas and Liquid Property Search and Estimation
相關次數:
  • 被引用被引用:0
  • 點閱點閱:192
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本研究透過共通閘道介面(Common Gateway Interface,CGI),架設一伺服器(server)系統,提供氣、液體物性之查詢與估算,是典型之共通閘道介面在化工業之應用(Common Gateway Interface for Chemical Industry Applications,即CGICIA)。
本物性查詢與估算系統以C++撰寫而成,主要查詢與估算的物性包括有飽和蒸氣壓、熱容、黏度、熱傳導係數、擴散係數…等多種性質。系統中建有一物性資料庫,內含有618種化合物之近20項基本物性常數及參數。物性估算所需之參數皆由資料庫中取得並代入相關的經驗或半經驗式中完成計算。物性估算方程式是除了參考“The Properties of Gases and Liquids”by R. C. Reid, J. M. Prausnitz and B. E. Poling 撰寫而成,也引入著名的group contribution method 和group interaction contribution method,選擇性高。
本系統架設在IBM個人電腦上,使用PentiumIII-450MHz處理器、256RAM的記憶體並操作在微軟windows 2000 server的作業系統上。測試結果顯示,本系統在物性的估算與查詢具有穩定和即時回應之效果。
This study, utilizing the common gateway interface (CGI), constructs a server system to provide the search and estimation of the properties of gases and liquids. It is a typical common gateway interface for chemical industry application (CGICIA).
The property search and estimation system is written in C++ programming language. Major property search and estimation are heat capacity, saturated vapor pressure, viscosity, thermal conductivity, diffusion coefficients and so on. A data bank consisting of 618 compounds with more than 20 basic data or parameters for each compound is built. For property estimation, parameters are retrieved form data bank and plugged into various empirical or semi-empirical equations to complete the computation. Most of the property estimation equations are from“The Properties of Gases and Liquids”by R. C. Reid, J. M. Prausnitz and B. E. Poling. Alternatively, the well-known group contribution method and its modified counterpart group interaction contribution method are included.
The system has been tested in an IBM-compatible personal computer with PentiumIII-450MHz processor and 256MB RAM, running on Microsoft windows 2000 server operating system. Performance is excellent for both the property search and estimation. The system is stable and response is prompt.
目 錄
頁次
中文摘要....................................................III
英文摘要.....................................................Ⅳ
誌 謝.....................................................Ⅴ
目 錄.....................................................Ⅵ
圖 目 錄...................................................VIII
表 目 錄......................................................X
符號說明.....................................................XI
第一章 緒論..................................................1
1.1 物性與製程設計與模擬......................................1
1.2 全球資訊網與共通閘道介面................................2
1.3 研究動機與目的..........................................3
第二章 文獻回顧..............................................4
2.1 國際著名物性研究機構......................................4
2.1.1 DIPPR...................................................4
2.1.2 FPRI....................................................5
2.1.3 CODATA..................................................5
2.2 物性資料庫................................................6
2.2.1 DIPPR資料庫.............................................6
2.2.2 PPDS資料庫..............................................7
2.2.3 DECHEMA資料庫..........................................11
第三章 CGI共通閘道介面......................................14
3.1 全球資訊網應用架構.......................................14
3.2 CGI簡介..................................................16
3.3 CGI原理..................................................16
3.3.1 CGI運作架構.........................................16
3.3.2 CGI環境與運作..........................................19
3.3.3 CGI資料輸入............................................20
3.3.4 CGI資料輸出............................................25
3.3.5 CGI與FORM..............................................25
3.4 CGI撰寫工具..............................................31
第四章 物性蒐集評估架構建立.................................34
4.1系統設計..................................................35
