跳到主要內容

臺灣博碩士論文加值系統

(3.235.56.11) 您好!臺灣時間:2021/07/29 10:53
字體大小: 字級放大   字級縮小   預設字形  
回查詢結果 :::

詳目顯示

我願授權國圖
: 
twitterline
研究生:張家豪
研究生(外文):Chia-Hao Chang
論文名稱:一種動態電壓恢復器之研製
論文名稱(外文):An Implementation of a Dynamic Voltage Restorer
指導教授:盧展南盧展南引用關係
指導教授(外文):Chan-Nan Lu
學位類別:碩士
校院名稱:國立中山大學
系所名稱:電機工程學系研究所
學門:工程學門
學類:電資工程學類
論文種類:學術論文
論文出版年:2004
畢業學年度:92
語文別:中文
論文頁數:116
中文關鍵詞:濾波器動態電壓恢復器
外文關鍵詞:Dynamic Voltage RestorerFilter
相關次數:
  • 被引用被引用:7
  • 點閱點閱:88
  • 評分評分:
  • 下載下載:0
  • 收藏至我的研究室書目清單書目收藏:0
本論文討論一種動態電壓恢復器的設計與製作。當市電上游發生電力擾動時,動態電壓恢復器能迅速地引入補償電壓至市電迴路中以恢復末端用戶電壓至正常的狀態。本論文所提出之控制法則是採用參考電壓追蹤的觀念。動態電壓恢復器之濾波器在本論文中也透過電路理論的方式加以分析。此外,文中亦透過套裝軟體Matlab-simulink/PSB對本文所提之方法與其他不同的控制方法進行模擬比較,以驗證本論文所提方法之效力。本研究建立一2.18 KVA 動態電壓恢復器的雛型來驗證所提方法之效能。
The design and implementation of a dynamic voltage restorer (DVR) is presented in this thesis. The proposed DVR can restore the end-user voltage to its normal level by rapidly injecting a compensating voltage onto the power line against the upstream power disturbances. The control algorithm uses the concept of reference voltage tracking method. Based on the electric circuit theory, the filter of the DVR is also analyzed. Besides, performance of the proposed method is simulated and compared with other different control methods by using Matlab-simulink/PSB. The results show the effectiveness of the proposed method. A 2.18 KVA DVR prototype is implemented to verify the performance of the proposed method.
目錄
中文摘要-------------------------------------------------------------------- I
英文摘要------------------------------------------------------------------- II
目錄------------------------------------------------------------------------ III
圖目錄---------------------------------------------------------------------- V
表目錄-------------------------------------------------------------------- XII

第一章 緒論------------------------------------------------------------- 1
1-1 研究動機與目標-------------------------------------------------- 1
1-2 電壓擾動問題----------------------------------------------------- 3
1-3 電壓驟降的改善方法與常見的補償設備------------------- 13
1-4 動態電壓恢復器之相關控制法則---------------------------- 20
1-5 論文組織架構--------------------------------------------------- 26

第二章 動態電壓恢復器控制法則之比較與模擬分析---------- 27
2-1 控制法比較模擬系統------------------------------------------- 27
2-2 正序同步參考座標電壓控制法------------------------------- 29
2-3 正、負序同步參考座標電壓控制法------------------------- 36
2-4 三相電壓追蹤控制法------------------------------------------- 44
2-5 比較與討論------------------------------------------------------ 49

第三章 一種動態電壓恢復器之系統設計------------------------- 53
3-1 系統架構與動作原理------------------------------------------- 53
3-2 換流器------------------------------------------------------------ 58
3-3 濾波器設計------------------------------------------------------ 63
3-4 硬體電路製作--------------------------------------------------- 69

第四章 測試結果與討論--------------------------------------------- 76
4-1 測試環境與條件設定------------------------------------------- 76
4-2 線性負載測試--------------------------------------------------- 78
4-2.1 單相電壓驟降測試-------------------------------------- 78
4-2.2 三相電壓驟降測試測試-------------------------------- 82
4-2.3 市電不平衡且含諧波情況下之電壓驟降測試------ 86
4-3 非線性負載測試------------------------------------------------- 92
4-3.1 單相電壓驟降測試-------------------------------------- 92
4-3.2 三相電壓驟降測試測試-------------------------------- 97
4-3.2 市電不平衡且含諧波情況下之電壓驟降測試----- 103
4-4 總結-------------------------------------------------------------- 108

第五章 結論與未來研究方向-------------------------------------- 109
5-1 結論-------------------------------------------------------------- 109
5-2 未來研究方向-------------------------------------------------- 109

參考文獻---------------------------------------------------------------- 111
附錄 實際硬體電路照片-------------------------------------------- 116
參考文獻
[1]W. E. Brumsickle, G .A Luckjiff, R. S. Schneider, D. M Divan, M. F McGranaghan, “Dynamic Sag Correctors: Cost Effective Industrial Power Line Conditioning,” Proceedings of Industry Applications Conference, 1999. Thirty-Fourth IAS Annual Meeting, Vol.2, 1999, pp. 1339-1344.
[2]M. F. McGranaghan, D. R. Mueller, and M. J. Samotyj, “Voltage Sags in Industrial Systems,” Proceedings of Industry and Commercial Power Systems Technical Conference, 1991, pp. 18-24.
[3]M. F. McGranaghan, D. R. Mueller, and M. J. Samotyj, “Voltage Sags in Industrial Systems,” IEEE Transactions on Industrial Applications, Vol. 29, No. 2, March/April 1993, pp. 397-403.
[4]R. D. Henderson and P. J. Rose, “Harmonics: The Effects on Power Quality and Transformers,” IEEE Trans. on Industry Applications, Vol. 30, No. 3, May/June 1994, pp. 528-532.
[5]A. Sannino, M. G. Miller and M. H. J. Bollen, “Overview of Voltage Sag Mitigation,” Proceedings of Power Engineering Society Winter Meeting, Vol. 4, 2000, pp.2872-2878.
[6]J. Lamoree, D. Muller, P. Vinett, W. Jones and M. Samotyi, “Voltage Sag Analysis Case Studies,” IEEE Trans. on Industry Applications, Vol. 30, No. 4, July/August 1994, pp. 1083-1089.
[7]F.D. Martzloff, and T.M. Gruzs, “Power Quality Site Surveys:Facts, Fiction, and Fallacies,” IEEE Trans. on Industry Applications, Vol. 24, 1988, pp. 1005-1018.
[8]J. Barros, and R.I. Diego, “Effects of Nonsinusoidal Supply on Voltage Tolerance of Equipment,” Power Engineering Review, IEEE, Vol. 22, 2002, pp. 46-47.
[9]N. H. Woodley, L. Morgan, and A. Sundaram, “Experience with an Inverter-Based Dynamic Voltage Restorer,” IEEE Transactions on Power Delivery, Vol. 14, No. 3, July. 1999, pp. 1181-1186.
[10]S. S. Choi, B. H. Li, and D. M. Vilathgamuwa, “Dynamic Voltage Restoration with Minimum Energy Injection,” IEEE Transactions on Power Systems, Vol. 15, No. 1, Feb. 2000, pp. 51-57.
[11]A. Campos, G. Joos, P. D. Ziogas, and J. F. Lindsay, “Analysis and Design of a Series Voltage Unbalance Compensator Based on a Three-Phase VSI Operating with Unbalanced Switching Functions,” IEEE Transactions on Power Electronics, Vol. 9, No. 3, May. 1994, pp. 269-274.
[12]S. S. Choi, B. H. Li, and D. M. Vilathgamuwa, “A Comparative Study of Inverter- and Line-side Filtering Schemes in the Dynamic Voltage Restorer,” Proceedings of IEEE Power Engineering Society Winter Meeting, Jan. 2000, Singapore, pp. 2967-2972.
[13]L. Xu, E. Acha, V.G. Agelidis, “A New Synchronous Frame-Based Control Strategy for a Series Voltage and Harmonic Compensator,” APEC 2001, p1274-1280.
[14]B. H. Li, S. S. Choi, and D. M. Vilathgamuwa, “A New Control Strategy for Energy-Saving Dynamic Voltage Restoration,” PESC 2000, p1103-1108.
[15]A. Sannino, and J. Svensson, “A Series-Connected Voltage Source Converter for Voltage Sag Mitigation Using Vector Control and a Filter Compensation Algorithm,” Proceedings of IEEE Industry Applications Conference, Vol.4, 2000, pp. 2476-2481.
[16]C.C. Pan, “Design and Implementation of a Voltage Sag Compensator,” National Tsing Hua University Dept. of Electrical Engineering, July 2001.
[17]C.C. Huang, “A New Control Algorithm of Voltage Sag Compensator for Sensitive Industrial Loads,” National Tsing Hua University Dept. of Electrical Engineering, July 2002.