4.1.1 系統運作...............................................35
4.1.2系統架構................................................36
4.2系統建構..................................................44
4.2.1伺服系統軟、硬體........................................44
4.2.2網頁製作................................................45
4.2.3關連式資料系統之建立....................................45
第五章 結果與討論 ...........................................47
5.1 CGICIA_THU使用流程.....................................47
5.1.1資料庫查詢流程.......................................53
5.1.2 Group contribution估算方法流程......................54
5.1.3其它估算方法流程.....................................58
5.2 物性查詢計算測試與結果討論...............................63
第六章 結論與建議...........................................75
6.1 結論.....................................................75
6.2 建議.....................................................76
參考文獻.....................................................77
附 錄......................................................82
簡 歷.....................................................94
李勁,WINDOWS SERVER 使用手冊, 文魁資訊股份有限公司(2000)
李澄興,吳崇弘,CGI程式設計, 文魁資訊股份有限公司(2000)
周正晃,“物性資料庫之簡介,”化工, 第41卷,第2期, 85 (1994)
邱彥博,林浩豐,CGI 徹底研究, 全華科技圖書股份有限公司 (1998)
林鎮國,“化工應用計算“, http://140.96.175.19/, (1997)
陸承志,李榮得,“全球資訊網CGI技術研究與應用,”技術學刊,第12卷,第4期,673 (1997)
黃莉婷,“WWW創造全球性多媒網路“,網路通訊雜誌,24 (1994)
葉來巡,“製程模擬物性資料庫,”化工技術, 第2卷,第2期,116 (1994)
廖信彥,CGI應用大全, 博碩文化股份有限公司 (1997)
鄭靜,“讓 Mosaic 為您傳話”,開放系統與網路,187 (1994)
Andersen, P. M., E. A. Brignole, and Aa. Fredenslund,“A Multiple-Purpose Phase Equilibrium Package for Separation Process Simulation and Design,”I. Chem. Eng. Symp. Seer., 92, 313 (1985).
Ambrose, D“Correlation and Estimation of Vapor-Liquid Critical Properties:I. Critical Temperatures of Organic Compounds,”NPL Rep. Chem.,Nat.Physical Lab., Teddington, UK (1978)
Brignole, E. A.,S. Bottini, and R. Gani,“A Strategy for Design and Selection of Solvents for Separation Processes,”Fluid Phase Equilibria, 29, 125 (1986).
Constantinou, L., S. E. Prickett, and M. L. Mavrovouniotis“Estimation of Thermodynamic and Physical Properties of Acyclic Hydrocarbons Using the ABC Approach and Conjugation Operators,” Ind. Eng. Chem. Res., 32, 1734 (1994)
Constantinou, L., and R. Gani, “New Group Contribution Method for Estimating Properties of Pure Compounds,”AICHE J., 40, 1697 (1994)
Constantinou, L., S. E. Prickett, and M. L Mavrovouniotis, Compounds Using Conjugation Operators,“Estimation of Properties of Acyclic Organic Compounds Usng Conjugation Operator,”Ind. Eng. Chem. Res., 39, 395 (1994)
Daubert, T. E., and R. P. Danner, Physical and Thermodynamic Properties of Pure Compounds: Data Compilation, Hemisphere, New York (1989).
Daubert, T. E., and R. Bartakovits,“Prediction of Critical Temperature and Pressure of Organic Compounds by Group Contribution,”Ind. Eng. Chem. Res., 28, 638 (1989).
Eric, C. C.,“Don’t Gamble With Physical Properties For Simulations,”Chemical Engineering Progress,120, 35 (1996)
Egan, B. Z., D. D. Lee, and D. A. McWhirter,“Solvent Extraction and Recovery of Ethanol from Aqueous Solutions,”Ind. Eng. Chem. Res., 27, 1330 (1988).
Fedors, R. F.,“A Method to Estimate Critical Volumes,”AICHE J., 25(1), 202 (1979)
Gani R., B. Nirlsen, and Aa. Fredenslund,“A Group Contribution Approah to Computer-Aided Molecular Design,”AICHE J., 37(9), 1318 (1991).
Gani R., J. Perregaard, and H. Johansen,“Simulation Strategies for Design and Analysis of Complex Chemical Processes,”Trans. IchemE, 68, 407 (1990)
Gani, R., and E. A. Brignole,“Molecular Design of Solvents for Liquid Extraction Based on UNIFAC,” Fluid Phase Equilibria, 13, 331 (1983).
Joback, K. G. and R. C. Reid,“Estimation of Pure-Component Properties from Group Contributions,”Chem. Eng. Comm., 57, 233 (1987).
Klotz, H. C., T. W. Copeman, H. L. Vines, and E. J. Miller,“What’s the impact of
bad data on NRU Designs?”Hydrocarbon Process, 62, 84 (1983).