[18]S.A. Yin, C.N. Lu, and E. Liu, “A Survey on High Tech Industry Power Quality Requirements,” Proceedings of IEEE/PES, Transmission and Distribution Conference and Exposition, Vol.1, 2001, pp. 548-553.
[19]D.O. Koval, R.A. Bocancea, K. Yao and M.B. Hughes, “Canadian National Power Quality Survey Frequency and Duration of Voltage Sags and Surges at Industrial Site,” IEEE Trans. on Industry Applications, Vol. 34, No. 5, 1998, pp. 904-910.
[20]C. Radhakrishna, M. Eshwardas, and G. Chebiyam, “Impact of Voltage Sags in Practical Power System Networks,” Proceedings of IEEE/PES, Transmission and Distribution Conference and Exposition, Vol.1, 2001, pp. 567-572.
[21]半導體工廠電力品質研討會講義,國立清華大學主辦,87年12月。
[22]D. Sabin, “An Assessment of Distribution System Power Quality, volume 2: Statistical Summary Report,” EPRI Final Report TR-106294-V2, May. 1996.
[23]M. H. J. Bollen, “Characterization of Voltage Sags Experienced by Three-Phase Adjustable-Speed Drives,” IEEE Trans. Power Delivery, Vol. 12, pp. 1666-1671, Oct. 1997.
[24]M. H. J. Bollen, Understanding Power Quality Problems, IEEE Press, 2000.
[25]M. F. Alves and T. N. Ribeiro, “Voltage Sag: An Overview of IEC and IEEE Standards and Application Criteria,” Proceedings of the 1999 IEEE Transmission and Distribution Conference, Vol. 2, 1999, pp. 585-589.
[26]ITI (CBEMA) Curve Application Note, Information Technology Industry Council, 2000.
[27]SEMI-F47, Specification for Semiconductor Processing Equipment Voltage Sag Immunity.
[28]L. Conrad, K. Little and C. Grigg, “Predicting and Preventing Problems Associated with Remote Fault-Cleaning Voltage Dips,” IEEE Trans. on Industry Applications, Vol. 27, Jan. 1991, pp. 167-172.
[29]IEEE Standard 493-1997, IEEE Recommended Practice for Design of Reliable Industrial and Commercial Power System, Chapter 3, pp.37-78.
[30]C. Hochgraf and R. H. Lasseter, “Statcom Control for Operation with Unbalanced Voltages,” IEEE Trans. on Power Delivery, Vol. 13, No. 2, Apr. 1998, pp. 538-544.
[31]S. Chen and G.. Joos, “Series and Shunt Active Power Conditioners for Compensating Distribution System Faults,” Proceedings of Canada Conference on Electrical and Computer Engineering, Vol. 2, 2000, pp. 1182-1186.
[32]P. S. Sensarma, K. R. Padiyar and V. Ramanarayanan, “A STATCOM for Composite Power Line Conditioning,” Industrial Technology 2000. Proceedings of IEEE International Conference on, Vol. 1, 2000, pp. 542-547.
[33]S. W. Middlekauff and E. R. Collins, Jr., “System and Customer Impact; Considerations for Series Custom Power Devices,” IEEE Trans. on Power Delivery, Vol. 13, No. 1, Jan. 1998.
[34]C. Zhan, M. Barnes, V. K. Ramachandaramurthy and N. Jenkins, “Dynamic Voltage Restorer with Battery Energy Storage for Voltage Dip Mitigation,” Proceedings of Conference on Power Electronics and Variable Speed Drivers, 18-19 Sep. 2000.
[35]S. J. Chiang, C. Y. Yen, and K. T. Chang, “A Multimodule Parallelable Series-Connected PWM Voltage Regulator,” IEEE Trans. on Ind. Electronics, Vol. 48, No. 3, June 2001, pp. 506-516.
[36]江炫章,電力電子學,全華出版社,1999。
QRCODE
 
 
 
 
 
                                                                                                                                                                                                                                                                                                                                                                                                               
第一頁 上一頁 下一頁 最後一頁 top