Klincewicz, K. M. and R. C. Reid, “Estimation of Critical Properities with Group Contribution Methods,”AICHE J.,30, 137 (1984).
Kontogeorgis, G., I. F. Smirlis, V. I. Harismiadis, Aa. Fredenslund, and D. P. Tassios,“Vapor Pressure and Saturated Liquid Volume Predicyions with Cubic Equations of State for Medium and High Molecular Weight Compounds”IVC-SEP 92329, Institute for Kemitrknik, The Technical Univ. of Denmark (1993).
Kudchadker, A. P., and B. J. Zwolinski,“Vapor Pressures and Boiling Points of Normal Alkanes, C21 to C100,”J. Chem. Eng. Data, 11(2), 253 (1996).
Leibovici, C. F.,“A Consistent Procedure for the Estimation of Properties Associated to Lumped Systems,”Fluid Phase Equilibr. 87, 189 (1993).
Lydersen, A. L.,“Estimation of Critical Properties of Organic Compounds,”Coll. Eng. Univ. Wisconsin, Engineering Experimental Station Prpt. 3, Madison, WI (1995).
Lyman, W. J., W. F. Reehl, and D. H. Rosenblatt, Handbook of chemical Property Estimation Methods,American Chemical Society, Washington, DC (1990).
Marrero-Morejon J., and E. Pardillo-Fontdevila,“Estimation of pure compound properties using group-interaction contributions,” AICHEJ.45, 615 (1999)
Mavrovouniotis, M. L.,“Estimation of Properties from Conjugate Forms of Molecular Structures: The ABC Approach,”Ind. Eng. Chem. Res.,32, 1734 (1990).
Odele O.,and S. Macchietto,“Computer Aided Molecular Design: A Novel Method for Optimal Solvent Selection,”Fluid Phase Equilibra,82,47 (1993).
Palmer, and A. David, “Handbook of Applied Thermodynamics”,CRC Press, (1983).
Pardillo-Fontdevila E., and R. Gonzalez-Rubio,“A group-contribution approach. A new strategy for the estimation of physico-chemical properties of branched isomers,” Chem. Eng. Commum., 163, 245 (1998).
Petel E. J.,P. A. Lopez, S. B. Bottini, and E. A. Brignole,“Computer-Aided Molecular Design of Solvents for Separation Processes,”AICHE J.,40,1349 (1994).
Poling, B. E., J. M. Prausnitz, and J. P. O'Connell, The Properties of Gases & Liquids, 5th ed., MCGraw Hill, New York (2001).
Reid, R. C., J. M. Prausnitz, and B. E. Poling, The Properties of Gases & Liquids, 4th ed., MCGraw Hill, New York (1987).
Reid, R. C., J. M. Prausnitz, and B. E. Poling, The Properties of Gases & Liquids, 3rd ed., MCGraw Hill, New York (1978).
Sorensen, J. M., and W. Arlt, “Liquid-Liquid Equilibrium Data Callection”DECHEMA,(1980).
Suzuki, T., K. Ohtaguchi, and K. Koide, Computer-assisted approach to develop a new prediction method of liquid viscosity of organic compounds, Computers Chem. Eng. 20,161 (1996)
Teja, A. S., R. J. Lee, D. J. Rosenthal, and M. Anselme,“Correlation of the Critical Properties of Alkanes and Alkanols,”Fluid Phase Equilibr.,56, 153 (1990).
Voulgaris, M. S., S. Stamatakis, K. Magoulas, and D. P. Tassios,“Prediction of Physical Properties of non-Polar Compounds, Petrolreum and Coal Liquid Fractions,”Fluid Phase Equilibr., 64, 73 (1991).
Venkatasubramanian, V., K. Chan, and J. M. Caruthers,“Computer-Aided Molecular Design Using Genetic Algorithms, Computer chem.. Engng., 18, 833 (1994).
連結至畢業學校之論文網頁點我開啟連結
註: 此連結為研究生畢業學校所提供,不一定有電子全文可供下載,若連結有誤,請點選上方之〝勘誤回報〞功能,我們會盡快修正,謝謝!
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top